Rowdys there's no "I" in team Bully 2

[cboggs]

Should be the nose of the chassis somewhat higher than the back ?

No, the skid is meant to have an angle to it, not be flat.

 

[Zarizi Tech]

That's looking badass Rowdy! "thumbsup"

 

[josh6575]

That upper link set up looks low at the chassis front and rear. Is the chassis designed for xr axles where the upper and lowers run closer together?

 

[ROWDY RACING]

Looking really good, stance is perfect.

I agree, nice job with the change over."thumbsup"

Thanks guys! "thumbsup"

Should be the nose of the chassis somewhat higher than the back ?

See below. The shock arms are adjustable if you would like a higher nose and or a lower rear.

No, the skid is meant to have an angle to it, not be flat.

"thumbsup"

That's looking badass Rowdy! "thumbsup"

Thanks Samu. "thumbsup"

That upper link set up looks low at the chassis front and rear. Is the chassis designed for xr axles where the upper and lowers run closer together?

Yes that is the same chassis from my XR, the links are just mocked up, I am sure some tuning will be in order once its RTR.

 

[chevotafun]

Truck is looking awesome man "thumbsup"
Another truck that makes me want to make to change even more to the bully 2's :mrgreen:

 

[ROWDY RACING]

Truck is looking awesome man "thumbsup"
Another truck that makes me want to make to change even more to the bully 2's :mrgreen:

Go for it!

Got my Stubbys back from Brood, they were being rebuilt for the new rig. I put the motors in with the 14t pinions that came with the axles. I have to come up with a battery and electronic mount so I can finish things up. Old wheels and tires on for now until I mount a fresh set of Voodoos to the Dubs...



Geez Iphones take crummy pics...

 

[Hittman]

Looking good Rowdy. Nice build you have goin here. Can't wait to see what your rtr weight will be."thumbsup"

I am contemplating switching to the bully II's.. I dunno if I can't convince myself to leave the xr axles behind thou. Decisions decisions..

 

[ROWDY RACING]

More and slightly better pics. :mrgreen:

 

[ROWDY RACING]

RC4WD knuckle weights arrived today!

Each half weighs 24 grams.

Fit and finish is nice and shiny, for now. :twisted:

I have plans for add on weights to attach to these.

 

[CrawlrKing]

On third picture, how do you mount and clear the Vp hub ?

 

[Rckcrwlr]

RC4WD knuckle weights arrived today!

Just opened my package...you beat me to it. :twisted:

 

[cboggs]

Mines sitting in the mail till I get home from work."thumbsup"

 

[ROWDY RACING]

On third picture, how do you mount and clear the Vp hub ?

I did'nt put a wheel on just did it for a pic.

Just opened my package...you beat me to it. :twisted:

You don't always have to be first. :mrgreen:

 

[Erin]

Do they clear the hub stacked back to back?

Mine should arrive tomorrow.

 

[CrawlrKing]

Do they clear the hub stacked back to back?



Mine should arrive tomorrow.

Erin, where's your B2 thread ?

 

[Erin]

Erin, where's your B2 thread ?

Im still gathering parts......:ror:

 

[xkill]

How wide are the wheels that you are using?
I was looking for voodoos but I what to keep the 0.7'' wheels so I was looking for a cut and shut...

 

[ROWDY RACING]

Do they clear the hub stacked back to back?

Mine should arrive tomorrow.

I don't think so, I will double check tonight.

How wide are the wheels that you are using?
I was looking for voodoos but I what to keep the 0.7'' wheels so I was looking for a cut and shut...

1"

 

[ROWDY RACING]

Cool, it's still nowhere near enough weight for me. :twisted:

 

[cboggs]

Yup."thumbsup" Mounting screws get in the way though.