Rowdys there's no "I" in team Bully 2

[Hoppa]

Yeah, if these fail I be looking in that direction. I had these uni's left over from a build that never happened, figured I'd give it a shot.
The VP vvd's would definitely be less work.

 

[cboggs]

They held up in my XR. I am also looking at ofna shafts but not sure they are thick enough for tangs to fit the locker.

The Ofna shafts I use in my sporty (Dlux) are thicker than the Axial but still not thick enough so they would still need to be built up at the tang and also lathed down towards the uni to fit into the tube.

 

[ROWDY RACING]

Once my bully 2 axles get here I'm going to start working on a knuckle for kyosho 1/8 scale high angle universals. I already have the shafts and all the material for the knuckles. I just need my bully 2s.

Any news before I pull the trigger on alternative options?

 

[rcnut1948]

Chris Im setting my front up to use truggy axels is .180 bully .193 A good file fit will be fine

 

[ROWDY RACING]

Chris Im setting my front up to use truggy axels is .180 bully .193 A good file fit will be fine

Show us when your done, I'm going to try the VP VVD's

BANG! trigger pulled, thanks Tedrockz. "thumbsup"

 

[josh6575]

Which vvd's did you order?

 

[Krawler Konceptz]

24 pages check "thumbsup"
Lots of Drama check "thumbsup"
Even more useful info on the Bully2's priceless!"thumbsup""thumbsup"

Keep up the great work.

Rob

 

[ROWDY RACING]

Which vvd's did you order?

Long wraiths.

24 pages check "thumbsup"
Lots of Drama check "thumbsup"
Even more useful info on the Bully2's priceless!"thumbsup""thumbsup"

Keep up the great work.

Rob

:ror: Thanks.

 

[TEDROCKZ]

BANG! trigger pulled, thanks Tedrockz. "thumbsup"

#guineapig™

 

[ROWDY RACING]

#guineapig™

#iprefergerbils™

 

[Calderwood]

Any news before I pull the trigger on alternative options?

This is where I'm at. But it looks like you have already gone the vvd route. When you decide you want more steering we can get you switched over to these.

 

[TEDROCKZ]

But it looks like you have already gone the vvd route.

This is just a right now get it done fix. Still very much interested in better solutions"thumbsup"

 

[ROWDY RACING]

This is where I'm at. But it looks like you have already gone the vvd route. When you decide you want more steering we can get you switched over to these.

I will still be here when your stuffs ready, keep me posted. Like TEDROCKZ said I needed a right now fix. "thumbsup"

 

[ROWDY RACING]

This just in...

 

[TEDROCKZ]

Build-a-bear kit? :ror:



That was the last long sides they had on hand.

 

[TURBOFEST]

SWEET!! Get to work!!

That was the last long sides they had on hand.

Sure was

 

[ROWDY RACING]

Build-a-bear kit? :ror:



That was the last long sides they had on hand.

Cut a shaft kit, Bobbit style. :shock:

SWEET!! Get to work!!



Sure was

I'm sure they are making more.

 

[ROWDY RACING]

Got the short side done.

 

[TEDROCKZ]

Bobbit style!

? You gonna run down the street with it in your hand? :lmao:


Work looks good"thumbsup"

 

[ROWDY RACING]

? You gonna run down the street with it in your hand? :lmao:


Work looks good"thumbsup"

:ror:

Thanks, it's ok for a hand job. :mrgreen: