Servo Horn

[stomper4x4.com]

I am so frustrated with breaking the stock servo horns for the MCRC. The spline on the stock servo is some odd ball size. Does anybody know of a place to get aluminum servo horns or a design that won't break? I can't afford to get all new Hi-Tech servos at this time. Thank you.

 

[8695Beaters]

I've been using an E-Flite S75. It's $14 and even with MiClaws I haven't broken it yet. Much better than the Losi servo and cheaper. The horn is also a lot stronger.

 

[chevy55]

Rework the stock horn with some aluminum "thumbsup"
Its damn near bulletproof now!

 

[8695Beaters]

Actually if you're good with epoxy, you can just coat the thing with some 5-minute epoxy (wait until it starts to tack up) and you could do a pretty good bandaid fix. Then when you have the money for the HiTecs or the Turnigys, you can swap over.

 

[andrewt1]

Beaters is dead on, Iv had good results w/epoxy & ca?