• Welcome to RCCrawler Forums.

    It looks like you're enjoying RCCrawler's Forums but haven't created an account yet. Why not take a minute to register for your own free account now? As a member you get free access to all of our forums and posts plus the ability to post your own messages, communicate directly with other members, and much more. Register now!

    Already a member? Login at the top of this page to stop seeing this message.

The unofficial official axial portal buggy.

I too have RPP tracking. I’m on east coast so fedex says 10-4. Hopefully it’ll be a little sooner but I have a date!!

So where are the builds gonna be posted in the mean time? We don’t seem to have an official forum section for them do we?
 
hibbs said:
I too have RPP tracking. I’m on east coast so fedex says 10-4. Hopefully it’ll be a little sooner but I have a date!!

So where are the builds gonna be posted in the mean time? We don’t seem to have an official forum section for them do we?
Click to expand...

Same thing mine says, usually I have parts in about 3 days from RPP to SC. So I’m hoping It’ll be here quicker than it’s showing.
 
Can someone answer my question back a few posts?
My LHS has one on hold a couple miles away and theyre open for another hour.
Thx in advance.

Sent from my SM-G965U1 using Tapatalk
 
I'm thinking the Capra, set up right, will fall somewhere between the capabilities of a scaler and a comp rig, hopefully closer to a comp rigs performance...?

Sent from my SM-G965U1 using Tapatalk
 
J.DUKE said:
With dig, portals, front OD gears, some wheel weight up front, etc, how close can the Capra come to crawling as well as a comp 2.2 MOA?

Is there still a huge spread performance wise from shafty to MOA, or is the gap tightening?

Sorry if its a dumb question, the 4-5 rigs Ive owned have always been pretty basic shafty's, and always Axial.

Ive never had an MOA, Dig, portals, or OD/UD gears in any of my rigs.

Maybe I'm not asking the right question.

Just wondering if I'm going to be blown away before I drop the coin?

Sent from my SM-G965U1 using Tapatalk
Click to expand...


There's no way it would touch a well built MOA. But, unless you're trying to compete at a world level, it looks like the Capra will be more than capable enough. I would guess with some basic tuning the Capra will drive circles around pretty much any shafty rig available now.

Edit, fixed my typo. Don't build and type
 
Last edited:
J.DUKE said:
With dig, portals, front OD gears, some wheel weight up front, etc, how close can the Capra come to crawling as well as a comp 2.2 MOA?

Is there still a huge spread performance wise from shafty to MOA, or is the gap tightening?

Sorry if its a dumb question, the 4-5 rigs Ive owned have always been pretty basic shafty's, and always Axial.

Ive never had an MOA, Dig, portals, or OD/UD gears in any of my rigs.

Maybe I'm not asking the right question.

Just wondering if I'm going to be blown away before I drop the coin?
Click to expand...



It won't come close to a MOA but it should kill any other scaler that comes from a box currently on the market. All the top comp guys I know tend to agree that if shafty had an electronic dig/burn like a MOA they would dominate. We don't have that technology as of yet though.

My capra will be here Monday so I'll know how it does soon enough. I already have parts sitting here to make it better than most out there.
 
Robbob said:
Would you happen to know a hex to hex measurement on these axles? Something tells me these axles are the new gold for a lot of people. :mrgreen:
Click to expand...

Mebbe... I hope it is stiffer than the ssd rear portal I put together last night.


Almighty Malach said:
XR width. Not sure if its exact or just close. Yeah, I see some fun new comp parts coming soon, especially with a factory dig.
Click to expand...

Don't forget about that no talent ass clown in the PNW when it comes time to work that over. I'll figure out if parts swap over between VP portals and these. If so there is already a machine shop working on a set of brass portal covers for me. :ror:
 
Last edited:
Still no Capra section...

Mine says delivery today, but tracking hasn’t moved since 7:30AM so my hopes aren’t high right now.
 
Z06 Tony said:
Found a build review vid that was just posted this morning:
Click to expand...


I'm pretty sure he was the guy on Facebook that said the top of the portal doesn't get a bearing when the instructions clearly show that it does. LOL
 
For those wondering what paint was used in the red Capra build it was Tamiya spray paint
Ps5 and ps2 for polycarbonate
 
WHITE-TRASH said:
That guy doesn't come across as being overly knowledgeable. He's like a slightly less annoying medic.
Click to expand...

Are you talking about Ottman?

And on another note, I would like to see Del Monte take a Capra to a qualifier and see how well he does in pro class. My bet is he at least beats White Trash.
 
TSK said:
Are you talking about Ottman?

And on another note, I would like to see Del Monte take a Capra to a qualifier and see how well he does in pro class. My bet is he at least beats White Trash.
Click to expand...



:lol: sporty maybe, but not in pro.

Medic is rcsparks old screen name. He used to be a club dj that went by dj medic.
 
You must log in or register to reply here.

Similar threads

HumboldtEF
HumboldtEF's 4WS Portal H10 Optic
Replies
0
Views
282
HumboldtEF
HumboldtEF
C
Hobbywing Fusion SE/TRX4 portal delete
Replies
3
Views
414
JatoTheRipper
JatoTheRipper
A
Basecamp options to swap to portals?
Replies
3
Views
643
PileDriver
P
C
NMRCC 1.9 Trail Class Build
2
Replies
21
Views
914
Chingon
C
V
LJD RC's UTB18 2WS
Replies
2
Views
368
VoltSCX
V
Back
Top