Worminator Crawler Comp Axle is shipping

[2500hdon37s]

if i get these they would replace my losi axles!

 

[65volkswagen]

Where are the new pictures. Your killin me smalls !!!!!!

 

[wrat]

how would these axles go with say a r2hd or a r2d???

 

[Mike Poulson]

Any idea when they will be in stock?


Mike

 

[2500hdon37s]

we want pics!

 

[ROLANDROCKSHOP]

nice!
will be keepin tabs on these.

 

[Culetto]

Whats the weight on each axle (front and rear)?

 

[Robotboy]

Link Mounts?

 

[irok]

so many questions,i also wanna see the final completed brks.
when they are in stock someone will post...and by then they will be outa stock
i'm worried about parts,if i bust a steering arm or bend a rear axle i'll be waiting for months for replacements,i hope these become readily available without seeing OUT OF STOCK everytime i click on a cool part.

 

[roborg5000]

Rear axle weight : 7oz

Front axle weight : 8.3oz


Link mounts will be coming very soon "thumbsup"

 

[arevir]

so what would I need to have a rolling crawler with these I mean what transmission are the r2 series the one to use or the axial?
drive shaft?
would it have a similar AX10 wheel speed?
Also I plan to use the corefire 1000kv motor.
thanks.

 

[701 Technique]

Any plans for a ARTR with these axles? :wink::wink:

 

[newtoy]

how is the wheel speed on these?

 

[ManxCrawler]

Is the Bully going to be available with the Worminator as an option in kit form ~ Bully Worminator

Kev

 

[rc4wd]

Worminator Kit will be out within 1-2 weeks, more info on that soon.

 

[ManxCrawler]

After looking at this pic:

I realised that if this was a compound angle ~ ground clearance plus rear pointing, you could run BTA and you'd gain an extra 10° turning angle on the inside wheel without binding or huge strain on the pins

Kev

 

[69CrazyHorse]

Has anyone built a rig using these? I would like to know how it crawls, what parts were used in the build, and if they have experienced any breakage.

 

[irok]

wow man ,i can't understand why this thread is so buried?
has anybody got these under a rig yet?

i guess the upper link mount has to be incorporated into the servo plate,which won't look to scale on the rear

 

[53 willys]

wow man ,i can't understand why this thread is so buried?
has anybody got these under a rig yet?

i guess the upper link mount has to be incorporated into the servo plate,which won't look to scale on the rear

here is a build up...
http://www.rccrawler.com/forum/showthread.php?t=196665

 

[Racer4Life]

2.5 inches of ground clearance under the center of the axle. This is with the Rocklin 2.2 tires.