Project Wilson... 94 Cummins

[1tonblazer]

This is truck my son and are building currently... It's a 94 12v Cummins, I bought it last year and have been tinkering on ever since. It runs great as it's a Cummins but also has bigger nozzles and a turned up P-Pump. It's just broken in at 215K miles has an nv4500 in it, but I bought a rebuilt nv5600 and all the conversion parts, Southbend clutch kit, shift tower and stick. It's at the paint shop now getting finished up body wise, I bought brand new fenders, doors, fiberglass functional ram air hood by amerihood, Bushwacker flares, new 2002 sport grille, new 2014 front bumper, smoked halo headlights and driving lights, smoked led tail lights... used 2002 bed and tailgate.... and so on. The cab corners and rockers have been replaced as well as all the windows and moldings and what not. Still need to swap the 6 spd in, have the drivelines rebuilt, install the new afe intake kit and replace the exhaust from the turbo back. This we need to have done before the 28th of this month so we can take it to the Moab car show the end on the month. After that we'll redo the interior and have the seats upholstered with Catskin leather and replace the carpet and headliner... After that a 6" Revtec Lift and set of 37"... then maybe It will be done lol.

The previous owner had owned it since 1996 and his last name is Wilson... hence the truck's name

[1tonblazer]

The colors are both GM, the dark grey is called Iridium Metallic and the red is Crystal Claret.... no chrome, both bumpers are painted red and the grille is grey.

[1tonblazer]

Another new pic

[1tonblazer]

Flares on...

[calcagno45]

Awesome job! I'd like to get an extend card of that same truck.

[1tonblazer]

I have an 01 24v with 371k on it that I've had since 03... Can't part with it, I'd sell my kids before this truck lol.

[1tonblazer]

Got the exhaust on, along with the new AFE cold air intake. Also got the smoked fog lights in and replaced those chrome taillights and 3rd brake light with smoked units too (not in pics yet). We also had to replace the fuel shutoff solenoid so it will start properly now. Got a new set of drivelines made up and swapping the NV5600 in on Saturday...

[1tonblazer]

Few more pics...

[1tonblazer]

Got the 6 speed NV5600 swapped in yesterday, made a whole new truck out of it... Finally got some pics in the daylight too...

[1tonblazer]

Got a new set of 20X10 XD Buck25s on it today mounted to a used set of 305/55R20 Goodyear Duratracs for now...

[calcagno45]

Super clean build! Great job!

[1tonblazer]

Finally got the windows tinted! That was needed badly lol.

[1tonblazer]

My son and I did more work on ol’ Wilson. We put a basic leveling kit on the front, new shocks, and longer control arms so we could make the new 35” Bfgs clear without any rubbing on the fenders. We also had the interior completey redone, with black and grey leather, new carpet and headliner as well as new sound system and back up camera.

[distinctive pd]

Nice work looking good

[Mike Flea]

Nice paint, that truck turned out sweet