RCCrawler Forums

inkpen00 · 10-19-2011, 09:07 PM

Quote:

Originally Posted by krawlfreak

been working on this thing again quite a bit.

dumped the god awful yeller and went to something a little more pleasing to the eye.

after killing 5-6 titan motors i was looking for something new. i stumbled on to this pro 4.....and it is the shizz!

full rewire and changed to the 3300kv pro 4 on 3s with a mamba max pro.

this thing is fast and crawls amazingly well.

finally got some inner fender wells done.

while i was at it i upgraded all the leds to some units that can run directly off 3-4 cell with no problem.

i also made a light bar for the rig. 1/4"x1/4" delrin housing and again can handle 4 cell direct! it is freakin bright!

made it contour to the windshield as well just to look cool

Where did you find the light strip? I cant wait to see how it lights up at night!! can you give me some more info on that thing?

wally101 · 10-20-2011, 09:33 AM

Nice Tundy! Love what ya did with it. Pro 4 huh? Holy torque!!!!

bmuzz1 · 10-20-2011, 10:05 AM

Wow...I've been away too long.

Great build Jeremy and nice to see you make your way into the scale scene.

TURBOFEST · 10-20-2011, 10:52 AM

Yeah, we're gonna need some more info into that light bar Jeremy. That is pretty damn cool!

krawlfreak · 10-20-2011, 11:06 AM

Quote:

Originally Posted by bmuzz1

Wow...I've been away too long.

Great build Jeremy and nice to see you make your way into the scale scene.

thanks

Quote:

Originally Posted by TURBOFEST

Yeah, we're gonna need some more info into that light bar Jeremy. That is pretty damn cool!

they will be available soon. i have a few different sizes and styles...here are a few.

this is the 3 led bar that is 2.9" long on 4 cell in the fully lit office.

4xFord · 10-20-2011, 11:14 AM

Those have to be the brightest thinnest lightbars ive ever seen! Very cool and Lo profile!

TURBOFEST · 10-20-2011, 12:35 PM

Thats Sick!

krawlfreak · 10-20-2011, 06:07 PM

i will put a little video together tonight with the lights in full force.

this motor is amazing!! fast as all and soooo much torque. i really cant believe how well it crawls..

Hotwheels69 · 10-21-2011, 07:46 PM

I need a light bar

krawlfreak · 10-24-2011, 05:33 PM

little vid....
make sure to turn on the HD

4xFord · 10-24-2011, 06:10 PM

That was the best scale video I've ever seen. The whole second half was so sick.

scalerfreak · 10-24-2011, 06:20 PM

amazing build, make me want to order a tundra body for my build lol

JeremyH · 10-24-2011, 06:36 PM

Cool vid! I dig the jumps at the end!

MTHead · 10-24-2011, 07:13 PM

NICE!!!!

ittybitty · 10-24-2011, 07:22 PM

Very nice rig Jeremy!

krawlfreak · 10-24-2011, 10:17 PM

Quote:

Originally Posted by 4xFord

That was the best scale video I've ever seen. The whole second half was so sick.

Quote:

Originally Posted by JeremyH

Cool vid! I dig the jumps at the end!

Quote:

Originally Posted by MTHead

NICE!!!!

Quote:

Originally Posted by ittybitty

Very nice rig Jeremy!

Thx guys....glad you liked it.

I am having fun with the videos, I am already working on round two!

Gonna try some new vehicle mounting ideas.

Bulldog · 10-24-2011, 10:19 PM

Loved it!!! The motor setup looks spot on, A nice combination of slow and fast. The slow motion closeups were awesome. By the way, a really cool point of view for onboard video is to mount the camera just off the rear wheel down low. That way, you get to see the terrain, the body, and the wheel travel completely. It's tricky to set up though. Make more!

I'm subscribed!

EvilTwin v2 · 10-25-2011, 05:37 AM

Nice video.

That's one of the cooler looking Tundras I've seen.

krawlfreak · 11-01-2011, 03:10 PM

i always liked the omf beadlocks so i cut these. inner and outers...just waiting on some more hardware.

Bulldog · 11-01-2011, 10:19 PM

the rings look killer! Are you going to put in some dummy screws? What did you use to cut them? CNC I would imagine?

10-24-2011, 10:19 PM	#57
Bulldog I wanna be Dave Join Date: Dec 2009 Location: Outside DC Posts: 2,997	Loved it!!! The motor setup looks spot on, A nice combination of slow and fast. The slow motion closeups were awesome. By the way, a really cool point of view for onboard video is to mount the camera just off the rear wheel down low. That way, you get to see the terrain, the body, and the wheel travel completely. It's tricky to set up though. Make more! I'm subscribed! Last edited by Bulldog; 10-24-2011 at 10:26 PM.

10-20-2011, 09:33 AM	#42
wally101 Quarry Creeper Join Date: Dec 2008 Location: La Costa, CA Posts: 375	Nice Tundy! Love what ya did with it. Pro 4 huh? Holy torque!!!!

10-20-2011, 10:05 AM	#43
bmuzz1 I wanna be Dave Join Date: Sep 2007 Location: San Tan Valley Posts: 4,267	Wow...I've been away too long. Great build Jeremy and nice to see you make your way into the scale scene.

10-20-2011, 10:52 AM	#44
TURBOFEST I wanna be Dave Join Date: Aug 2007 Location: JERSEY BOONDOCKS Posts: 3,360	Yeah, we're gonna need some more info into that light bar Jeremy. That is pretty damn cool!

10-20-2011, 11:14 AM	#46
4xFord I wanna be Dave Join Date: Oct 2007 Location: Houston Posts: 3,761	Those have to be the brightest thinnest lightbars ive ever seen! Very cool and Lo profile!

10-20-2011, 12:35 PM	#47
TURBOFEST I wanna be Dave Join Date: Aug 2007 Location: JERSEY BOONDOCKS Posts: 3,360	Thats Sick!

10-20-2011, 06:07 PM	#48
krawlfreak I wanna be Dave Join Date: Aug 2008 Location: Having fun again... Posts: 2,641	i will put a little video together tonight with the lights in full force. this motor is amazing!! fast as all and soooo much torque. i really cant believe how well it crawls..

10-21-2011, 07:46 PM	#49
Hotwheels69 Pebble Pounder Join Date: Aug 2006 Location: In Da ville Posts: 190	I need a light bar

10-24-2011, 05:33 PM	#50
krawlfreak I wanna be Dave Join Date: Aug 2008 Location: Having fun again... Posts: 2,641	little vid.... make sure to turn on the HD

10-24-2011, 06:10 PM	#51
4xFord I wanna be Dave Join Date: Oct 2007 Location: Houston Posts: 3,761	That was the best scale video I've ever seen. The whole second half was so sick.

10-24-2011, 06:20 PM	#52
scalerfreak Quarry Creeper Join Date: Aug 2007 Location: Temple Posts: 326	amazing build, make me want to order a tundra body for my build lol

Sponsored Links

10-24-2011, 06:36 PM	#53
JeremyH I wanna be Dave Join Date: Sep 2005 Location: Houston, TX Posts: 16,952	Cool vid! I dig the jumps at the end!

10-24-2011, 07:13 PM	#54
MTHead DOOH!!! Join Date: Feb 2007 Location: AZ Posts: 2,105	NICE!!!!

10-24-2011, 07:22 PM	#55
ittybitty I wanna be Dave Join Date: Oct 2008 Location: Sumter Posts: 6,141	Very nice rig Jeremy!

10-25-2011, 05:37 AM	#58
EvilTwin v2 I wanna be Dave Join Date: Oct 2005 Location: EvilCrawlerDesigns@comcast.net Posts: 3,510	Nice video. That's one of the cooler looking Tundras I've seen.

11-01-2011, 03:10 PM	#59
krawlfreak I wanna be Dave Join Date: Aug 2008 Location: Having fun again... Posts: 2,641	i always liked the omf beadlocks so i cut these. inner and outers...just waiting on some more hardware.

11-01-2011, 10:19 PM	#60
Bulldog I wanna be Dave Join Date: Dec 2009 Location: Outside DC Posts: 2,997	the rings look killer! Are you going to put in some dummy screws? What did you use to cut them? CNC I would imagine?

RCCrawler Forums

Thread: krawls tundy