|
![]() |
| LinkBack | Thread Tools | Display Modes |
![]() | #1 |
Pebble Pounder Join Date: Apr 2011 Location: Port Orchard, WA
Posts: 194
| ![]()
Here's the start of my new project "OTTER". I've got my work cut out for me with what I plan to do with it. I'm hoping it will be a more competitive truck than Black and Yellow was. But I'm still planning on detailing the crap out of this one too. ![]() ![]() ![]() ![]() |
![]() | ![]() |
Sponsored Links | |
![]() | #2 |
Pebble Pounder Join Date: Apr 2011 Location: Port Orchard, WA
Posts: 194
| ![]()
Got a little work done on Otter today. I removed the coilovers and like the feel of the leafs with the oil dampening. It seems just about right. I am able to adjust the piggy backs for a softer or harder ride. I'll do that in the trial run stages later on. The last pic is of hoops I am playing around with. I haven't decided which look I like better, but am leaning towards the round vs. square. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() | ![]() |
![]() | #3 |
I wanna be Dave ![]() Join Date: Dec 2009 Location: Outside DC
Posts: 2,997
| ![]()
For this being a scale build, I'd say those shocks are WAY off. My two cents. I know they're sexy, but I just don't see them on this rig. It's a shame gmade doesn't make a super scale version. ![]() |
![]() | ![]() |
![]() | #4 | |
Pebble Pounder Join Date: Apr 2011 Location: Port Orchard, WA
Posts: 194
| ![]() Quote:
![]() | |
![]() | ![]() |
![]() | #5 |
Pebble Pounder Join Date: Apr 2011 Location: Port Orchard, WA
Posts: 194
| ![]()
I ordered a bunch of RC4WD goodies today. One of which are the ultimate scale shocks. I know they dont use oil, but they look awesome and should foot the bill nicely. I'll post some pictures of the other stuff once they all get here. ![]() |
![]() | ![]() |
![]() | #6 |
Pebble Pounder Join Date: Apr 2011 Location: Port Orchard, WA
Posts: 194
| ![]()
Got my new shocks and drive lines today. I put the rear shocks on and the d-lines. I really like the look of these shocks, but sure wish they had oil dampening. Next is to install the fronts. Need to make new hoops to accommodate two per side. ![]() ![]() ![]() ![]() ![]() ![]() |
![]() | ![]() |
![]() | #7 |
Fan of wheelspeed Join Date: Jun 2011 Location: Southern IN
Posts: 3,369
| ![]()
looking good man. I like those shocks way better.
|
![]() | ![]() |
![]() | #8 |
Rock Stacker Join Date: Dec 2011 Location: New Summerfield, Tx.( in the backwoods)
Posts: 91
| ![]()
Awesome so far, gonna be killer when it's done...."THUMBSUP"
|
![]() | ![]() |
![]() | #9 |
Rock Stacker Join Date: Feb 2012 Location: Elmo AFB
Posts: 55
| ![]()
Looking good man! How do you like that transfer case? Also, how do you like the double shock set up?
|
![]() | ![]() |
![]() | #10 | ||
Pebble Pounder Join Date: Apr 2011 Location: Port Orchard, WA
Posts: 194
| ![]() Thanks. Me too. ![]() Quote:
![]() Quote:
![]() | ||
![]() | ![]() |
![]() | #11 |
Pebble Pounder Join Date: Apr 2011 Location: Port Orchard, WA
Posts: 194
| ![]()
It took me six hours, but I got the hoops done today. Phew, that was a pain in the ass! ![]() ![]() ![]() ![]() |
![]() | ![]() |
![]() | #12 |
Pebble Pounder Join Date: Apr 2011 Location: Port Orchard, WA
Posts: 194
| ![]()
The trany is in it new home. I had to modify a new JunFac drive line to couple the trany and t-case. Worked out beautifully. Next is the steering servo. ![]() ![]() ![]() |
![]() | ![]() |
![]() | #13 |
Pebble Pounder Join Date: Oct 2012 Location: Buffalo
Posts: 141
| ![]()
Cool build, how did you like those piggy back shocks? Did they hold weight well or are they still just for crawling? I was looking at that specific line for my tow rig but didn't want to pull the trigger on the price if they weren't going to hold the trailer weight
|
![]() | ![]() |
![]() | #14 | |
Pebble Pounder Join Date: Apr 2011 Location: Port Orchard, WA
Posts: 194
| ![]() Quote:
![]() | |
![]() | ![]() |
![]() | #15 |
Pebble Pounder Join Date: Oct 2012 Location: Buffalo
Posts: 141
| ![]()
ooh leaking is no good, especially for a shelf queen like my rig will turn into haha.
|
![]() | ![]() |
![]() | #16 |
Pebble Pounder Join Date: Apr 2011 Location: Port Orchard, WA
Posts: 194
| ![]()
Put some fresh paint on the grill and different tires on the rims. ![]() |
![]() | ![]() |
![]() | #17 |
Pebble Pounder Join Date: Apr 2011 Location: Port Orchard, WA
Posts: 194
| ![]()
Yep. The OG chassis and hard body are being used. And in no way do I plan on keeping her on the shelf. I will run her as a fully capable rig. ![]() ![]() |
![]() | ![]() |
![]() | #18 |
Pebble Pounder Join Date: Apr 2011 Location: Port Orchard, WA
Posts: 194
| ![]()
I've made a little more progress on Otter. Just trying to get thru my least favorite part of building these things...the painting. Only a little more to go and I'm done... ![]() ![]() ![]() |
![]() | ![]() |
![]() | #19 |
Newbie Join Date: Oct 2012 Location: Byron Center
Posts: 20
| ![]()
This is looking really great. Love the yellow!
|
![]() | ![]() |
![]() | #20 |
Rock Stacker Join Date: Sep 2011 Location: longview, WA
Posts: 77
| ![]()
Cha-ching!!! $$$$ ![]() |
![]() | ![]() |
![]() |
![]() | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Project "Clampy" 1.9" Scale Yota Build | 51WillysJeep | 1.9 Scale Rigs | 717 | 08-09-2019 05:58 AM |
AREA 51RC "Project Chaotic "Switch" XR10" | D19er | Axial XR10 | 105 | 03-10-2014 05:30 PM |
Project "FRANKESTAIN" or "AXIAL FORCE" | mykonian | General Crawlers | 5 | 03-06-2009 11:37 AM |
Project "TimberWolf" 1.9" Scale Yota Hybrid | 51WillysJeep | 1.9 Scale Rigs | 53 | 08-14-2008 06:43 PM |
| |