RCCrawler Forums

Rockcrawler · 01-23-2008, 10:23 PM

Well, I guess I wont come crawl this weekend at your house since you will be busy.

slowdown · 01-23-2008, 11:38 PM

sweet chassis cant wait to see it finnished

lunchbox · 01-24-2008, 09:25 AM

Quote:

Originally Posted by Rockcrawler

Thats a DX3.0 not a DX3.

Of course, how silly of me. :grin:

RXcrawler · 01-24-2008, 11:06 AM

Quote:

Originally Posted by Rockcrawler

Well, I guess I wont come crawl this weekend at your house since you will be busy.

Sure you can Brian is bring his crawler and we are going to crawl then put in my clutch and new trans then crawl some more. Bring it!

Rockcrawler · 01-24-2008, 06:38 PM

Quote:

Originally Posted by RXcrawler

Sure you can Brian is bring his crawler and we are going to crawl then put in my clutch and new trans then crawl some more. Bring it!

I am riding with Brian.

jeepcj578 · 01-24-2008, 08:17 PM

Quote:

Originally Posted by Rockcrawler

The worst part is that this is all he has to do all day and he still isnt done.

i was thinking the same thing

if i only had more time in a day

RXcrawler · 01-25-2008, 08:51 PM

Another roller. Tomorrow is build day, they will be done then except for radio and battery. Might even have time to build mine in the back ground!

RXcrawler · 01-26-2008, 04:01 PM

In normal Joey fashion I didn't get that much done today. But I did figure out the dig linkage!!! Used some TLT parts and I like the way it turned out using the TCS R2D servo plate. I ordered the new TCS skid plate that is drilled for the R2D so when I get it and mount the ESC it will basically be done.

Trimmy · 01-27-2008, 12:32 AM

looks good!!!

509 Media · 01-28-2008, 08:51 AM

I wanted to get by there yesterday. Too much going on before I had to bounce outa town. Let me know if you need anything else. Looking good man. Its is going to look PIMP when I wrap it. haha

-Dan

509 Media · 01-30-2008, 02:52 PM

this sucks... I want to see some new pics. Come On.

-Dan

Rockcrawler · 01-30-2008, 06:30 PM

Hey Dan, I will vouch for him.......he is on dial-up.

lunchbox · 01-30-2008, 07:29 PM

Dial up? What's that?

RXcrawler · 01-30-2008, 10:36 PM

something like trying to listen to a song by morris code

rckjeep · 01-30-2008, 11:24 PM

Id cut off the sheet metal plates and move them up about 3/4"or so. I saw one of the Edge
AX10's at our last comp and it needs to get shorter in the height department. It'll make the CG lower and make it more stable. It was getting hung up from poor breakover do to the tall side panels. Just a suggestion. Enjoy Dan nice to see you back in the scale world. I still hope to convince my wife to move out that way so I can work there. But at this point it maybe easier for you to move BTF.

CSR · 01-31-2008, 07:15 AM

Quote:

Originally Posted by JRose

Joey,

So this is where you've been hiding out!!! Looks like a cool rig, I have to get you to build me one some day, I had a blast that time at your house!

Jason

Is that Jason Rose?? What's happening brother?

I was cleaning out my wallet other day and found a piece of paper with your number on it.... that reminded me.... did you get that piece of steel for your Toyota driveshaft that I was supposed to send you about 4 years ago?

RXcrawler · 01-31-2008, 10:06 AM

Quote:

Originally Posted by CSR

Is that Jason Rose?? What's happening brother?

I was cleaning out my wallet other day and found a piece of paper with your number on it.... that reminded me.... did you get that piece of steel for your Toyota driveshaft that I was supposed to send you about 4 years ago?

He don't even have the yota anymore.

CSR · 01-31-2008, 11:38 AM

You're getting all the ol' Alabama guys that used to 1:1 wheel into r/c crawling, Joey! We need to build crawlers for Bishop, Hal, and Mike Dugan too! We could meet at Tellico just like the old days, only with r/c trucks instead of full-size!

509 Media · 01-31-2008, 05:31 PM

Quote:

Originally Posted by rckjeep

Id cut off the sheet metal plates and move them up about 3/4"or so. I saw one of the Edge
AX10's at our last comp and it needs to get shorter in the height department. It'll make the CG lower and make it more stable. It was getting hung up from poor breakover do to the tall side panels. Just a suggestion. Enjoy Dan nice to see you back in the scale world. I still hope to convince my wife to move out that way so I can work there. But at this point it maybe easier for you to move BTF.

yeah moving the shop that far would suck. LOL I am looking forward to gettting settled in Bham so I can rip it up with the new crawler.

509 Media · 01-31-2008, 05:32 PM

Quote:

Originally Posted by Rockcrawler

Hey Dan, I will vouch for him.......he is on dial-up.

yeah I am just giving him a hard time. :-P

01-25-2008, 08:51 PM	#47
RXcrawler Moderator Join Date: Apr 2004 Location: In my head Posts: 2,744	Another roller. Tomorrow is build day, they will be done then except for radio and battery. Might even have time to build mine in the back ground! Attached Images

01-26-2008, 04:01 PM	#48
RXcrawler Moderator Join Date: Apr 2004 Location: In my head Posts: 2,744	In normal Joey fashion I didn't get that much done today. But I did figure out the dig linkage!!! Used some TLT parts and I like the way it turned out using the TCS R2D servo plate. I ordered the new TCS skid plate that is drilled for the R2D so when I get it and mount the ESC it will basically be done. Attached Images

01-30-2008, 11:24 PM	#55
rckjeep I wanna be Dave Join Date: Jun 2004 Location: San Jose Posts: 5,207	Id cut off the sheet metal plates and move them up about 3/4"or so. I saw one of the Edge AX10's at our last comp and it needs to get shorter in the height department. It'll make the CG lower and make it more stable. It was getting hung up from poor breakover do to the tall side panels. Just a suggestion. Enjoy Dan nice to see you back in the scale world. I still hope to convince my wife to move out that way so I can work there. But at this point it maybe easier for you to move BTF. Last edited by rckjeep; 01-30-2008 at 11:27 PM.

01-23-2008, 10:23 PM	#41
Rockcrawler I wanna be Dave Join Date: Jan 2005 Location: Hueytown, Alabama Posts: 6,777	Well, I guess I wont come crawl this weekend at your house since you will be busy.

01-23-2008, 11:38 PM	#42
slowdown Newbie Join Date: Aug 2007 Location: Lakewood Posts: 44	sweet chassis cant wait to see it finnished

01-27-2008, 12:32 AM	#49
Trimmy Rock Crawler Join Date: Nov 2007 Location: Dayton, Ohio Posts: 506	looks good!!!

01-28-2008, 08:51 AM	#50
509 Media Quarry Creeper Join Date: Jul 2005 Location: Dothan, AL Posts: 251	I wanted to get by there yesterday. Too much going on before I had to bounce outa town. Let me know if you need anything else. Looking good man. Its is going to look PIMP when I wrap it. haha -Dan

01-30-2008, 02:52 PM	#51
509 Media Quarry Creeper Join Date: Jul 2005 Location: Dothan, AL Posts: 251	this sucks... I want to see some new pics. Come On. -Dan

01-30-2008, 06:30 PM	#52
Rockcrawler I wanna be Dave Join Date: Jan 2005 Location: Hueytown, Alabama Posts: 6,777	Hey Dan, I will vouch for him.......he is on dial-up.

01-30-2008, 07:29 PM	#53
lunchbox Quarry Creeper Join Date: Feb 2007 Location: Fresno Posts: 472	Dial up? What's that?

01-30-2008, 10:36 PM	#54
RXcrawler Moderator Join Date: Apr 2004 Location: In my head Posts: 2,744	something like trying to listen to a song by morris code

01-31-2008, 11:38 AM	#58
CSR RCC Addict Join Date: Jun 2004 Location: SERCRC Posts: 1,680	You're getting all the ol' Alabama guys that used to 1:1 wheel into r/c crawling, Joey! We need to build crawlers for Bishop, Hal, and Mike Dugan too! We could meet at Tellico just like the old days, only with r/c trucks instead of full-size!

Sponsored Links

RCCrawler Forums

Thread: Official BlueTorch "Edge" coming soon!!!