Bc and kam2040 build a Villian

[Bc Paints]

Originally Posted by newbe5.9

nice stuff

Thanks KC
Almost a roller, should have it up and running tomorrow evening

[Almighty Malach]

How close was I on link measurements?

[ROWDY RACING]

Nice shaftsmen.

[Bc Paints]

Originally Posted by Almighty Malach

How close was I on link measurements?

Bang on for the uppers, and the lowers are spot on I think with off the shelf vanquish Ti rods, I'll know for sure once I get shocks built and mounted tomorrow, thanks for the help Casey

[Bc Paints]

Originally Posted by ROWDY RACING

Nice shaftsmen.

Sure is, can't wait to finish and test and tune tomorrow evening

[Bc Paints]

Gunnar body mounts, these are essential for running a body in my opinion, thanks Gunnar

[Bc Paints]

We made roller status last night at our clubs weekly fun crawl


Working on electrics now

[newbe5.9]

looks sick

[rookie101]

Looking good, running yet?

[Bc Paints]

almost, should be done later this evening

[Bc Paints]

Originally Posted by Bc Paints

Bout 3-4mm too long on the uppers, axles are rolled a touch too far, and the lowers are spot on I think with off the shelf vanquish Ti rods, I'll know for sure once I get shocks built and mounted tomorrow, thanks for the help Casey

after mounting shocks it turns out the uppers are bang on at 103mm

[Almighty Malach]

Originally Posted by Bc Paints

after mounting shocks it turns out the uppers are bang on at 103mm

[Bc Paints]

lathed down big bores from dlux, borrowed the reverse rod end mod from 63comet's shafty build
caps modded

and installed

[kam2040]

Couple of running shots.

[Crawllife]

So what are the mini lid rules for shaftsman? I prepped a mini beetle for my ringer and was told for bodied 2.2p I was ok but had to run something 1/10 for sporty. Thanks in advance for any input.

[Bc Paints]

It is too small for shafty at a national level, in our club we run unified specs for bodies across 2.2
So this works till nats

[ROWDY RACING]

Originally Posted by Crawllife

shaftsmen

Fixed it for you.

[Bc Paints]

Kam and myself put about 4 packs through this truck today, no tuning, no knuckle weight, blown away at how well this thing worked, couple of tweaks here and there (springs, shock oil) and a bit of kw and we are good to go, full specs and parts list coming soon, Y-Town = Awesome

[Krawler Kev]

I was fortunate enough to get to try this bad boy it's awesome.

[Crawler Ted]

I also took this bad boy for a little spin around the course ,,
Totally awesome !
Sweet rig guys !