09-17-2015, 02:32 PM | #101 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: Punched Cookie Monster "budget" build
OK. Try super shafty
|
Sponsored Links | |
10-07-2015, 03:15 AM | #102 |
Rock Crawler Join Date: Sep 2009 Location: Bloomsburg, pa
Posts: 583
| Re: ax10/wraith crawlin on a budget "sportsman" build
lots of updates coming up. Mostly cosmetic things, but it should be looking more and more finished. All i will really have left to do is figure out electronics which ive been spinning my wheels on. If anybody feels like giving advice on motor/esc and rx/tx here is what im working with/looking for: Have a 7955tg servo and holmes hobbies rx bypass for a bec Want high turn brushed motor (I like slow technical crawling) and an esc that will allow me to upgrade to brushless at some point. I would like to avoid lipo batteries for now but the option to switch to them eventually would also be nice. tx/rx, i dont need anything super fancy but i would rather pay a little more for something that is made well. Ive always used cheap futaba radios that only had trim settings and nothing else, i would love to change that. price wise I would like to not go much over 200 for each thing. thanks for any help and updates will come soon :-D |
10-07-2015, 03:46 AM | #103 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: Punched Cookie Monster "budget" build
Airtronics mxv is 60 to 100 very nice for the money. Holmes Hobbies 30t or a 16t.
|
10-07-2015, 05:37 PM | #104 | |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: Punched Cookie Monster "budget" build Quote:
Unless you get the MX-V for 60-70$, your best bet for longevity and additional rig types, the MT-4 is the way to go! ;) In the last 5 days, a handful have went for 150$ and down.. TX for 70$ and a rx for 40-50$.. If you buy them separate... Still under 150$.. Always HH! I'm working on numbers Dan.. | |
10-07-2015, 07:48 PM | #105 |
RCC Addict Join Date: Oct 2011 Location: British Columbia
Posts: 1,487
| Re: ax10/wraith crawlin on a budget "sportsman" build
If you can get a MT-4 for ~$150, go for it. It'll serve you well for whatever you decide to drive. LiPo batteries have much better power to weight over a NiMH, plus I'm not sure where you'd mount a stick pack in a SuckerPunch chassis. You should really reconsider and use a LiPo. |
10-07-2015, 08:33 PM | #106 |
Rock Crawler Join Date: Sep 2009 Location: Bloomsburg, pa
Posts: 583
| Re: ax10/wraith crawlin on a budget "sportsman" build
i think im just going to make the jump to lipo, the only reason i would rather not do it is because i have a very limited (and apparently out of date) knowledge of them. The only time i have had interactions with them was years ago when a "budget" lipo set up was around 1200 bucks. Troy has assured me that lots of things have changed since then so maybe it wont be as bad as i see in my head. Seeing a recent thread about somebody having a contained lipo fire in storage doesnt help my feelings at all. |
10-07-2015, 08:49 PM | #107 |
I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
| Re: Punched Cookie Monster "budget" build
1200$!!!!! You could have one heck of a Lipo collection, these days, for that kind of money! Packs we use are 6-8$ a piece.. Chargers can be up to 250$, for top notch, charging and balancing 4 packs at a time.. But I'm sure half a dozen packs and a 50-75$ charger will cover all your needs. So you could drop a zero and get all hooked up into Lipo for 120$! |
10-07-2015, 08:58 PM | #108 | |
RCC Addict Join Date: Oct 2011 Location: British Columbia
Posts: 1,487
| Re: ax10/wraith crawlin on a budget "sportsman" build Quote:
Troy can get you hooked up with a decent LiPo (or two) that'll fit the SuckerPunch. ----> off topic...sorry the Pirates just lost to the Cubbies. | |
10-07-2015, 09:20 PM | #109 |
Rock Crawler Join Date: Sep 2009 Location: Bloomsburg, pa
Posts: 583
| Re: ax10/wraith crawlin on a budget "sportsman" build |
10-08-2015, 04:01 AM | #110 |
Rock Crawler Join Date: Sep 2009 Location: Bloomsburg, pa
Posts: 583
| Re: ax10/wraith crawlin on a budget "sportsman" build
i just jumped off the deep end and bought myself an early christmas present. (thats what im telling my lady anyway) http://www.amazon.com/gp/product/B00...ilpage_o00_s00 ive always heard good things about spektrum and i watched videos and read some things before i pulled the trigger on that radio. I think for the price its one of the best moves i could make considering it has 4 channels (helpful when i build a scaler) and can be bound to other rx's (also helpful when i build a scaler) and on top of that seems to be pretty durable. It wont be available to ship for another 2 days but its not like im going to be able to use it on anything any time soon haha. |
10-08-2015, 12:32 PM | #111 |
RCC Addict Join Date: Oct 2011 Location: British Columbia
Posts: 1,487
| Re: ax10/wraith crawlin on a budget "sportsman" build
That's a good deal. It's less than I paid for my DX3C 5 years ago and if you didn't like it for whatever reason, you should still be able to get $75 for it used.
|
10-08-2015, 10:40 PM | #112 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: Punched Cookie Monster "budget" build
Ok what all do you need to finish this up. I keep looking for the mandatory flex photos (just kidding).
|
10-08-2015, 11:05 PM | #113 | |
Rock Crawler Join Date: Sep 2009 Location: Bloomsburg, pa
Posts: 583
| Re: Punched Cookie Monster "budget" build Quote:
since i ordered a radio i think all i need is a motor and esc im trying to figure out a backdrop so my pictures dont suck so bad, i got all my stuff in the mail so hopefully i will have pictures to post tomorrow. Last edited by onebullet; 10-08-2015 at 11:08 PM. | |
10-09-2015, 05:15 AM | #114 |
Rock Crawler Join Date: Feb 2013 Location: york
Posts: 707
| Re: Punched Cookie Monster "budget" build
white poster board is a great backdrop!
|
10-09-2015, 09:33 AM | #115 |
Rock Crawler Join Date: Sep 2009 Location: Bloomsburg, pa
Posts: 583
| Re: ax10/wraith crawlin on a budget "sportsman" build
Finally something to look at! I am going to try and make some kind of scale garage for photos, i had some foam board laying around from another project so this is the start of it in these pictures. Things that have changed since the last pictures posted are: VP motor plate and spur cover, front drive shaft installed and half of the rear drive shaft installed. I also got bored one day and colored the light edges of the chassis. The motor plate and spur cover are pretty awesome but its SUPER wide, i spaced out the side plate a little to get it installed but im trying to come up with a better solution. I can cut the motorplate and skip the spur cover but i would rather not do that, i love the side profile that it gives the chassis, to me its organic curves that just make it look really tough. Since my first flex picture wasnt good enough, these are for you fish! and some pictures of my new stuff. I also got an exciter body but getting that in the picture was a pain. I might start messing with everything today but probably not until tomorrow, going to try and get some in progress of everything. |
10-09-2015, 09:53 PM | #116 |
I wanna be Dave Join Date: Nov 2014 Location: West Texas
Posts: 2,654
| Re: Punched Cookie Monster "budget" build
Looks very good! I've got you next on the list. I'll get your welder fixed up for you scale garage.
|
10-09-2015, 10:01 PM | #117 |
I wanna be Dave Join Date: Dec 2006 Location: here
Posts: 3,042
| Re: ax10/wraith crawlin on a budget "sportsman" build
Why king shocks? Unless king shocks have been improved imo the stock scx10 plastic shocks with MRC springs would work better. This bridges the gap between a scale & comp rig. (Tires/shocks)
|
10-09-2015, 10:41 PM | #118 |
Rock Crawler Join Date: Sep 2009 Location: Bloomsburg, pa
Posts: 583
| Re: ax10/wraith crawlin on a budget "sportsman" build
I didnt really seek out the king shocks. I just wanted some shocks that were a bit longer because there was no droop left in the scx shocks at all and they almost feel like they are getting ripped apart just sitting there. I did want to get proline power strokes but these ended up being cheaper and i had a coupon code for ckrc. What is bad about the king shocks? They feel and look really well built, if its something do with the dampening or springs both of those can be changed. They seem like any other metal threaded shock to me. More than a few members have mentioned "thats not for a comp rig" on various parts and i really dont get it. Ive posted more than a few times im not going to compete with anything, the parts fit together and work as intended so what is the issue? Last edited by onebullet; 10-09-2015 at 10:44 PM. |
10-09-2015, 11:22 PM | #119 |
Rock Crawler Join Date: Sep 2009 Location: Bloomsburg, pa
Posts: 583
| Re: ax10/wraith crawlin on a budget "sportsman" build
and now that i have filled the king shocks with oil and have tried to compress them.... i see what the issue is...... damnit. BRAND NEW KING SHOCKS FOR SALE! 2 FILLED WITH 30WT AND 2 STILL IN THE PACKAGE! Last edited by onebullet; 10-09-2015 at 11:29 PM. |
10-09-2015, 11:43 PM | #120 |
I wanna be Dave Join Date: Dec 2006 Location: here
Posts: 3,042
| Re: ax10/wraith crawlin on a budget "sportsman" build
Pick up some rcbros or mrc springs for the scx10 shocks. The scx10 shocks will do the job. It's probably the scale style/stock springs that make the scx10 shocks not fell right on your rig. |
ax10/wraith crawlin on a budget "sportsman" build - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Dutch AX10 sporty build | douwe | Axial AX-10 Scorpion | 232 | 11-29-2015 11:27 AM |
which axles for sporty build? ax10 or ar60 | Flyin Hawaiian | Axial AX-10 Scorpion | 7 | 06-20-2015 10:37 PM |
Project Slow and Stead- Wraith build | ezekiel_771 | Axial Wraith | 2 | 06-12-2014 04:50 PM |
| |