|
Let's see those 2.2 Scx10's So i really want to pick up an scx10 as they are a nice looking truck, But i am on the fence as i prefer the look/ground clearance of 2.2's So Show them off! If you can / feel like it please list mod's to get to 2.2 height. I would really like to do a 2.2 scx10 with a panel truck body. So 2.2's unless your running some BIG 1.9's Thanks guys! |
Re: Let's see those 2.2 Scx10's Here is where someone would post the "why don't you try searching" response, but I have to say that I searched earlier for "2.2" in the SCX-10 section and it can up with no matches. Hard to believe, but I tried several times. So, "try searching" would do you no good. However, this has been debated and documented with pictures several times. I'd advise starting in the SCX-10 picture thread. Start at the end and work your way backwards. There are a few SCX-10 rigs with 2.2 wheels/tires. Also, look in the 2.2 picture thread. Try Google; I found some images by searching "2.2 SCX-10" there. I know this has been covered, but I can't direct you because I can't find the threads. *Not sure if this response is 'bill' approved |
Re: Let's see those 2.2 Scx10's Dingo 2.2. The Dingo body is closer to 1/8 scale, IMO, so 2.2's look really nice sans the flairs. http://i39.tinypic.com/fbdlw4.jpg |
Re: Let's see those 2.2 Scx10's 1 Attachment(s) still just a poser waiting on a radio but its cool snows to deep outside gives me more time for mods |
Re: Let's see those 2.2 Scx10's Here is a pic of mine before the tube and body work .http://www.rccrawler.com/forum/membe...1720-18555.jpg |
Re: Let's see those 2.2 Scx10's my scx10 honcho. body is trimmed a lot. http://i978.photobucket.com/albums/a...9/HPIM1455.jpg front shot http://i978.photobucket.com/albums/a...9/HPIM1456.jpg flex shot http://i978.photobucket.com/albums/a...9/HPIM1262.jpg its pretty easy to to run 2.2's just need to be prepared to trim the body or make a small lift to fit them. if you search enough you will find scx10 builds. if its stock honcho's and dingo's with 2.2 then there's a few around, if your talking scx10 chassis based with 2.2's then there's..check out the 2.2 scale rig section. |
Re: Let's see those 2.2 Scx10's - 110mm Hot Racing coilovers - ProLine 2.2 tires - Axial 2.2 black wheels - JunFac carbon steel drive shafts http://inlinethumb13.webshots.com/46...600x600Q85.jpg http://inlinethumb36.webshots.com/48...600x600Q85.jpg http://inlinethumb61.webshots.com/71...600x600Q85.jpg |
Re: Let's see those 2.2 Scx10's mudslingers look good since their not very big. http://i5.photobucket.com/albums/y17...1/DSC02690.jpg |
Re: Let's see those 2.2 Scx10's |
Re: Let's see those 2.2 Scx10's Thanks guy's perfect, Do you find you are breaking more parts? or is it holding up to larger tires fine? thanks! |
Re: Let's see those 2.2 Scx10's 3 Attachment(s) My 2.2...widened, extended and lifted . |
I'll play. My tube bed honcho with the droop setup on 2.2's http://img.tapatalk.com/aefc5c02-9e89-be2d.jpg http://img.tapatalk.com/aefc5c02-9ec1-e18f.jpg http://img.tapatalk.com/aefc5c02-9ee2-65c3.jpg And a little poser flex shot. Hey at least it's rock, not a soda can. LOL http://img.tapatalk.com/aefc5c02-9f51-62b6.jpg |
Re: Let's see those 2.2 Scx10's 2.2 Mud Slingers http://i860.photobucket.com/albums/a...28-2011552.jpg http://i860.photobucket.com/albums/a...28-2011090.jpg 2.2 ProLine Super Swampers with longer wheelbase http://i860.photobucket.com/albums/a...9-24164918.jpg http://i860.photobucket.com/albums/a...9-24165159.jpg 2.2 PitBull Rock Beast, long wheel base, Junfac wideners "thumbsup" http://i860.photobucket.com/albums/a...olar_A02-1.jpg http://i860.photobucket.com/albums/a...23114111-1.jpg http://i860.photobucket.com/albums/a...ug/9_25_09.jpg http://i860.photobucket.com/albums/a...ug/9_25_05.jpg http://i860.photobucket.com/albums/a...ug/9_25_04.jpg |
Re: Let's see those 2.2 Scx10's |
Re: Let's see those 2.2 Scx10's http://www.rccrawler.com/forum/axial...cx-honcho.html I run 2.2's on mine,there's some pics and info on what I have done to the truck to run them in my build thread. |
Re: Let's see those 2.2 Scx10's Quote:
I gotta have them. :shock: |
Re: Let's see those 2.2 Scx10's 1 Attachment(s) Here ya go. |
Re: Let's see those 2.2 Scx10's Quote:
They are rc4wd super narrow beadlocks. they come with red rings, but I painted them black. |
Re: Let's see those 2.2 Scx10's 2.2 flat-irons. Easier fit than most 2.2 since they are on the small side, but you get the extra width. http://i659.photobucket.com/albums/u...r/IMG_0033.jpg http://i659.photobucket.com/albums/u...aler/Hope1.jpg |
Re: Let's see those 2.2 Scx10's 5 Attachment(s) Quote:
|
Re: Let's see those 2.2 Scx10's I like this rig dosent look like 2.2s , made it look more like 37s |
Re: Let's see those 2.2 Scx10's Hawaiian style stretch! Mite look funny to you guys but we stretch our tires down here! http://i607.photobucket.com/albums/t...s/226b3ac0.jpg http://i607.photobucket.com/albums/t...s/0e214397.jpg |
Re: Let's see those 2.2 Scx10's |
Re: Let's see those 2.2 Scx10's |
Re: Let's see those 2.2 Scx10's usually run 1.9's but threw on the 2.2s for snow trailin , 1.9's too skinnny http://i1194.photobucket.com/albums/...nterrubber.jpg http://i1194.photobucket.com/albums/...terrubber2.jpg |
Re: Let's see those 2.2 Scx10's Here is my Honcho with 2.2 Axial Rocksters and 2.2 Pro-line Flat Irons. http://www.rccrawler.com/forum/membe...1625-30837.jpg The front tires rub the bumper and the body behind the tires when turning while flexed. The pictures showing the rubbing can be seen in my album. I think this set-up looks awesome, but I'll stick to 1.9's so I don't have to heavily modify anything. |
Re: Let's see those 2.2 Scx10's Quote:
that is Hawaiian style for sure you guys have a love for wide 18" rims and boggers LOL good looking rig.. what wheels are you using to make them that wide? |
Re: Let's see those 2.2 Scx10's My 2.2 with wraith axles<!-- google_ad_section_end --> <FIELDSET class=fieldset><LEGEND>Attached Images</LEGEND>http://www.rccrawler.com/forum/attac...0823_small.jpg http://www.rccrawler.com/forum/attac...0824_small.jpg http://www.rccrawler.com/forum/attac...0825_small.jpg http://www.rccrawler.com/forum/attac...0826_small.jpg </FIELDSET> |
Re: Let's see those 2.2 Scx10's Thanks man and I really like your f350 truggy. And it's 2.2 axial wheels glued together. But that tundra is getting turned into a truggy now and runny skinny tires. |
Re: Let's see those 2.2 Scx10's first off, I'd read this thread end to end, some of it is repeated, but it's all good info. I'm suprised more people on here haven't done more of these bits... http://www.rccrawler.com/forum/axial...ks-thread.html I need to get some pics up of my sons Honcho, 2.2's, all we had to do for clearance is to trim down the front edge of the side bars, cut off both sides of the front bumper as many people have done, and bought some taller body mounting posts, basically lifted up the shell close to 1 inch... doesn't look ideal, but the price was right and we didn't need to cut the body at all so if he ever wants to go back down to 1.9's he can. we also weighted the wheels pretty good to make up for it being more top heavy. Also, to anyone with a honcho, I'd suggest trimming/flipping the side bars. Free mod, works well. We went with the Venom 2.2 beadlock rims and TSL Super Swampers.... The combo works well and looks pretty good. |
heres some pics of mine wile i still have it. i dont use it much so im letting it go. all of these pics were from the same truck, just at different points http://img.tapatalk.com/4079c665-4110-6959.jpg http://img.tapatalk.com/4079c665-4125-ebc3.jpg flex shot, those are 2.8s http://img.tapatalk.com/4079c665-4135-df88.jpg who says an scx10 cant be a monster truck? http://img.tapatalk.com/4079c665-416f-0b9b.jpg http://img.tapatalk.com/4079c665-41b9-21c6.jpg --- I am here: http://maps.google.com/maps?ll=40.709837,-75.227816 |
Re: Let's see those 2.2 Scx10's I realize this thread has been dead for several months but it is definitely hard to find much on the 2.2 SCXs out there aside from looking through the SCX10 Picture Thread. Here is my SCX10 with the 2.2 Pit Bulls I put on this morning - I'm stoked to see how it performs now! http://www.smugmug.com/photos/i-7BrD...7BrDktq-XL.jpg http://www.smugmug.com/photos/i-5NKN...5NKN4CF-XL.jpg http://www.smugmug.com/photos/i-pkGB...pkGBX2R-XL.jpg http://www.smugmug.com/photos/i-dmbW...dmbW9NH-XL.jpg http://www.smugmug.com/photos/i-qKNc...qKNcjJt-XL.jpg This is all pre-trimming obviously. My 2nd Honcho body arrived today so I will be trimming the hell out of it this weekend and then hopefully hitting the rocks. Finkhttp://cfink.smugmug.com/photos/i-Lg...-LgFpTrs-M.gif |
Re: Let's see those 2.2 Scx10's |
Re: Let's see those 2.2 Scx10's |
2 Attachment(s) 2.2mudslingers [ATTACH]197822[/ATTACHAttachment 197823] Traxxas bigbore shocks from a t-maxx for extra height http://img.tapatalk.com/18de632d-6b70-0f9d.jpg Sent from my highly abused iPhone using Tapatalk |
Re: Let's see those 2.2 Scx10's |
Re: Let's see those 2.2 Scx10's |
Re: Let's see those 2.2 Scx10's Here is my 2.2 scx10 http://i1154.photobucket.com/albums/...8/IMAG0363.jpg |
Re: Let's see those 2.2 Scx10's my honcho and my buddies honcho http://i40.photobucket.com/albums/e2...1/da1a67d0.jpg http://i40.photobucket.com/albums/e2...1/17ba39a6.jpg http://i40.photobucket.com/albums/e2...1/dea48e46.jpg http://i40.photobucket.com/albums/e2...1/96b3fac5.jpg http://i40.photobucket.com/albums/e2...1/fdb048a1.jpg |
| All times are GMT -6. The time now is 08:06 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com