03-03-2013, 03:04 PM | #1 |
Rock Crawler Join Date: May 2012 Location: Columbus
Posts: 676
| problem with new dingo
picked up a new dingo on ebay not opened but heres the problem the trany and axles spin fine with one finger but as soon as i put on the drive-shafts it feels like its binding up a bit and the truck bounces any suggestions??? |
Sponsored Links | |
03-03-2013, 03:12 PM | #2 |
RCC Addict Join Date: Feb 2010 Location: a house
Posts: 1,986
| Re: problem with new dingo
clock the axles a bit, that should free it up.
|
03-03-2013, 04:21 PM | #3 |
Rock Crawler Join Date: Jan 2013 Location: Cen Cal
Posts: 556
| Re: problem with new dingo
Be sure and align the set screws that attatch each end of the shafts as well.
|
03-03-2013, 09:28 PM | #4 |
RCC Addict Join Date: Sep 2011 Location: Beavercreek, Oregon, USA
Posts: 1,950
| Re: problem with new dingo
There is a mark on each end of the drive shaft that needs to line up to make sure the drive line joints are lined up correctly or as stated above make sure the set screws are aligned. Last edited by k7zpj; 03-03-2013 at 09:31 PM. |
03-04-2013, 05:31 AM | #5 |
Rock Crawler Join Date: May 2012 Location: Columbus
Posts: 676
| Re: problem with new dingo
did that and still correct word is (chattering)
|
03-04-2013, 06:16 AM | #6 |
RCC Addict Join Date: Sep 2011 Location: Beavercreek, Oregon, USA
Posts: 1,950
| Re: problem with new dingo Which drive shaft is having the problem (front or back)? Try testing with only one drive shaft to find the problem one. Check that your upper links match the type of link and length that are shown in the instruction book. |
03-04-2013, 04:31 PM | #7 | |
Rock Crawler Join Date: May 2012 Location: Columbus
Posts: 676
| Re: problem with new dingo Quote:
front and rear but the crazy thing is, is the axles and trany spins freely but as soon as the drive-shafts are on it chatters i clocked the axles and made sure about the drive-shafts but still chatters | |
problem with new dingo - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Problem with Tekin RS system in my LCC, will a BEC fix my problem? | rcboy514 | Electronics | 3 | 01-12-2012 05:55 PM |
Little bit of a problem, Possibly big problem... | C_Money | Electronics | 11 | 03-08-2010 05:49 PM |
Charger problem or power problem? | Rockfrog | Electronics | 4 | 10-09-2009 01:10 PM |
| |