What did you do to you SCX-10 today?

[muddy355]

added a sidewider v3 and a waterproof savox ;)

[wilbywise]

Found the thin part of the ice chunk...!

">

[OH6HEMI]

Originally Posted by Tom95YJ

I mounted up my Crusher XT knockoffs and EBay bead locks . The wheels overall quality is rather nice minus the hardware which could be better. And the tires are stickier then my ripsaws. As soon as my new esc arrives I'm going to test them out at little moab

How much were this wheels?

[Tom95YJ]

Originally Posted by OH6HEMI

How much were this wheels?

45.00 shipped

[rcguy]

Recieved and installed hd bevel gears front and rear 38 13s. Hd transmission outputs and junfac shafts 120-155mm

[T I N Y]

I got my new R2J links in today and slapped them on....(I want to tell everyone that I feel really dirty for replacing my homemade links with these).....LOL BUT they look so nice on there.....I'm a firm believer in function over form anyday.BUT....lol These things are put together very well. And added a little flair to my rig.I like em'.. And yes I know I'm missing a tranny screw....ha ha!

[BoyFreakWonder]

Mounted some currie axles!!

[bigdogs21ford]

Originally Posted by Tom95YJ

I mounted up my Crusher XT knockoffs and EBay bead locks . The wheels overall quality is rather nice minus the hardware which could be better. And the tires are stickier then my ripsaws. As soon as my new esc arrives I'm going to test them out at little moab

Are those tires these. I like the look of them. Where did you find the wheels?

[Johnnysplits]

Originally Posted by T I N Y

(I want to tell everyone that I feel really dirty for replacing my homemade links with these

Shit made by other people will always be better than homemade stuff unless you're the machinist extraordinaire!! I only try to make things that aren't available for purchase.

[axial 4x4 crawler]

Can I say yesterday?!! Well I waterproofed my JK rtr and done some mods here Ill show you:
- I diped the esc chip in plasti-dip (stock ae2)
- Then I double-bolloned the esc and receiver
- Marine greased the inside of the servo then took the whole thing and put it in plasti-dip
- Moved the receiver box to the back of the frame
- Put the battery plate on the Chassis and ziptied it to the shock hoops
- Cut my 1.9 Maxxis tires every other lug*
- Opened up every bearring in the axles and put marine grease in both sides (every bearring in the axles!!)
- Then put a ton of marine grease in both axles
- My aluminum links from axial arrived so I 4-link the front and got my links on w/ the front steering link.
- Then I siliconed the holes in the wheels to stop water from getting in
- I also had to silicone the receiver box because the holes also allowed water in
I still have to mirror the tranny and thats it. My axles make a little noise in them because I put a shit-load of marine grease in them but they don't bind. Thats all I did yestarday and day before that I was working on it all day but I think she is ready to go under water now (its my first truck that is waterproofed I am excited to get it in the mud). But I still want new shocks, and 2.2 mudslingers but thats for later, - axial 4x4 crawler

[Richterat83]

Placed an order to McMaster-Carr for 6 feet of 1/4" and 3/16" stainless. Going to make my own suspension links for the SCX10 and AX-10

Also ordered 4qty 12 packs of revo end caps with stainless balls

[Johnnysplits]

Got a VP cms bracket and some different width wheel hexes on the way.

[T I N Y]

Originally Posted by Johnnysplits

Shit made by other people will always be better than homemade stuff unless you're the machinist extraordinaire!! I only try to make things that aren't available for purchase.

Oh...Not me..If I can make it. I try my best to make it.I just feel better knowing I built it.Some guys go for looks some guys go for what's easiest.Then again some guys go for the bought stuff because they just don't have the "want to" or "How to".I was a machinist for years. But I don't have any of my own equipment.(If I did me and you would be rolling in new shit.....LOL)

[Johnnysplits]

I really wish I had a friend who worked in a machine shop!!

[Tom95YJ]

I finally got around to installing the dingo flares on my xj body ( it's only taken me 2 years )

[Johnnysplits]

Originally Posted by muddy355

added a sidewider v3 and a waterproof savox ;)

Would that be this savox? Savox SW1210SG Waterproof Digital Servo

[6sharky9]

Pulled my 27T custom motor out for maintenance and re installed...Working like a champ again.

[Pat M]

metal sliders

[GLHS592]

Washed it off after enjoying it for 3 hours. I ran two 4000 mah lipos through it. I went exploring behind my house down in the valley. I found a really nice hill full of rocks and ruts. Some of it was really challenging for me. I'm really enjoying my Trail Honcho!

[Johnnysplits]

Absolutely f..ing nothing because I'm waiting on parts...again!