RCCrawler Forums

ecook280 · 02-06-2014, 06:18 PM

walked by them a few times, looked at them, scratched my head, walked away, couldn't get motivated to work on them today lol

arctichorse · 02-06-2014, 06:41 PM

Ordered some parts, my scx10 owns my wallet.

OH6HEMI · 02-06-2014, 08:21 PM

Thank you everyone! The thread has hit 400 posts!

o0wiz0o · 02-07-2014, 12:56 AM

I five starred it! High-Five!

I converted my Honcho to Wroncho!.....Yesterday though.

RubikonKid · 02-07-2014, 07:46 AM

Later today I'll be adding weight to my wheels. I was testing it last night by just laying the weights on the wheels and flexing it out, what a difference it makes.

Richterat83 · 02-07-2014, 07:58 AM

Removed my first saddle Battery trays and went with longer trays to fill in the running boards.
Also wired in new taillights via heyok method (ready for his brake light module)

Traded my simple Led system for a vanquish rear bumper mount so that should be here next week.

2003EDGE · 02-07-2014, 09:06 AM

Picked up a set of TSL XL's with CI foams from Erbing, ordered King 100MM shocks and another hardware kit for my OMF beadlocks. Started getting my electronics ready for the G6 build to commence next week!

Scionizer07 · 02-07-2014, 09:12 AM

Installed my HeyOK 2 position Servo Winch on the JK. Works like a charm on my DX3S!

Might go pick up the F250 cab for the Honcho and start painting...

mallcrawler24 · 02-07-2014, 09:47 AM

switching the front from 3 link to 4 link! hope the metal links i bought come with 4link front and rear.

Scionizer07 · 02-07-2014, 09:56 AM

I installed the RC4WD tow hooks! I think I might get the award for the most modified front stock bumper, lol.

summerof95 · 02-07-2014, 06:49 PM

Built my first set of links (rear lower). What a pain!

Bought some styrene and started working on an overhead console and a scale CB radio to go with the Firetik I made a couple days ago.

allanon1965 · 02-07-2014, 06:52 PM

I now have my winch installed, the new warn 9.5CTI with wireless remote...very easy and powerful...will easily pull my scx10 rubicon up my door!

the only issue I had was the front screws holding the winch plate down..it was very tight between the mounting post and the LED light pod so I had to put the screw in thru the bumper first and then screw it into the winch plate, but still rather easy to do..I don't really see the need for a steel bumper. Especially since I really like the stock bumper looks...

T I N Y · 02-07-2014, 07:00 PM

Got new input shafts.Upgraded from the old no hole to the newer hole through design. So why I was at it I rebuilt the whole diffs and gave them new axle housings.

OH And I waited for my G6 to arrive some more....lol

OhioGuy82 · 02-08-2014, 08:48 AM

Installed a servo bearing on my Honcho. No more play! Nice and tight.

o0wiz0o · 02-08-2014, 08:59 AM

Tested the new Wroncho build.

Sent from my HTC One X using Tapatalk

norcalmk2 · 02-08-2014, 09:14 AM

Quote:

Originally Posted by Scionizer07

I installed the RC4WD tow hooks! I think I might get the award for the most modified front stock bumper, lol.

I see your modified front bumper and raise you this dingo bumper. Cut up sides and capped hard set epoxy. Its trimmed to fit my pro line wrangler Rubicon body.

Sent from my XT907 using Tapatalk

RubikonKid · 02-08-2014, 04:00 PM

Today I weighted my wheels and cleaned my motor

R/CMaxximus5.0 · 02-08-2014, 04:09 PM

I built my G6 kit, its a roller now! Now I'm just waiting to get the rest of my electronics, got a Sv3 ESC and a 3racing winch, haven't decided on motor yet...

mallcrawler24 · 02-08-2014, 04:37 PM

made my 3 link front in to a 4 link front. after i finished installing everything and got it ready to go. my metal links came in! sooo i get to redo it but will wait until i get my level 3 rc 4 link truss in. and my new shocks in. going in for another tear down soon. i love working on my honcho!

Johnnysplits · 02-08-2014, 05:32 PM

Hacked up the other slider and made a new set of tailpipes

02-06-2014, 06:18 PM	#401
ecook280 Newbie Join Date: Jan 2014 Location: Ohio soon to be NC Posts: 32	Re: What did you do to you SCX-10 today? walked by them a few times, looked at them, scratched my head, walked away, couldn't get motivated to work on them today lol

02-06-2014, 06:41 PM	#402
arctichorse Quarry Creeper Join Date: Nov 2010 Location: Sarasota, Florida Posts: 341	Re: What did you do to you SCX-10 today? Ordered some parts, my scx10 owns my wallet.

02-07-2014, 12:56 AM	#404
o0wiz0o RCC Addict Join Date: Feb 2012 Location: UK Posts: 1,015	Re: What did you do to you SCX-10 today? I five starred it! High-Five! I converted my Honcho to Wroncho!.....Yesterday though.

02-07-2014, 07:46 AM	#405
RubikonKid Rock Stacker Join Date: Jan 2012 Location: Winston-Salem Posts: 50	Re: What did you do to you SCX-10 today? Later today I'll be adding weight to my wheels. I was testing it last night by just laying the weights on the wheels and flexing it out, what a difference it makes.

02-07-2014, 07:58 AM	#406
Richterat83 RCC Addict Join Date: Jun 2013 Location: Port Saint Lucie, Florida Posts: 1,050	Re: What did you do to you SCX-10 today? Removed my first saddle Battery trays and went with longer trays to fill in the running boards. Also wired in new taillights via heyok method (ready for his brake light module) Traded my simple Led system for a vanquish rear bumper mount so that should be here next week.

02-06-2014, 08:21 PM	#403
OH6HEMI Pebble Pounder Join Date: Nov 2013 Location: Corsicana Posts: 128	Thank you everyone! The thread has hit 400 posts!

02-07-2014, 09:06 AM	#407
2003EDGE Rock Crawler Join Date: Jul 2005 Location: Spartanburg Posts: 860	Re: What did you do to you SCX-10 today? Picked up a set of TSL XL's with CI foams from Erbing, ordered King 100MM shocks and another hardware kit for my OMF beadlocks. Started getting my electronics ready for the G6 build to commence next week!

02-07-2014, 09:12 AM	#408
Scionizer07 Pebble Pounder Join Date: Jan 2009 Location: Parkesburg Posts: 125	Re: What did you do to you SCX-10 today? Installed my HeyOK 2 position Servo Winch on the JK. Works like a charm on my DX3S! Might go pick up the F250 cab for the Honcho and start painting...

02-07-2014, 09:47 AM	#409
mallcrawler24 Pebble Pounder Join Date: Jan 2014 Location: richmond Posts: 104	Re: What did you do to you SCX-10 today? switching the front from 3 link to 4 link! hope the metal links i bought come with 4link front and rear.

02-07-2014, 09:56 AM	#410
Scionizer07 Pebble Pounder Join Date: Jan 2009 Location: Parkesburg Posts: 125	Re: What did you do to you SCX-10 today? I installed the RC4WD tow hooks! I think I might get the award for the most modified front stock bumper, lol.

02-07-2014, 06:49 PM	#411
summerof95 Pebble Pounder Join Date: Feb 2014 Location: NH Posts: 181	Re: What did you do to you SCX-10 today? Built my first set of links (rear lower). What a pain! Bought some styrene and started working on an overhead console and a scale CB radio to go with the Firetik I made a couple days ago.

02-07-2014, 06:52 PM	#412
allanon1965 I wanna be Dave Join Date: Feb 2013 Location: NW Indiana Posts: 3,196	Re: What did you do to you SCX-10 today? I now have my winch installed, the new warn 9.5CTI with wireless remote...very easy and powerful...will easily pull my scx10 rubicon up my door! the only issue I had was the front screws holding the winch plate down..it was very tight between the mounting post and the LED light pod so I had to put the screw in thru the bumper first and then screw it into the winch plate, but still rather easy to do..I don't really see the need for a steel bumper. Especially since I really like the stock bumper looks... Attached Images

02-07-2014, 07:00 PM	#413
T I N Y RCC Addict Join Date: May 2008 Location: Southern,WV Posts: 1,136	Re: What did you do to you SCX-10 today? Got new input shafts.Upgraded from the old no hole to the newer hole through design. So why I was at it I rebuilt the whole diffs and gave them new axle housings. OH And I waited for my G6 to arrive some more....lol Last edited by T I N Y; 02-07-2014 at 11:13 PM.

02-08-2014, 08:48 AM	#414
OhioGuy82 Rock Stacker Join Date: May 2013 Location: Appalachia Posts: 75	Re: What did you do to you SCX-10 today? Installed a servo bearing on my Honcho. No more play! Nice and tight.

02-08-2014, 08:59 AM	#415
o0wiz0o RCC Addict Join Date: Feb 2012 Location: UK Posts: 1,015	Tested the new Wroncho build. Sent from my HTC One X using Tapatalk

Sponsored Links

What did you do to you SCX-10 today? - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
scx cherokee and my f100 scalin today....	josh97	Axial SCX-10	2	08-28-2011 04:55 PM
Ogt my scx 10 tr today	scaleerdad	Axial SCX-10	2	10-15-2009 09:44 PM

02-08-2014, 04:00 PM	#417
RubikonKid Rock Stacker Join Date: Jan 2012 Location: Winston-Salem Posts: 50	Re: What did you do to you SCX-10 today? Today I weighted my wheels and cleaned my motor

02-08-2014, 04:09 PM	#418
R/CMaxximus5.0 Rock Crawler Join Date: Mar 2008 Location: 920 Valley of the Fox Posts: 768	Re: What did you do to you SCX-10 today? I built my G6 kit, its a roller now! Now I'm just waiting to get the rest of my electronics, got a Sv3 ESC and a 3racing winch, haven't decided on motor yet...

02-08-2014, 04:37 PM	#419
mallcrawler24 Pebble Pounder Join Date: Jan 2014 Location: richmond Posts: 104	Re: What did you do to you SCX-10 today? made my 3 link front in to a 4 link front. after i finished installing everything and got it ready to go. my metal links came in! sooo i get to redo it but will wait until i get my level 3 rc 4 link truss in. and my new shocks in. going in for another tear down soon. i love working on my honcho!

02-08-2014, 05:32 PM	#420
Johnnysplits I wanna be Dave Join Date: Jan 2009 Location: New Port Richey, FL. Posts: 2,545	Re: What did you do to you SCX-10 today? Hacked up the other slider and made a new set of tailpipes

RCCrawler Forums

Thread: What did you do to you SCX-10 today?