Relocation Battery Plate for Axial SCX10 II

[Stomper Fan 777]

I just installed this new Metal Battery Relocation Plate for Axial SCX10 II Kit Version
And the Metal Servo Relocation / Bumper Mount for Axial SCX10 II
I had no problems installing them fairly easy to do even for me lol.
Eliminates a lot of plastic part's and lowers the center of gravity of the battery.
Both part's together cost $47.oo
I thinks it's a good upgrade for the SCX10 II ~ I am satisfied with the new setup.

Metal Battery / ESC Relocation Plate for Axial SCX10 II AX90046

Metal CMS Servo Relocation / Bumper Mount for SCX10 II XJ Cherokee AX90046


Just to Note: ( This Setup Will Not Work On The RTR Version ) ~ Because of the transmission.

PS: ( Them are Stock website pics of the product's ) ~ ( I will have pics of my truck with them installed soon ) !!!

[Stomper Fan 777]

The Pics of my truck with the New Setup...

[allanon1965]

Its too bad that does away with the servo winch location. I prefer a servo winch over a bumper mounted scale winch.

[Ghonda99]

Do you need any extra parts for the servo relocation, or does it use the stock linkage? I like the way this looks and it would definitely clean up some of the electronics I'm using as well.

[Traulus]

Looks cool,but then there is no servo winch option with that setup

[Brlowe]

I like the looks of this. I ordered a set. I do not care about a servo winch. If I add a winch it will be for scale anyway so it will be a bumper mounted winch.

[Stomper Fan 777]

The setup uses the stock steering linkage no adjustments are necessary.
You will need to reverse the steering on your controller.

PS: About the servo winch,
I just have the Scale RC4WD winch, But I can always upgrade to there stronger $99. one. that mounts on the bumper.

[Stomper Fan 777]

Hot Racing SCXT2401 Aluminum Steering Servo Mount - Axial SCX10 II

Hot Racing SCXT2401 Aluminum Steering Servo Mount - Axial SCX10 II SCX2 | eBay

Hay I bought this a few months ago and I don't need it now so if someone could use it e-mail me.
Brand new sill in the package. ~ It's Free not asking for anything in trade and will pay the shipping also.
Just wanted to give something back for putting up with me over the past four years...
Will ship it anywhere in the US lower 48 only.

PS. I know, I don't post likes as I should but I like everyone's scale truck build's just to clear that up.

** ( UP DATE 8/8/2017 ) ** Thanks for the replies It's Going To a Good Home !!!
I was fair about it and answered the first person to reply about it that could use it.

[Stomper Fan 777]

All the part's replaced with the new setup.

[Kumz]

nice. like that it removes a bunch of plastic junk. thanks for the share!

[Brlowe]

Mine came today. Nice quality and good fit.

[Megalodon]

Doesnt this set up cause for a loss in suspension travel? When I installed it I noticed the screw on the servo horn hit the tie rod?

[Topher Builds]

Any one have a link/lead on a kit for the rtr? Mostly just wanting the battery to lay down instead of being tall on its side.

[Crazed]

Looks groovy except for the bumper mount, I don't run a slide in bumper anymore

[Stomper Fan 777]

Them are older pics I mounted an Integy Battery Tray on top of The Battery Relocation Plate sense then.
I think it Gave it a better look over all.
I did have to shorten the Integy battery tray a little bit for everything to mount up right.









I use a Duratrax Onyx LiPo 2S 7.4V 5000mAh 35C Hard Case Battery,
With this setup, And it fits with no problem.

[DangerousDan]

Originally Posted by Pant Danza

Any one have a link/lead on a kit for the rtr? Mostly just wanting the battery to lay down instead of being tall on its side.

GensAce 2200Mah 3s lipo batteries will lay flat in the stock setup. I know that doesn't answer your question, but just saying. Those batteries can be found for about $15.00, so it might even be a cheaper option.

[saddlesore]

how does this adjust for the different servo lengths?