RCCrawler Forums
Page 10 of 53 « First 56789 10 111213141520 Last »
Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial Wraith (http://www.rccrawler.com/forum/axial-wraith/)
-   -   Wraith Beginners Guide (http://www.rccrawler.com/forum/axial-wraith/323522-wraith-beginners-guide.html)

Harley 08-22-2011 10:16 PM
Quote:
Originally Posted by Burn (Post 3244021)
Hey, was wondering if anyone has heard a clank when switching between forward and reverse from a stop or slow roll. Nothing at speed, if you pick it up and rock forward/reverse you can hear it. Kinda sounds like the way it did if you put a playing card in your spokes of a bicycle.

Stock wraith internals motor, trans, gears and stuff.

Thanks in advance.
First of all you need to isolate the problem. Find out if it is coming from the trans or one of the axles.

Disconnect one driveshaft at a time and see if you can stop the noise. Once it stops you'll know where the sound is. If it does t stop then it's in the motor/trans.

My guess is your stock motor is about to bite the dust.

Burn 08-23-2011 12:54 PM
Thanks for the reply, I did just reassemble it so no problem taking it back down, should have thought of that. (common sense) goes a long way "thumbsup"

ESC 08-23-2011 07:58 PM
Do you think I should wait for the tekin pro 4 or buy the tekin 13.5???

Harley 08-23-2011 09:28 PM
Quote:
Originally Posted by ESC (Post 3245805)
Do you think I should wait for the tekin pro 4 or buy the tekin 13.5???
I don't know a thing about the new Tekin motor. The 4 pole motors are great torque wise and if it's sensored as well then it will probably be a nice combo. What is the turn value though?

ESC 08-24-2011 12:02 AM
heres the link

http://www.teamtekin.com/pro4.html

Harley 08-24-2011 07:23 AM
Quote:
Originally Posted by ESC (Post 3246165)
A 13.5 is 3500 KV and it looks like you can get the Pro 4 in a 3300 KV version. It will be a little faster but should have better torque as well. All in all it would likely be a killer setup. As far as waiting goes, you'll have to decide that yourself.

skid 08-24-2011 09:10 AM
Stormer Hobbies shows the 3300kv pro4 tekin motor in stock."thumbsup"

ESC 08-24-2011 03:31 PM
More of waiting is the money and my options are between the new tekin pro4 and the spektrum dx3c or the normal 13.5 and the futaba 4pl ???????????????

Harley 08-24-2011 03:35 PM
Quote:
Originally Posted by ESC (Post 3246996)
More of waiting is the money and my to chooses are between the new tekin pro4 and the spektrum dx3c or the normal 13.5 and the futaba 4pl ???????????????
The 13.5 will still be a good motor and the 4PL is in a completely different class then the 3C. If those two options were up to me I wouldn't even question stepping up to a good radio.

ESC 08-24-2011 04:14 PM
so then should I get dig or 4ws?????


well actually is more like where and when I am gonna use a 4ws. It is very nice and looks pretty cool put I donŽt know

Harley 08-24-2011 04:26 PM
Quote:
Originally Posted by ESC (Post 3247047)
so then should I get dig or 4ws?????


well actually is more like where and when I am gonna use a 4ws. It is very nice and looks pretty cool put I donŽt know
The 4PL can do both. Go read my build. I had both installed but decided to remove the dog because I didn't need it with the 4WS. I would suggest 4WS and a winch.

ESC 08-24-2011 04:38 PM
besides competing for what can a use a winch???

ESC 08-24-2011 04:47 PM
hey harley I have seen some pics from your wraith on facebook how do you do to lower it ???

It looks awesome

Harley 08-24-2011 05:12 PM
Quote:
Originally Posted by ESC (Post 3247077)
besides competing for what can a use a winch???
It's actually a lot of fun when out trail riding.

ESC 08-24-2011 07:25 PM
Thanks IŽll think about it but I am steal wondering how do you do to lower that much the wraith???

Harley 08-24-2011 07:57 PM
Quote:
Originally Posted by ESC (Post 3247356)
Thanks IŽll think about it but I am steal wondering how do you do to lower that much the wraith???
Flip the shock mounts and Proline Powerstroke shocks made for the front of a Slash (3.5").

rustynails78 08-24-2011 08:58 PM
Hey harly just wanted to say thanks for helping me.out with my.warith it was a bad radio and now I need to send the radio back do u have the address so I can send it back to axail

Harley 08-24-2011 09:24 PM
Quote:
Originally Posted by rustynails78 (Post 3247506)
Hey harly just wanted to say thanks for helping me.out with my.warith it was a bad radio and now I need to send the radio back do u have the address so I can send it back to axail
It's at the bottom of this page.

http://axialracing.com/page.php?Id=3225

ESC 08-24-2011 10:00 PM
Thanks for everything;-)

buzzbuzzard 08-26-2011 03:07 PM
Harley? The axial hd lockers are no beuno. I know you mentioned Stage3 lockers. But, can't find them anywhere. Any other possible replacments?


All times are GMT -6. The time now is 07:24 PM.
Page 10 of 53 « First 56789 10 111213141520 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com