RCCrawler Forums

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial Wraith (http://www.rccrawler.com/forum/axial-wraith/)
-   -   JIA's IFS Ultra4 build (http://www.rccrawler.com/forum/axial-wraith/388684-jias-ifs-ultra4-build.html)

JasonInAugusta 07-02-2012 11:54 PM

Re: JIA's IFS Wraith build
 
A few upgrades.
http://sphotos.xx.fbcdn.net/hphotos-...45251860_n.jpg

scottanthony 07-03-2012 12:20 AM

Re: JIA's IFS Wraith build
 
Nice build, who says EXO's weren't good for anything?

YoUnG_vErSiOn 07-03-2012 12:25 AM

Re: JIA's IFS Wraith build
 
Quote:

Originally Posted by JasonInAugusta (Post 3805999)

Does anyone make some thin beadlock rings for the RC4WD wheels? I can't remember.

MTHEAD is your man. pm him, hell take care of you.*

JasonInAugusta 07-03-2012 02:30 AM

Re: JIA's IFS Wraith build
 
Switches.

Stig has them.

http://sphotos.xx.fbcdn.net/hphotos-...74810319_n.jpg

desertmaxx 07-03-2012 12:13 PM

Re: JIA's IFS Wraith build
 
nice dash."thumbsup"
Quote:

Originally Posted by JasonInAugusta (Post 3806344)


FireWire79 07-03-2012 03:47 PM

Re: JIA's IFS Wraith build
 
Man JIA, if I didn't admire your quality work I'd say I hate you. But that's not nice, so I'll just say I envy you and you're awesome fab skills.


Also, are you at Schoefield Barracks now? I see that you're in Honolulu now?

whatchaknowabouthat 07-03-2012 03:55 PM

Re: JIA's IFS Wraith build
 
Nice build so far dude.

JasonInAugusta 07-03-2012 05:49 PM

Re: JIA's IFS Wraith build
 
Quote:

Originally Posted by FireWire79 (Post 3807149)
Man JIA, if I didn't admire your quality work I'd say I hate you. But that's not nice, so I'll just say I envy you and you're awesome fab skills.


Also, are you at Schoefield Barracks now? I see that you're in Honolulu now?

:lol:

Thanks. I prefer not to say where we are. Honolulu is as much as I'm comfortable putting out. One of those things.

frdtrkguy 07-03-2012 07:33 PM

Re: JIA's IFS Wraith build
 
Hey JIA,

Couple questions..

Do the kit Wraith wheels fit the exo front w/o clearance issues?
Is the width similar to the wraith axle?

Thanks!!

FireWire79 07-03-2012 08:06 PM

Re: JIA's IFS Wraith build
 
Quote:

Originally Posted by JasonInAugusta (Post 3807330)
:lol:

Thanks. I prefer not to say where we are. Honolulu is as much as I'm comfortable putting out. One of those things.

Yeah yeah yeah. OPSEC and all that jazz. Believe me, I know all about it. I've had my fair share of those briefings.

tcm glx 07-03-2012 10:13 PM

Re: JIA's IFS Wraith build
 
Quote:

Originally Posted by Bullitrockcrawl (Post 3803406)
Thanks for the inspiration "thumbsup"

http://img.photobucket.com/albums/v3...626_104309.jpg

Can you help me with how you fit the wraith bumper on it ???


Build thread on this one??

JIA, any pics of the bottom, what do the two chassis lookalike together.

XSRCdesign 07-04-2012 10:14 AM

Re: JIA's IFS Wraith build
 
LOVE it!

been wanting to do this for a while, its almost asking for it so bad that I'm afraid Axial is already up to something. and I would be sad if they do after dropping that much coin on kits.

great idea on the dimple dies, ive been scratching my head on that one for years, consider that idea stolen."thumbsup"

k9popo 07-04-2012 11:23 AM

Re: JIA's IFS Wraith build
 
Quote:

Originally Posted by XSRCdesign (Post 3808222)

great idea on the dimple dies, ive been scratching my head on that one for years, consider that idea stolen."thumbsup"

x2"thumbsup"

JasonInAugusta 07-05-2012 01:53 AM

Re: JIA's IFS Wraith build
 
Quote:

Originally Posted by frdtrkguy (Post 3807475)
Hey JIA,

Couple questions..

Do the kit Wraith wheels fit the exo front w/o clearance issues?
Is the width similar to the wraith axle?

Thanks!!

No, the Wraith wheels don't clear the Exo knuckles. Width is listed at 11.6" for both on Tower Hobbies.

Quote:

Originally Posted by FireWire79 (Post 3807517)
Yeah yeah yeah. OPSEC and all that jazz. Believe me, I know all about it. I've had my fair share of those briefings.

I've just found that there are people that go to great lengths to dig for information. For various reasons.

Quote:

Originally Posted by XSRCdesign (Post 3808222)
LOVE it!

been wanting to do this for a while, its almost asking for it so bad that I'm afraid Axial is already up to something. and I would be sad if they do after dropping that much coin on kits.

great idea on the dimple dies, ive been scratching my head on that one for years, consider that idea stolen."thumbsup"

:lol: Steal away!

Quote:

Originally Posted by k9popo (Post 3808307)
x2"thumbsup"

You too!

GCRad1 07-05-2012 09:35 AM

Re: JIA's IFS Wraith build
 
Hey Jason! Great to see you in action again - and from this side... !

Natedog 07-05-2012 10:38 AM

Re: JIA's IFS Wraith build
 
Quote:

Originally Posted by tcm glx (Post 3807714)
Build thread on this one??

JIA, any pics of the bottom, what do the two chassis lookalike together.

x2 on both of these sweet lookin builds!

JasonInAugusta 07-05-2012 11:48 AM

Re: JIA's IFS Wraith build
 
Quote:

Originally Posted by GCRad1 (Post 3809471)
Hey Jason! Great to see you in action again - and from this side... !

Thanks, Rodney.

JasonInAugusta 07-06-2012 12:06 AM

Re: JIA's IFS Wraith build
 
BIG order was placed today with various vendors and manufacturers.

Incoming from Axial, Castle Creations, Dynamic Concepts, Hitec, Hot Racing, Mad Dog RC, MIP, RC4WD, STRC, and Tekin.

I'm pushing to get this thing wrapped up and tested before the 22nd.

Let the games begin! :lol:

JasonInAugusta 07-06-2012 01:58 AM

Re: JIA's IFS Wraith build
 
Messing around with the front suspension a bit.

Wish Pro-Line would include hardware with their shocks.

For those of that have been around long enough to remember...no, that is not Jax Crawler fuel. :lol:

http://sphotos.xx.fbcdn.net/hphotos-...96655346_n.jpg

Brandon 07-06-2012 09:01 AM

Re: JIA's IFS Wraith build
 
Quote:

Originally Posted by JasonInAugusta (Post 3810710)
For those of that have been around long enough to remember...no, that is not Jax Crawler fuel. :lol:

I'm glad you clarified. :ror:


All times are GMT -6. The time now is 05:44 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com