RCCrawler Forums
Page 9 of 42 « First 45678 9 101112131419 Last »
Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial Wraith (http://www.rccrawler.com/forum/axial-wraith/)
-   -   JIA's IFS Ultra4 build (http://www.rccrawler.com/forum/axial-wraith/388684-jias-ifs-ultra4-build.html)

frdtrkguy 07-09-2012 04:06 PM
Re: JIA's IFS Wraith build
 
Quote:
Originally Posted by XSRCdesign (Post 3815378)
I like how much crap you guys are giving him over the out drive cups.

He built this thing in a hotel room with little more than a few hand tools, I'm sure he made sure they aren't gonna fall out.
Quote:
Originally Posted by SwampDawg (Post 3815384)
give that poor guy a break! :lmao:
Im not giving any crap :roll:

Just trying to work out the details for my own junk..

JasonInAugusta 07-09-2012 04:08 PM
Re: JIA's IFS Wraith build
 
Quote:
Originally Posted by XSRCdesign (Post 3815378)
I like how much crap you guys are giving him over the out drive cups.

He built this thing in a hotel room with little more than a few hand tools, I'm sure he made sure they aren't gonna fall out.
:lol:

Not my first rodeo, right?

SwampDawg 07-09-2012 04:13 PM
Re: JIA's IFS Wraith build
 
eitherway jasoninaugusta....You are doing an AMAZING job!!

CarterFab 07-09-2012 05:09 PM
Re: JIA's IFS Wraith build
 
In case you haven't gotten ahold of MThead on your rings, he does already have that ring bolt pattern and dimensions for that exact wheel. He did mine a while back.
http://i484.photobucket.com/albums/r...8/2e2e95ea.jpg

Soulo747 07-09-2012 06:23 PM
Blindingly bright, retina searing, solar-level radiation spewing light bar?



Stig has it.

XSRCdesign 07-09-2012 07:56 PM
Re: JIA's IFS Wraith build
 
Quote:
Originally Posted by JasonInAugusta (Post 3815390)
:lol:

Not my first rodeo, right?
That's what you get for taking a break..

JasonInAugusta 07-10-2012 12:44 AM
Re: JIA's IFS Wraith build
 
Quote:
Originally Posted by XSRCdesign (Post 3815718)
That's what you get for taking a break..
:lol: True.

The new guys don't know me. :lol:

I'm good with that. "thumbsup"

JasonInAugusta 07-10-2012 03:56 AM
Re: JIA's IFS Wraith build
 
I'm loving the reduced wiring with the MadDogRC stuff installed. Instead of having all the previous wiring for each LED, I now have just two wires for a whole 4" LED strip. Four wires up top is much better than ten.

Got the rock lights installed, so that's one less thing.
http://sphotos.xx.fbcdn.net/hphotos-...66772898_n.jpg

Also picked up an ARB diff cover for the rear. Still need to change the screws for the C-hubs - the ones that came with my Vanquish hubs were too long and hit the universal shaft.
http://sphotos.xx.fbcdn.net/hphotos-...74564737_n.jpg

DISTURBIN' tha PEACE 07-10-2012 11:31 PM
Quote:
Originally Posted by JasonInAugusta (Post 3816179)
:lol: True.

The new guys don't know me. :lol:

I'm good with that. "thumbsup"
Haha! Newb! :lol:

Every time I get to see this, I want it even more. Now go put that other light bar on the honcho.

JasonInAugusta 07-10-2012 11:58 PM
Re: JIA's IFS Wraith build
 
Quote:
Originally Posted by DISTURBIN' tha PEACE (Post 3817580)
Haha! Newb! :lol:

Every time I get to see this, I want it even more. Now go put that other light bar on the honcho.
:lol: I told you I'll build one for you.

The other light bar is for this, just need to get it mounted.

DISTURBIN' tha PEACE 07-11-2012 01:06 AM
Quote:
Originally Posted by JasonInAugusta (Post 3817592)
:lol: I told you I'll build one for you.

The other light bar is for this, just need to get it mounted.
I'm on the hunt for an exo then!

I mean the stock bar w/5 lights.

JasonInAugusta 07-11-2012 01:45 AM
Re: JIA's IFS Wraith build
 
Ah, gotcha!

JasonInAugusta 07-11-2012 02:38 AM
Re: JIA's IFS Wraith build
 
Sized up a small Thunder Power 3-cell lipo for lights and winch. 850mAh.

Made a plate from .030" Lexan and mounted it with 3mm button heads on the Wraith transmission case.
http://sphotos.xx.fbcdn.net/hphotos-...70507142_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-...11665738_n.jpg

http://sphotos.xx.fbcdn.net/hphotos-...71800028_n.jpg

FireWire79 07-11-2012 06:56 AM
Re: JIA's IFS Ultra4 build
 
Do you plan on having those switches in the ceter console wired to anything?

JasonInAugusta 07-11-2012 01:05 PM
Re: JIA's IFS Ultra4 build
 
Quote:
Originally Posted by FireWire79 (Post 3817777)
Do you plan on having those switches in the ceter console wired to anything?
Yes, that's why they're there. "thumbsup"

Szczerba 07-12-2012 07:58 AM
Re: JIA's IFS Ultra4 build
 
Think I missed it. What was the length on those rear shocks with the Rear Exo-Graft?

FireWire79 07-12-2012 11:53 AM
Re: JIA's IFS Ultra4 build
 
Quote:
Originally Posted by JasonInAugusta (Post 3818141)
Yes, that's why they're there. "thumbsup"
What? It's a valid question.

They could just be cosmetic.

YoUnG_vErSiOn 07-12-2012 12:27 PM
Re: JIA's IFS Ultra4 build
 
Quote:
Originally Posted by FireWire79 (Post 3819407)
What? It's a valid question.

They could just be cosmetic.
he answered your question, maybe you didn't like the delivery....but regardless..deliverance.



























*

braceysdad 07-12-2012 12:47 PM
Re: JIA's IFS Ultra4 build
 
JIA, or is it JIH... Anyway, welcome to the hobby. There is already an asshole on here that has 21 page build threads. He may get jealous, just sayin.

Carry on

braceysdad 07-12-2012 12:54 PM
Re: JIA's IFS Ultra4 build
 
1 Attachment(s)
This is what happened to the last guy that tried to out-do him...


All times are GMT -6. The time now is 01:46 AM.
Page 9 of 42 « First 45678 9 101112131419 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com