04-23-2013, 10:59 PM | #1 |
Newbie Join Date: Apr 2013 Location: Bethel Springs
Posts: 45
| My wraith Build
Hi everyone I am a newbie to rccrawlers n was just wanting opinions on my wraith build. I dont compete or anything, I just hang out with my friends n bash, rock climb, etc. I have so far Wraith kit not the rtr Hitec HS-7955tg Ultra torque titanium gear digital servo axial simple led lights n controller rc4wd 2.2 Dick Cepek internal beadlock wheels rc4wd 2.2 interco Irok super soft n sticky tires rc4wd axial HD Bevel gear set 43t/13t rc4wd 2 speed transmission SHD Differential Lockers Junfac Hardenen driveshafts Integy Billet machined front axle integy Billet machined rear axle Integy Billet machined lower suspension link mounts Msr11 Rock crawler shocks HR aluminum cnc upper ladder bars CKRC battery forward plate CKRC level 3 Droop kit Castle sidwinder 4600kv brushless motor and speed controller Turngy 3s 2200 lipos |
Sponsored Links | |
04-23-2013, 11:35 PM | #2 |
Rock Stacker Join Date: Feb 2013 Location: Apache Junction
Posts: 82
| Re: My wraith Build
Pics dude! Toss out some pics of the wraith in action!
|
04-24-2013, 12:33 AM | #3 |
Newbie Join Date: Apr 2013 Location: Bethel Springs
Posts: 45
| Re: My wraith Build
I dont have it together yet. LOL!! I am waiting on the brown truck!! But I will Definatly post pics when i get it built!!!! |
04-24-2013, 03:33 AM | #4 |
Quarry Creeper Join Date: Oct 2012 Location: meriden
Posts: 204
| Re: My wraith Build
Anxious to see. Some pics....
|
04-24-2013, 04:47 PM | #5 |
Newbie Join Date: Apr 2013 Location: Bethel Springs
Posts: 45
| Re: My wraith Build I hope the pics work!!!! I got the trans in today so I packed it with grease n put it on. I used a 9 tooth pinion and a 60 tooth spur. Maybe I will get the rest of my stuff tomorrow and get it together over the weekend. |
04-26-2013, 02:05 AM | #6 |
Newbie Join Date: Apr 2013 Location: Bethel Springs
Posts: 45
| Re: My wraith Build
ok guys I got my integy stuff in today!!! i went ahead n changed the gears in my axles and got them mounted up. I also got my forward battery plate and got it in. Sry for no pics. I got excited and went to work on this thing n didnt even think about pics till now n realized I didnt take any. I WILL get some pics posted up tom!!! I hope my servo comes tom so I can can get it mounted on my trans. After that I can start putting it back together. Also I wont get to completely finish it this weekend because my wheels just now shipped today.
|
04-27-2013, 03:16 AM | #7 |
Newbie Join Date: Apr 2013 Location: Bethel Springs
Posts: 45
| Re: My wraith Build
Ok guys I have been working on the wraith all night!! LOL!! I got to a stopping point until my wheels get here next week and my controller n receivers. I got the suspension all done and finished up. It seems to work extremely well esp for a first build on any rc!!! I had to move my steering servo back about 1/8 inch so the servo arm would clear the frame and give me more flex n travel. My friend Justin made a new servo plate out of aluminum on his small cnc machine in the shop. My ride height is about the same as a stock wraith with a level 3 lowering kit but I have so much more travel. I am using 128mm shocks with some truly homemade custom lowering bracketry going on. LOL!!!!! Here are a few pics of my homemade lowering brackets and of the flex it has. I really dont know how its going to do but I am sooooo ready to find out!!! If it doesnt work I will try something else. Its a hobby right!! |
04-30-2013, 08:49 PM | #8 |
Newbie Join Date: Apr 2013 Location: Bethel Springs
Posts: 45
| Re: My wraith Build
Ok guys I got everything in and got it almost together!!! I am a newbie so figureing out a few things took alittle time. With the help of my friends we got the controller figured out. I farm so I know I have been kinda slow compared to other people. Its spring so we have been busy. Its supposed to rain fri so I am hoping to take this thing out on a good run n get some video for you guys!!!
|
05-03-2013, 02:36 AM | #9 |
Newbie Join Date: Apr 2013 Location: Bethel Springs
Posts: 45
| Re: My wraith Build
Here is a little vid of my wraith. I know Im a newbie n this is my first build with anything custom so its not as detailed as some others. I got the rear axle tore apart and the rear pinion bearing went down. I got some new bearings but I did get the gears. I was going to take another vid of it running but the gears let go after just a few seconds of running. I should get my new gears on monday. Let me know What you guys think for a newbie and any suggestions on what to do next. I do have so vanquish steering and titanium links otw also. B7A903AA-4069-47D9-A692-24CB6DD71DE3-61190-0000125FAF6A095C.mp4 Video by tnspark82 | Photobucket |
05-03-2013, 02:37 AM | #10 |
Newbie Join Date: Apr 2013 Location: Bethel Springs
Posts: 45
| Re: My wraith Build |
My wraith Build - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
1.9 Wraith Build Help | UnlimitedJDB | 1.9 Scale Rigs | 4 | 09-13-2012 09:50 AM |
1.9 Wraith build | rckjeep | Axial Wraith | 25 | 07-07-2012 02:47 AM |
UK Wraith Build | o0wiz0o | Axial Wraith | 6 | 04-24-2012 12:08 PM |
My wraith build so far | wraith89 | Newbie General | 3 | 02-02-2012 09:44 AM |
| |