RCCrawler Forums
Page 5 of 43 1234 5 67891015 Last »
Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)
-   Axial XR10 (http://www.rccrawler.com/forum/axial-xr10/)
-   -   a tuber (http://www.rccrawler.com/forum/axial-xr10/268701-tuber.html)

kineteks 01-10-2011 12:02 PM
"I want your wheels"thumbsup"
Or maybe you're busy in the Dungeon tooling up to produce the ultimate XR10 servo mount for the masses :twisted:
X2
X3
XX5!"

...but I want your chassis:mrgreen:
wicked nice"thumbsup"

EGRESSor 01-11-2011 08:34 AM
i started with the servo mounts , esc /batt mounts
but need to finish all the berg knuckles and weights and lots ofax10 parts first:roll:

some wheels will come too
http://i39.servimg.com/u/f39/11/99/05/64/rimg0011.jpg

DickyT 01-11-2011 08:45 AM
Nice start to the wheels Christian!

stelerzman 01-11-2011 05:21 PM
Quote:
Originally Posted by fa1rch1ld (Post 2628225)
I'm curious how the axles will hold up with a brushless system...Be cool to see it
running.
motorman is running brushless and hasnt had a problem with HR gears, and 9mm bearing mod. still running strong.

stelerzman 01-11-2011 05:24 PM
Quote:
Originally Posted by EGRESSor (Post 2642597)
some pics of the 5x10 flanged bearing mod

http://i29.servimg.com/u/f29/11/99/05/64/cimg1350.jpg
drilled out to 10mm

http://i29.servimg.com/u/f29/11/99/05/64/cimg1351.jpg
.2mm grinded off the 36t and .3mm of the top housing

http://i29.servimg.com/u/f29/11/99/05/64/cimg1352.jpg
stock

http://i29.servimg.com/u/f29/11/99/05/64/cimg1353.jpg
after grinding

http://i29.servimg.com/u/f29/11/99/05/64/cimg1354.jpg
fits nice

http://i29.servimg.com/u/f29/11/99/05/64/cimg1355.jpg
added a .2mm shim between the bearing and the 12t gear

http://i29.servimg.com/u/f29/11/99/05/64/cimg1356.jpg
and a .2mm shim to the stepped gear

http://i29.servimg.com/u/f29/11/99/05/64/cimg1357.jpg

all bearings are ceramic abec5
the flanged ones are glued in w. Loctite 638
good thing you did the motor plate mod. "thumbsup""thumbsup""thumbsup""thumbsup".

stelerzman 01-11-2011 05:27 PM
Quote:
Originally Posted by JeremyH (Post 2716183)
The truck looks good Christian! Let's see how those weights mount!


I've always wondered how those rubber things mounted to the servos! I always just throw them in the trash... :lol:
if you dont already know it acts as an insulater. soaks up some of the vibration. nice to have.

Jeepkid 01-13-2011 12:16 PM
Quote:
Originally Posted by EGRESSor (Post 2850726)
What turn motors and what cell lipo?

EGRESSor 01-13-2011 01:23 PM
45 or 40 or 35t
i will use 3s lipo , its the best for me and i can power the hv300 without a bec


some knuckle weight mounts

http://i39.servimg.com/u/f39/11/99/05/64/rimg0012.jpg

http://i39.servimg.com/u/f39/11/99/05/64/rimg0013.jpg

http://i39.servimg.com/u/f39/11/99/05/64/rimg0014.jpg

just need to round the edges and make the weights

Dr.Frank 01-13-2011 01:46 PM
Knuckle weight mounts are great, as usually "thumbsup"

Greetiings Frank

DickyT 01-13-2011 01:55 PM
Great work on the knuckle weight mounts "thumbsup" I love seeing your innovation.

EGRESSor 01-13-2011 02:27 PM
thank you guys:mrgreen:

Jeepkid 01-13-2011 02:28 PM
I though 35t was too much for the sidewinder micro on 3s.

EGRESSor 01-15-2011 02:24 PM
Quote:
Originally Posted by Jeepkid (Post 2858695)
I though 35t was too much for the sidewinder micro on 3s.
i havn´t tried it


weights are done

http://i39.servimg.com/u/f39/11/99/05/64/cimg1525.jpg

http://i39.servimg.com/u/f39/11/99/05/64/cimg1526.jpg

http://i39.servimg.com/u/f39/11/99/05/64/cimg1527.jpg

http://i39.servimg.com/u/f39/11/99/05/64/cimg1528.jpg

http://i39.servimg.com/u/f39/11/99/05/64/cimg1529.jpg

http://i39.servimg.com/u/f39/11/99/05/64/cimg1530.jpg

80gramm per weight is not a lot , but is is mounted as low as possible and should work great:mrgreen:

Gatekeeper 01-15-2011 03:17 PM
You are good "thumbsup" can you make the weights that will fit vp new dh os there slw

EGRESSor 01-21-2011 04:57 AM
Quote:
Originally Posted by Gatekeeper (Post 2862971)
You are good "thumbsup" can you make the weights that will fit vp new dh os there slw
i will test mine ,
if it works like it should, the weights will come to fit slw´s too"thumbsup"

the servo mount plate and knuckle arm made of 7075
http://i39.servimg.com/u/f39/11/99/05/64/cimg1613.jpg

it´s perfect for VP knuckles and 180° servo with the losi servo arm

i will post some more pics tonight

EGRESSor 01-21-2011 01:39 PM
some pics

http://i39.servimg.com/u/f39/11/99/05/64/cimg1614.jpg

no need to cut the shock , i cut it for another version i tried

http://i39.servimg.com/u/f39/11/99/05/64/cimg1615.jpg

cut the old servo mount

http://i39.servimg.com/u/f39/11/99/05/64/cimg1616.jpg

i added 2 spacers to raise the servo posts

http://i39.servimg.com/u/f39/11/99/05/64/cimg1617.jpg

http://i39.servimg.com/u/f39/11/99/05/64/cimg1618.jpg

http://i39.servimg.com/u/f39/11/99/05/64/cimg1619.jpg

http://i39.servimg.com/u/f39/11/99/05/64/cimg1620.jpg

http://i39.servimg.com/u/f39/11/99/05/64/cimg1621.jpg


i use the Losi crawler arm , needs some grinding

http://i39.servimg.com/u/f39/11/99/05/64/cimg1622.jpg

and i countersunk the back to use one of the Ofna M3 balls

http://i39.servimg.com/u/f39/11/99/05/64/cimg1623.jpg

EGRESSor 01-22-2011 02:30 PM
wanted to save some weight :flipoff:

http://i39.servimg.com/u/f39/11/99/05/64/cimg1624.jpg

annedecke 01-23-2011 12:44 AM
I know u like it .... but with these wheels u can´t use rusty screws anymore :mrgreen:!
Great work! "thumbsup"

EGRESSor 01-24-2011 04:01 PM
i will use new screws:ror:

front wheels will be a little more

http://i39.servimg.com/u/f39/11/99/05/64/cimg1634.jpg

http://i39.servimg.com/u/f39/11/99/05/64/cimg1635.jpg

Tydl 01-25-2011 06:01 AM
I like your idea with the steering servo. Are there any drawbacks or trade offs? Have you run it like that yet?


All times are GMT -6. The time now is 08:02 PM.
Page 5 of 43 1234 5 67891015 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com