|
Re: ZZR's...now it's a REMEDY 3.5 Quote:
Quote:
|
ZZR's...now it's a REMEDY 3.5 |
Re: ZZR's...now it's a REMEDY 3.5 Thank you for your kindness and advice this weekend. It is very good to be help for my debut. pleasure |
Re: ZZR's...now it's a REMEDY 3.5 You are welcome Maduff!!! Nice to meet you in person last weekend!! Don't forget to check your elektronic. CU Last weekend i comped at french nats/BIG and the remedy with the new setup worked perfect!!!I could't say that i got a podium but the final was shootout modus and i was pointed out bevor i could clear gate 9. No luck at the end but on saturday i felt really closed to my new rig and i did have a lot of fun and no issues!! Last weekend was a very good training for the most importend comp for me in september and the training way i went the last weeks seems to be the right direction. BIG thanks to the french orga and congrats to Christian/EGRESSor!!! Result after six courses... http://img.tapatalk.com/d/14/07/29/uhyregez.jpg After final... http://img.tapatalk.com/d/14/07/29/a2u2ysa2.jpg |
Re: ZZR's...now it's a REMEDY 3.5 Great Stephan "thumbsup" It seems there is only one course you didn´t get your best performance - the Finalcourse :roll: |
Re: ZZR's...now it's a REMEDY 3.5 Stephan it looks like you was killing it all day long!!! Looking forward to September as well :) |
Re: ZZR's...now it's a REMEDY 3.5 Hello, Very good job stephan "thumbsup" With the rain the afternoon, the course had become very difficult! |
Re: ZZR's...now it's a REMEDY 3.5 Damn youre crawler looks fine,, I run a CK reptile now,,and I am very happy with it,,, but seen how you ride youre remedy makes me want one aswell.. The remedy is mutch lower than the reptile is,, and I have putted spacers inside my 3.5" kyosho shocks to get it alittle lower,,and it helped alot,,pluss I added on some extra weight on the steering knukles,,have around 120g pr side now,,and the total weight off the xr10 is just below 2kg,,so 1760 without the RC-Bros weights,, |
Re: ZZR's...now it's a REMEDY 3.5 Quote:
Quote:
Quote:
Quote:
I like to go low, that's the reason why i went these way but not all drivers like to go that way. It depends on your driving style. Some drivers like it to go more high to have the chance to cleare higher gates more easyly. If you go the low way you have to work on your driving style to have the chance to progress same higher gates without pushing the gatemarker. You have to test at comptime if it's working well for you. But one thing i could say...the remedy works more than good:mrgreen: By the way - i did't drove as low as pictures shows because i recogniced in france that i have to preload my springs in front a little bit. Here is a video from francis_63 took and posted on youtube. Course 1: ZZR1100 at BIG2014 French Nats - YouTube ...here you could see how slippery it was. |
Re: ZZR's...now it's a REMEDY 3.5 Respect!!!! I did see a few places where you could have hade use off some extra weights on the steeringknukles,,, but you drive so fast that you jump over the places the rest off us crawls over,,, Damn good crawler and a finetuned PILOT!!!!! |
Re: ZZR's...now it's a REMEDY 3.5 "thumbsup" |
ZZR's...now it's a REMEDY 3.5 Only one week after BIG I was't idle and comped again at "Höhlencomp 2014". I was't in perfect mod like BIG and i made a lot of very stupid mistakes. The stupid one was on course 4. I still was the first driver on course and i thought i could catch bonus 2 but time was running to fast(each course 5 minutes including two bonus) and it was missing two seconds to finish course without DNF. After that course i was not really happy about and it was not easy to come back in normal condition but i'm thinking back what i'm learnig in international comping and tryed to finished the followimg 7 courses. I performed not great but i took no DNF after course 4. That was the reason why i got the 2nd for BmachineRC. i'm very happy with these result and congrats to manu/racer_zh for the win!! He did a great job and performed much better than me yesterday!!! Next comp follows in two weeks - nats of swiss! http://img.tapatalk.com/d/14/08/04/7ujyzy7e.jpg http://img.tapatalk.com/d/14/08/04/vasusejy.jpg |
Re: ZZR's...now it's a REMEDY 3.5 Quote:
Nice going:-) Where can i find info about swiss nats? Sent from my iPhone using Tapatalk |
Re: ZZR's...now it's a REMEDY 3.5 Quote:
|
Re: ZZR's...now it's a REMEDY 3.5 RTR for worlds. Last weeks i trained very hard and a lot of hours. Now i'm still in best condition ever. If it's enough for a good position we will see. Only for these comp i put a set of new 400 pullers, new 7950, new BEC and a set of new mini's inside. I know it's a little bit to much, but i think i will get only one time the chance to fight for that title. I'm very happy to fly tomorrow to USA and have the chance to meet all the great drivers from USA and the other countrys. Alao looking forward to meet one time more the driver i know from finnland, swiss and norway. I also really hope to get the chance to meet Mr. Jake Wright...he is still the reason why i was starting to crawl(LCC time). Now only one picture from the parts who need's the most time to do...i know it's old style but they still working fine for me. Perhaps i will change next year...perhaps... http://img.tapatalk.com/d/14/09/03/u9e6yhy5.jpg |
Re: ZZR's...now it's a REMEDY 3.5 Safe travels Stephan...... I will see you in Rhode Island, USA! |
No need to change the tire choice, Stephan.. My favorite pro tire! Until the world runs out of them and members here stop selling them, I'll continue to run them! Unless you have new ones sitting around and want too change.. Then sell them all to me! Haha.. See you Thursday afternoon.. Safe travels. |
Re: ZZR's...now it's a REMEDY 3.5 The winner will be Norwegian,,,and the rest off the podium will be scandinavians aswell,, I know the Finns are hungry to show what they have up their sleves,,and Maby a Dude from Sweits will do it OK too.. You will run with youre remedy and xr10 axels,, I will cheer for you since you problely are one off very few with xr10 axels this year,, There is to mutch off these dlux berg axels and now also the CCC berg/Bulldog axels, and offcourse the biggest newcommer off the all,,, B2!!!!!!! There will be plenty off great pilots with B2 axels,,,I hope someone with axial xr10 axels win the hole comp,,,then the guys who have used 1000$ on just the axels will stay after comp and hold the lightest crawler,,he he he,, if I know Usa right there will be alot off waiting before you get a chance to leave the comparea,,the sponsors will have alot off pictures taken with the teampilots,,,The boss off rc4wd havent met in person yet many off his new pilots,,There is some that got that golden place this summer,,I think off some off the Finns and some off oure Vikings from the NORTH!!!! |
Re: ZZR's...now it's a REMEDY 3.5 PS is Fritzthefly going over the atlanter????? |
Re: ZZR's...now it's a REMEDY 3.5 Good luck Stephan "thumbsup" I hope you get your best performance,then you will surprise some people :twisted: Take your chance! |
| All times are GMT -6. The time now is 07:14 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com