Re: Axial 1/18 Yeti (and Yeti Score) Here is a pic of mine with the Traxxas Latrax wheels,and mini rival tires,the added width,and traction helped tremendously, the hex hole on my wheels are tapped out to m4,so I can use my RC4WD wideners when my body shows up. It looks good with the TT body,but the tires look wide when looking underneath,but performance,over looks 1st!That's the servo saver I use for the mg90 servo,they have more than enough power,no need to spend alot on servos,and to ease up any binding in the steering rack,just back the screw out on the rack assembly,you'll feel it loosen up! http://i1127.photobucket.com/albums/...psgm8hqdt0.jpg http://i1127.photobucket.com/albums/...pstinimmbe.jpg http://i1127.photobucket.com/albums/...psvdid6pmf.jpg |
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
|
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
|
Re: Axial 1/18 Yeti (and Yeti Score) Me likey! I considered that when i couldn't find a scale looking tire short enough. But there's that "what if i screw em up and they look like crap" side of me that has always kept me from cut'n up good tires. |
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
https://uploads.tapatalk-cdn.com/201...ce665c14cc.jpg |
Re: Axial 1/18 Yeti (and Yeti Score) Here is how it looks with wideners,this isn't the body Im gonna be using,just to show the stance,it actuall handles really well now! http://i1127.photobucket.com/albums/...pstpfpaeyt.jpg http://i1127.photobucket.com/albums/...psx1ljfsnp.jpg http://i1127.photobucket.com/albums/...ps56zessu2.jpg http://i1127.photobucket.com/albums/...psg8tydamc.jpg |
Re: Axial 1/18 Yeti (and Yeti Score) Body showed up,and did a little test fit! Im happy now! http://i1127.photobucket.com/albums/...pstahqzzqx.jpg http://i1127.photobucket.com/albums/...psunv8ip9f.jpg |
Re: Axial 1/18 Yeti (and Yeti Score) Has anyone found metal diffs yet? Someone said possibly traxxas mini ones work but ?? |
Re: Axial 1/18 Yeti (and Yeti Score) Traxxas LaTrax gears DO NOT work. They are a different size, different pitch, etc. http://img.photobucket.com/albums/v2...ps1rpnxmtf.jpg I've got metal lockers coming very soon though. |
Re: Axial 1/18 Yeti (and Yeti Score) Ok guys, I have read this entire thread and I am still having a hard time deciding if this setup would be a decent option. I know there was talk of motor diameter and this is on the smaller side, but after looking at the mamba micro x it looks to be the same diameter. Any input on a budget brushless system would be much appreciated. https://www.amainhobbies.com/hobbywi...030010/p279160 Sent from my SM-G935V using Tapatalk |
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
I think that motor may be a little anemic. I ran a 24mm motor and it did fine. Too many kV for me so I put the brushed back in and ordered a 24mm low kV to try. A 28mm motor will fit but be aware the longer can ones may cause problems. |
Re: Axial 1/18 Yeti (and Yeti Score) Ok, that's what I thought. I'm on the hunt for a decent brushless combo for less than $50. If I can't find anything I guess I'll just go with the mamba. Sent from my SM-G935V using Tapatalk |
Re: Axial 1/18 Yeti (and Yeti Score) Here's the motor I'm going to try out in a 3000kV flavor. http://m.banggood.com/Racerstar-2445...p-1116661.html |
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
Sent from my SM-G935V using Tapatalk |
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
55 on azon https://www.amazon.com/gp/product/B0...A3K45LR5ID5Z1A |
Re: Axial 1/18 Yeti (and Yeti Score) That looks like it might fit the bill. Waterproof, 2-3s capable, and the price is right. Sent from my SM-G935V using Tapatalk |
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
https://www.hobbywingdirect.com/coll...ushless-system |
Re: Axial 1/18 Yeti (and Yeti Score) Awesome , how does it compare to the castle system? I see it's slightly higher higher kv. Also I can't seem to find that combo on the hw page. |
Re: Axial 1/18 Yeti (and Yeti Score) its not sold as a combo on HW's site, just put em both in your cart. |
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
Now my TT was completely different. It had zero issues with tight steering and in fact, I'm still running the stock servo in it. |
Re: Axial 1/18 Yeti (and Yeti Score) Which pinions work on the hobbywing motors? 2.3 traxxas? How many teeth should I gear it at? |
Re: Axial 1/18 Yeti (and Yeti Score) I installed a 2445 3000kV sensorless motor. It has a 2.3m shaft and the Losi Mini pinions have a smaller hole than the stock pinion. The stock pinion fit the 3000kV motor and it netted nearly stock speeds. So I dug around in my box of gears and found a 22tooth that fit. I had to file down the set screw so that it's clear the motor plate. It has good low speed and a fair amount of speed now. I'm happy with it. |
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
Quote:
Quote:
|
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
|
Re: Axial 1/18 Yeti (and Yeti Score) Yes, The first prototypes came in, but were very far off dimensionally from what they needed to be. I had them re-run them with the tweaks, and those were supposed to show up Friday, but didn't, USPS shows maybe today for delivery. I will probably have something to share tomorrow if these are dimensionally correct. |
Re: Axial 1/18 Yeti (and Yeti Score) Made some new trail with the Yeti Jr in mind- bigger berms! A lot less flipping. Moving the battery foward helped too. <iframe width="560" height="315" src="https://www.youtube.com/embed/Z7dwLsCw6Z0" frameborder="0" allowfullscreen></iframe> My front ring and pinion is starting to slip under heave load, maybe a shim will help. I need to tear it open and check. |
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
http://img.photobucket.com/albums/v2...psf7ssuaja.jpg I need to get these installed in the yeti and get some testing done to make sure there are no problems. I expect to start a pre-order thread very soon for these. Pricing will be discussed in the upcoming thread in the vendor's section, so please do not ask in this thread. |
Re: Axial 1/18 Yeti (and Yeti Score) Are there going to be axles to accompany that beauty? |
Re: Axial 1/18 Yeti (and Yeti Score) I need that. The open diff makes it really hard to do anything with my JR. |
Re: Axial 1/18 Yeti (and Yeti Score) Same here. I may just try some Silly Putty. |
Re: Axial 1/18 Yeti (and Yeti Score) Has anyone replaced the upper rear link with 2 links with balls on the end? I know it kinda acts as a natural sway bar, but I don't like the way when the axle rolls that it bends the tabs on the chassis where the link mounts. I'd like to replace all of the rear links with turnbuckles, I just wondered if anyone know of any that fit. |
Re: Axial 1/18 Yeti (and Yeti Score) Any updates Monkeyracer? I'm gonna crack open this rear axle and superglue everything if I can't get a locker soon. |
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
|
Re: Axial 1/18 Yeti (and Yeti Score) GPM has some aluminum trailing arms out 1/18 Axial Yeti Jr Aluminum Rear Lower Chassis Link Parts GPM MYT014L Black | eBay |
Re: Axial 1/18 Yeti (and Yeti Score) Lower links aren't exactly the first thing these things need. Where is the 2 piece front bulkhead to make pinion mesh less of a guess? Where are the metal diffs and axles/shafts? We need those things, not metal trading arms... though they are nice �� |
Re: Axial 1/18 Yeti (and Yeti Score) That's the easiest thing to make. |
Re: Axial 1/18 Yeti (and Yeti Score) Major problem with solid lower links, you wont get any articulation out of the rear. Currently the flex in the nylon links allow for the axle to articulate while also acting as a sway bar. You make that rigid and the only thing the rear axle can do is travel up/down. Careful buying those. Quote:
|
Re: Axial 1/18 Yeti (and Yeti Score) Seems like these are fading away. I run mine nearly daily for 10-15m but it's just because it's so small I leave it on the chest freezer in my garage. So it's right there for a quick spin around the driveway. All the hype before the reaease and the novelty is quickly waning. |
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
|
Re: Axial 1/18 Yeti (and Yeti Score) Quote:
|
All times are GMT -6. The time now is 05:59 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com