Yeti Jr. upgrades

[Jboucher]

Has anyone tried the bigger gmade XD shocks on the yeti jr yet ?

My GPM Racing rear shocks are getting stuck, I suspect the shaft is scratched and the piston might be damaged.

I can't find good reliable 1/18 shock at all...

I might just try to rebuild the stock shocks again.

Sent from my Pixel 2 XL using Tapatalk

[Deadbydawn]

Originally Posted by Jboucher

Shapeways is taking a huge cut. Contact Anthony Chwalek on Facebook, he will give you a much better price.
Tell him I sent you guys
I have been doing marketing for him since I got my tray 2 years ago.
Still no cut for me :(

Sent from my Pixel 2 XL using Tapatalk

I did a search and couldn't find Anthony Chwalek (not and that made RC parts anyways)

Could you give me a link? Thanks

[Jboucher]

Originally Posted by Deadbydawn

I did a search and couldn't find Anthony Chwalek (not and that made RC parts anyways)



Could you give me a link? Thanks

https://www.facebook.com/anthony.chwalek

Sent from my Pixel 2 XL using Tapatalk

[Deadbydawn]

Originally Posted by Jboucher

https://www.facebook.com/anthony.chwalek

Sent from my Pixel 2 XL using Tapatalk

Thank you sir - I actually found this guy in my first search but it doesn't mention anything about it so I thought it wasn't him.

How much are the battery trays and do they fit the Can Am Maverick yeti jr too?

[Deadbydawn]

[QUOTE=Lugnutt;5951738]

Originally Posted by Deadbydawn

Thanks bud- I appreciate the link for the charger.
I have read it takes a long time to charge via USB.
I have this charger :
https://www.amainhobbies.com/protek-...k-8517/p488513

The other thing I read about the Yeti Jr Can Am was the controller can only be used with the electronics on the vehicle- not cool imo.

The remote has a receiver that is compatible
Link to it⤵️

Remote+receiver
https://www.horizonhobby.com/product...stem-spmstx200

Receiver
https://www.horizonhobby.com/product...iver-spmsrx200

Hey I just noticed your link for a receiver that works with the maverick remote - Thanks!

I don't know how big the regular yeti jr remotes are but the Can Am Maverick remote seems huge LOL! I think it might be made out of legos

[Lugnutt]

[QUOTE=Deadbydawn;5953340]

Originally Posted by Lugnutt

Hey I just noticed your link for a receiver that works with the maverick remote - Thanks!

I don't know how big the regular yeti jr remotes are but the Can Am Maverick remote seems huge LOL! I think it might be made out of legos

Your welcome, I’m always just trying to find things and I happened to find that a few months ago so I put it up

[Deadbydawn]

Originally Posted by Lugnutt

How were the stock electronics in the maverick? Good, bad tell me what u think

I finally got to drive it around a bit and imo they are not too great . I noticed a pretty good delay from when I hit the throttle to when it took off even after adjusting the throttle trim knob. I was inside the house and fairly close so.... If that is the way it is I will be putting a decent esc/motor https://www.amainhobbies.com/castle-...147-01/p451393
in it and using my Axial Tactic TTX300 3 Channel 2.4ghz Radio Transmitter &TR325 3ch Receiver.

[Lugnutt]

Originally Posted by Deadbydawn

I finally got to drive it around a bit and imo they are not too great . I noticed a pretty good delay from when I hit the throttle to when it took off even after adjusting the throttle trim knob. I was inside the house and fairly close so.... If that is the way it is I will be putting a decent esc/motor https://www.amainhobbies.com/castle-...147-01/p451393
in it and using my Axial Tactic TTX300 3 Channel 2.4ghz Radio Transmitter &TR325 3ch Receiver.

That sucks I thought that because they were newer they would be a bit better quality. I wonder if it is the remote or the electronics?? And I also want to go to the mmx, but I’m gonna bullet proof the drivetrain first

[Jboucher]

Originally Posted by Lugnutt

That sucks I thought that because they were newer they would be a bit better quality. I wonder if it is the remote or the electronics?? And I also want to go to the mmx, but I’m gonna bullet proof the drivetrain first

The remote is good
I'm still using the stock radio (TTX200) with a hobbywing 1060 ESC and a tactic TR325 receiver

Sent from my Pixel 2 XL using Tapatalk

[Lugnutt]

Originally Posted by Jboucher

The remote is good
I'm still using the stock radio (TTX200) with a hobbywing 1060 ESC and a tactic TR325 receiver

Sent from my Pixel 2 XL using Tapatalk

we are talking about the maverick remote

[Lugnutt]

Originally Posted by Jboucher

Has anyone tried the bigger gmade XD shocks on the yeti jr yet ?

My GPM Racing rear shocks are getting stuck, I suspect the shaft is scratched and the piston might be damaged.

I can't find good reliable 1/18 shock at all...

I might just try to rebuild the stock shocks again.

Sent from my Pixel 2 XL using Tapatalk

If you rebuild the stockers, could you test fit the extra resi shock caps on the front and test for clearance

[Jboucher]

I just rebuilt the 4 stock shocks with the new red Springs.
Sorry didn't see your request.

Pretty sure it dosent fit the faux reservoir in the front

Sent from my Pixel 2 XL using Tapatalk

[Lugnutt]

Originally Posted by Jboucher

I just rebuilt the 4 stock shocks with the new red Springs.
Sorry didn't see your request.

Pretty sure it dosent fit the faux reservoir in the front

Sent from my Pixel 2 XL using Tapatalk

ok thanks anyways, i just wondered if they would fit with your wheel/tire combo

[Jboucher]

To give you an idea, first picture is the rear shock and then then front shock

Sent from my Pixel 2 XL using Tapatalk

[Brake Weight]

Found this clone
https://m.banggood.com/SUBOTECH-BG15...p-1428055.html

[Jboucher]

Originally Posted by Brake Weight

Found this clone
https://m.banggood.com/SUBOTECH-BG15...p-1428055.html

As always the description is so bad I can't believe it's English...
They seem to talk about carbon fiber and all metal diffs.
3 differentials like a race truck?

I see no pictures of the interior and electronics, must be typical low end crap

Sent from my Pixel 2 XL using Tapatalk

[Brake Weight]

Most likely. I’ll look deeper once I get home and off the road.

[Lugnutt]

Originally Posted by Jboucher

To give you an idea, first picture is the rear shock and then then front shock

Sent from my Pixel 2 XL using Tapatalk

I’m do how this was supposed to help me could you please elaborate?

[Lugnutt]

Originally Posted by Brake Weight

Found this clone
https://m.banggood.com/SUBOTECH-BG15...p-1428055.html

This thing is wack

[Lugnutt]

I see axial steel front shafts, did u use the steel gpm cvd and hex or the aluminum axial ones