| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
05-03-2012, 01:00 PM
| #1 |
| RCC Addict  Join Date: Oct 2008 Location: Finland
Posts: 1,265
|  Nordic Crawler Design Knuckle Weight System for VP XR10 and Wraith Knuckles The Nordic Crawler Design Weight System is discontinued as from January 7th. From now on RcBros will make and sell this weight system. Please contact them for more information. I will finish the orders agreed on but will not take new orders on weights. Should you have any issues with weights bought from me, RcBros has kindly promised to take care of you. Tomi  Nordic Crawler Design introduces a new knuckle weight system for the Axial XR10 and Wraith using Vanquish Products knuckles. The system consists of a weight holder that mounts into the tie rod arm/steering link holes + your chosen amount of weights. Each weight weighs approximately 15g. A pair of weights is 30g which is 1.05 oz. The weight is 5mm thick and the diameter of the weights and weight holder is 39mm. The weight holder is made out of 5000 grade aluminum and is 1.5mm thick. Due to the slots in the weight holder, the position of the weights can be adjusted. This is your perfect knuckle weight for your Axial XR10 or Wraith that uses Vanquish Products knuckles. PRICING One pair of weight holders: 6 euros One pair of weights: 8 euros Please note! If not otherwise agreed upon, I will ship each set of weights with one pair of weights tapped for M3 screws. The rest of the weights will have a 3.2mm hole. If you need more than one pair of weights tapped for M3 hardware, please specify that in your order. You will have to source M3 hardware of your choice.Shipping through First Class Priority Mail (no tracking, weight up to 250g)
Please note that all payments have to be made in euros. All parts are made in house and usually ships within 5-7 days after your order. Please PM me if you are interested. Tomi     If you are using the Wraith knuckle you have the option of mounting one pair of weight behind the weight holder. If you need this, please specify that when you order. Last edited by Tomy; 01-07-2013 at 12:19 PM. |
|  |
| Sponsored Links | |
| | |
|
05-03-2012, 05:25 PM
| #2 |
| E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Nordic Crawler Design Wheel Weights for Axial Wraith Knuckle
Buy with confidence from this guy! He is awesome has great communication! Love working with him!
|
|
| |
|
05-03-2012, 06:18 PM
| #3 |
| I wanna be Dave Join Date: Aug 2011 Location: Burque
Posts: 3,805
| Re: Nordic Crawler Design Wheel Weights for Axial Wraith Knuckle
Very very sick bro. Gonna have to get some of these as well as some carbon fiber goodies  |
|
| |
|
05-03-2012, 06:42 PM
| #4 |
| I wanna be Dave Join Date: Sep 2005 Location: Houston, TX
Posts: 16,952
| Re: Nordic Crawler Design Wheel Weights for Axial Wraith Knuckle
Those are bad ass!
|
|
| |
|
05-03-2012, 08:57 PM
| #5 |
| RCC Addict Join Date: Sep 2006 Location: Depew
Posts: 1,551
| Re: Nordic Crawler Design Wheel Weights for Axial Wraith Knuckle
I wonder if I can make these work with XR/VP knuckles...
|
|
| |
|
05-03-2012, 10:31 PM
| #6 | |
| RCC Addict Join Date: Oct 2008 Location: Finland
Posts: 1,265
| Re: Nordic Crawler Design Wheel Weights for Axial Wraith Knuckle Quote:
I don't have the VP knuckles at hand though. But here are a few pics on how they sit on a stock knuckle. You can see that there's a big gap between the weight holder and the surface where the steering link mounts. Also the holes don't line up. But if the VP knuckle is different from stock in these respects, perhaps it could work.   | |
|
| |
|
05-04-2012, 05:04 AM
| #7 |
| RCC Addict Join Date: Sep 2006 Location: Depew
Posts: 1,551
| Re: Nordic Crawler Design Wheel Weights for Axial Wraith Knuckle
Damn..thanks for the pictures.
|
|
| |
|
05-04-2012, 06:51 AM
| #8 |
| I wanna be Dave Join Date: Sep 2005 Location: Houston, TX
Posts: 16,952
| Re: Nordic Crawler Design Wheel Weights for Axial Wraith Knuckle
The VP XR knuckles are quite a bit different from stock. They are setup for a high steer knuckle arm so the mounting holes are much higher. However, they still do not have the mounting holes on both sides of the top of the knuckle.....only on one. |
|
| |
|
05-04-2012, 07:48 AM
| #9 |
| RCC Addict Join Date: Sep 2006 Location: Depew
Posts: 1,551
| Re: Nordic Crawler Design Wheel Weights for Axial Wraith Knuckle
You'd only need one side. Let me know if you want a tester.
|
|
| |
|
05-04-2012, 08:36 AM
| #10 |
| I wanna be Dave Join Date: Oct 2007 Location: Castle Rock, WA
Posts: 8,785
| Re: Nordic Crawler Design Wheel Weights for Axial Wraith Knuckle
Pretty cool idea on the slots for adjustability. Good work.
|
|
| |
|
05-04-2012, 10:19 AM
| #11 | |
| RCC Addict Join Date: Oct 2008 Location: Finland
Posts: 1,265
| Re: Nordic Crawler Design Wheel Weights for Axial Wraith Knuckle Quote:
Ok. So chances are they might share the same dimensions. I'm going to a comp next week and will probably see someone with the Xr10 knuckle. I'll check the dimensions then. Tomi | |
|
| |
|
05-15-2012, 08:58 AM
| #12 |
| RCC Addict Join Date: Oct 2008 Location: Finland
Posts: 1,265
| Re: Nordic Crawler Design Wheel Weights for Axial Wraith Knuckle
Good news for all XR10 knuckle users! Please check the first post for more information. Thanks! |
|
| |
|
05-15-2012, 09:43 AM
| #13 |
| I wanna be Dave Join Date: Aug 2011 Location: Burque
Posts: 3,805
| Re: Nordic Crawler Design Wheel Weights for Axial Wraith Knuckle  Those are nice. Thanks for the options!!
|
|
| |
|
05-21-2012, 11:45 AM
| #14 |
| E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Nordic Crawler Design Knuckle Weight System for VP XR10 and Wraith Knuckles
Nice when I get VP Knuckles I will definetly get some of these How much do a pair of weights weigh? And with the holder for the VP Knuckles?
|
|
| |
|
05-21-2012, 12:02 PM
| #15 |
| Pebble Pounder Join Date: Mar 2012 Location: Visalia
Posts: 149
| Re: Nordic Crawler Design Knuckle Weight System for VP XR10 and Wraith Knuckles
Simple and effective. Me likes.
|
|
| |
|
05-29-2012, 11:43 AM
| #16 |
| I wanna be Dave Join Date: Sep 2005 Location: Houston, TX
Posts: 16,952
| Re: Nordic Crawler Design Knuckle Weight System for VP XR10 and Wraith Knuckles
Holy fast shipping, Weightman! Shipped on 05/23 in Finland........in my hands on 05/29 in Texas. That's 4 business days....  |
|
| |
|
05-30-2012, 02:26 PM
| #17 |
| Rock Crawler Join Date: May 2007 Location: Prescott
Posts: 796
| Re: Nordic Crawler Design Knuckle Weight System for VP XR10 and Wraith Knuckles
Mine are in the mail. Cant wait to try these out. |
|
| |
|
05-30-2012, 11:30 PM
| #18 | |
| RCC Addict Join Date: Oct 2008 Location: Finland
Posts: 1,265
| Re: Nordic Crawler Design Knuckle Weight System for VP XR10 and Wraith Knuckles Quote:
 | |
|
| |
|
05-31-2012, 11:58 AM
| #19 |
| RCC Addict Join Date: Jan 2011 Location: Razorback Haven
Posts: 1,620
| Re: Nordic Crawler Design Knuckle Weight System for VP XR10 and Wraith Knuckles
How about a set of these for my vp knuckles on my berg. |
|
| |
|
06-01-2012, 08:51 PM
| #20 | |
| I wanna be Dave Join Date: Sep 2005 Location: Houston, TX
Posts: 16,952
| Re: Nordic Crawler Design Knuckle Weight System for VP XR10 and Wraith Knuckles Quote:
| |
|
| |
|
Nordic Crawler Design Knuckle Weight System for VP XR10 and Wraith Knuckles - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| VP Knuckle weights fit wraith knuckles??? | Rig Rocker | Axial Wraith | 10 | 03-02-2012 10:19 AM |
| VP knuckle mod on xr10 - Wraith or XR10?? | 001Hulk | Axial XR10 | 9 | 01-03-2012 01:15 PM |
| |
Linear Mode
