RCCrawler Forums

neuera 916 · 02-08-2008, 11:06 PM

sure wish i can go with you bill.
we are finally busy at work now.(sucks)
have fun tommorrow see you sunday.

Trikster · 02-08-2008, 11:27 PM

Neuera, I think the design has merit, but all the little holes might hang up on things (think sandpaper). If it was smooth or had a lot less holes, I think it would be fine.

neuera 916 · 02-08-2008, 11:30 PM

yea it will be another material this was just a mock up because it was easier to bend.

but it works so well over the rocks as it is.

get r done · 02-08-2008, 11:58 PM

Your a FAG

Trikster · 02-09-2008, 12:22 AM

Quote:

Originally Posted by get r done

Your a FAG

I think that is just about enough. I know you guys are just messing around, but that is only because I know you. Some kid or joe could stumble in and might get pissed/offended and report you to the moderators. I would hate to see you guys get banned. Heck, I even think its against the rules...

get r done · 02-09-2008, 09:27 AM

Yes DAD...May I go outside and play in the street now?

Trikster · 02-09-2008, 11:26 AM

Quote:

Originally Posted by get r done

Yes DAD...May I go outside and play in the street now?

Procede, may Darwin be with you.

rockhugger · 02-09-2008, 11:54 AM

Quote:

Originally Posted by neuera 916

yea it will be another material this was just a mock up because it was easier to bend.

but it works so well over the rocks as it is.

I think it actually looks cool, but I still hate it cause you have more and cooler crawlers than I do.

get r done · 02-09-2008, 11:57 AM

lol

Norcal crawler · 02-09-2008, 01:05 PM

Quote:

Originally Posted by get r done

Your a FAG

Quote:

Originally Posted by Trikster

Some kid or joe could stumble in and might get pissed/offended

I think its funny.

get r done · 02-09-2008, 08:32 PM

Who's going in the morning to Folsom?

Natedog · 02-09-2008, 09:24 PM

Quote:

Originally Posted by get r done

Who's going in the morning to Folsom?

I'm going...say 10'ish? See you all at Oak Point!

jimmy1969510 · 02-09-2008, 11:37 PM

Is oak in the same aera of dottons? Dotton is where jessie had a pract. com. last month.

neuera 916 · 02-09-2008, 11:46 PM

oak point is on the way to dottons. just follow the signs and it will bring you to oakpoint.

Norcal crawler · 02-10-2008, 03:13 PM

Hey Bill, can you take some pics of the interior of your 4runner for me? i need some of the back area mostly. Oh and could you take a pic of the inclinometer thing on the dash?

Oh and ive got some rock sliders and a rear bumper from marlin coming for my truck.

1tom2go · 02-10-2008, 06:06 PM

Nice Norcal, but what does that have to do with us out having fun at Folsom today...without you?

Good times today!

neuera 916 · 02-10-2008, 07:09 PM

good day today guys.and yea norcal you need to come out next time we go out.

Norcal crawler · 02-10-2008, 07:13 PM

Quote:

Originally Posted by 1tom2go

Nice Norcal, but what does that have to do with us out having fun at Folsom today...without you?

Good times today!

Well, once again... it wasnt up to me. Everyone else, mom dad and brother were at Modesto or something for a b-ball tournament. they got 1st place though so thats cool. i just stayed here and worked on my bruiser though.. which is why i need the pics.

Jonnie Fraz · 02-10-2008, 07:50 PM

Good time today! Even if I got there late. I realy wanted to try my hand at the comp. No major breakages today just have to figure out if I am gonna send the three link mount back to CKRC or fix it.

KEEPONTRUCKIN · 02-10-2008, 08:15 PM

Here are the scores from today's practice.

These are the scores from both course's...

1. George-32
2. Chuck-33
3. Jesse-34
4. Bill C.-35
5. Daren-44
6. Nate-48
7. One eye-49
8. Randy-54
9. Eric-56
10. Tom-60
11. Clint-71
12. Jimmy-75
13. Bruce-76
14. Jush-78
15. Mike-88

Top 3 for course 1.

1. Chuck- (-3)
2. Jesse- (-2)
3. Bill C.- (-1)

Top 3 for course 2.

1. George-32
2. Chuck-36
Bill C.-36
Jesse-36
Eric-36
Clint-36
Tom-36
4. Daren-37

Good job today guys

it was fun!

02-08-2008, 11:06 PM	#301
neuera 916 Rock Stacker Join Date: Jun 2007 Location: sacramento Posts: 51	? sure wish i can go with you bill. we are finally busy at work now.(sucks) have fun tommorrow see you sunday.

02-08-2008, 11:30 PM	#303
neuera 916 Rock Stacker Join Date: Jun 2007 Location: sacramento Posts: 51	? yea it will be another material this was just a mock up because it was easier to bend. but it works so well over the rocks as it is.

02-09-2008, 11:37 PM	#313
jimmy1969510 Newbie Join Date: Dec 2007 Location: placerville Posts: 13	Folsom lake Is oak in the same aera of dottons? Dotton is where jessie had a pract. com. last month.

02-09-2008, 11:46 PM	#314
neuera 916 Rock Stacker Join Date: Jun 2007 Location: sacramento Posts: 51	? oak point is on the way to dottons. just follow the signs and it will bring you to oakpoint.

02-10-2008, 07:09 PM	#317
neuera 916 Rock Stacker Join Date: Jun 2007 Location: sacramento Posts: 51	? good day today guys.and yea norcal you need to come out next time we go out.

02-08-2008, 11:27 PM	#302
Trikster RCC Addict Join Date: May 2006 Location: Roseville Posts: 1,469	Neuera, I think the design has merit, but all the little holes might hang up on things (think sandpaper). If it was smooth or had a lot less holes, I think it would be fine.

02-08-2008, 11:58 PM	#304
get r done Newbie Join Date: Jun 2007 Location: Elk Grove Posts: 22	Your a FAG

02-09-2008, 09:27 AM	#306
get r done Newbie Join Date: Jun 2007 Location: Elk Grove Posts: 22	Yes DAD...May I go outside and play in the street now?

02-09-2008, 11:57 AM	#309
get r done Newbie Join Date: Jun 2007 Location: Elk Grove Posts: 22	lol

02-09-2008, 08:32 PM	#311
get r done Newbie Join Date: Jun 2007 Location: Elk Grove Posts: 22	Who's going in the morning to Folsom?

02-10-2008, 03:13 PM	#315
Norcal crawler RCC Addict Join Date: May 2006 Location: California Posts: 1,361	Hey Bill, can you take some pics of the interior of your 4runner for me? i need some of the back area mostly. Oh and could you take a pic of the inclinometer thing on the dash? Oh and ive got some rock sliders and a rear bumper from marlin coming for my truck.

02-10-2008, 06:06 PM	#316
1tom2go Quarry Creeper Join Date: Jul 2006 Location: Las Cruces, NM Posts: 412	Nice Norcal, but what does that have to do with us out having fun at Folsom today...without you? Good times today!

02-10-2008, 07:50 PM	#319
Jonnie Fraz Quarry Creeper Join Date: Nov 2007 Location: Sacramento Posts: 244	Good time today! Even if I got there late. I realy wanted to try my hand at the comp. No major breakages today just have to figure out if I am gonna send the three link mount back to CKRC or fix it.

02-10-2008, 08:15 PM	#320
KEEPONTRUCKIN Newbie Join Date: Apr 2007 Location: Orangevale Posts: 5	Here ya go guys! Here are the scores from today's practice. These are the scores from both course's... 1. George-32 2. Chuck-33 3. Jesse-34 4. Bill C.-35 5. Daren-44 6. Nate-48 7. One eye-49 8. Randy-54 9. Eric-56 10. Tom-60 11. Clint-71 12. Jimmy-75 13. Bruce-76 14. Jush-78 15. Mike-88 Top 3 for course 1. 1. Chuck- (-3) 2. Jesse- (-2) 3. Bill C.- (-1) Top 3 for course 2. 1. George-32 2. Chuck-36 Bill C.-36 Jesse-36 Eric-36 Clint-36 Tom-36 4. Daren-37 Good job today guys it was fun!

Sponsored Links

RCCrawler Forums

Thread: S.a.c..... Crwalers