Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

I'd like to see some pics of them mounted with MIP shafts....Hotwheels ???

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

I got these today the first batch and just wanted to show how it fitson my G6 with the MIPs It's tight like decribed from previous post. I no for sure the new V2s will work a lot better and wil be looking foward to getting those. As for these I will install them on my 3yr olds Dingo. Thank for such an awesome product.


http://i841.photobucket.com/albums/z...psf1d3vf3q.jpg

http://i841.photobucket.com/albums/z...pskwykreij.jpg

http://i841.photobucket.com/albums/z...psab08bk6s.jpg

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

pretty tight huh.....

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Part of this came from the fact that the V1s were a tight fit with stock shafts on the G6, I didn't like that and wanted to move them out further, and according to below should work better for most driveshaft set-ups.

Thanks for pics with MIPs. The V2 RULRs move that out 3mm so that should give just enough room to clear with no problems. "thumbsup"

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

I want to try a set of these but with a flipped trans I don't know,my motor endbell is very close to the upper link bolt now and I don't think there will be enough room. Quess I will wait for pics of V2?

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Is your trans mirrored as well as rotated?

It won't work on my sons dingo either, it's tight also like the MIPS with just the stock wild bore 8 drive shafts. So I guess I'll be ordering another set for my sons dingo.


http://i841.photobucket.com/albums/z...pskr6tdgre.jpg

http://i841.photobucket.com/albums/z...pslzg1at3t.jpg

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Mine just showed up. Should be installed and tested this afternoon. "thumbsup"

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Money sent, looking forward to testing these out!

Thanks!

I'm running the RC4WD 2 speed, the newer one, the mount rubs against the motor actually. I'm working on flipping the transmission. Didn't get time to finish yesterday will try and get some more setup tonight with some pics.


Mount hitting the motor
http://i1192.photobucket.com/albums/...psmsk7bbel.jpg

Flipped the transmission plate around no luck though
http://i1192.photobucket.com/albums/...pswtzrvkug.jpg

Installed on Dingo with transfer case no problem took 10 minutes. Still happy with it
http://i1192.photobucket.com/albums/...ps9a06a978.jpg

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

got a wraith trans with the dig in it and these risers work fine! the only problem i have is im running a 550 size motor and that does not fit at all.

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Hi! I made ​​the payment, and you've gone and canceled the transfer? (and so wanted these parts.

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Yes, international orders require extra to cover shipping. I sent three emails to you about it, and never received a response so I cancelled it. I would be glad to fulfill your order, please check your PayPal account for an invoice from me that includes the extra shipping.

As a reminder, any international orders need to pm me first for a shipping quote, otherwise the order will be cancelled within a few days after no response.

They do not fit mip,s and revo 4 mm ends. Great product, great service, even nice packaging. Great job man, I will thro them on my girls truck.

What about a mount that sits more aft on the chassis for the guys running MIPs?
I'm figuring if your running MIPs and decent power then making custom upper links shouldn't be to big of a task.

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

V2's are going out today and tomorrow, so try those and report back.

That would work, and was actually one of the first designs.

Anyone with MIPs, send me a PM to let me know, and I will send a set of EXT mounts along with the V2's I'm already sending out. I figure that those using MIPs will be comfortable with changing/modifying the links.

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

OK, I paid! Waiting for delivery!

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

I got a shipping confirmation today, hopefully they arrive by Saturday so I can test them out this weekend. Will report back. Thanks! "thumbsup"

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Got mine today and installed them. Perfect fit and great functionality!!! Thanks for the awesome product and fast shipping.

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

You are welcome! You'll also be getting a set of the V2's, just got those out in the mail today (for most orders). Once those arrive, feel free to post up some pics and results.