Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

No problem! "thumbsup"

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

I have just discovered there may be an issue with some of the V2's that went out. Apparently the printer software decided part of the piece needs to be completely hollow. This will make them break VERY easily. I will post a picture in a little bit of an example of this type of break.

If you have a V2 that breaks, send me a PM for a free replacement.

I've changed the print preferences and am checking the toolpath each time it prints to make sure this doesn't happen again. I'm pretty upset with the software for doing this, but I will make it right and send corrected parts.

Also, starting now, any RULR sent out will have the holes set at 3mm and will not be tapped. This cuts down on my after-print production work, but you will need to use a locknut on all screws.

Thanks to everyone for the understanding on this.

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Jens, thank you for being on top of things and standing behind your products also letting us know what the situation is and how to take care of it. looking foward to getting mine and testing them out on my end of the month gtg. I'll post up pics as soon as they hit my door."thumbsup""thumbsup"

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Here's a picture of the production issue. If this happens to you, send me a pm and I'll send out a replacement. I'm not sure how many these affect, but the replacements are good to go.

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Got the replacement link risers and they are solid "thumbsup"

Thank you Jens for jumping on the issue and taking care of us "thumbsup"

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

got my v2 risers and rear truss thanks man!

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

So do the v2risers work with a basically stock rear end dingo? I'll be getting your 4 link truss if that makes a difference. If so I'll add a set to my order

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

The risers will work with most SCX10 Chassis based rigs. Those using MIP drive shafts are having fitment issues, but there is a fix in testing for that. Otherwise, these should work for you.
The truss will work with the risers and give the upper links a slightly better axis of rotation for slightly smoother suspension travel.

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

I got my replacement risers last night. Didn't get a chance to install them, but they feel solid. Thanks.

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Pm sent

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

PM sent. We'll keep the chat about custom stuff in its own realm.

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Jens, just wanted to give you and the guys an update that I got the V2s and the extended ones also. I first put on the V2s and just did a lite file like you said before and Bam they fit perfect with no interruptions. Have not put on the extended ones yet but I will then post up pics. Again Jens thanks for a great product.

http://i841.photobucket.com/albums/z...psvg74tgt7.jpg


http://i841.photobucket.com/albums/z...psn9vek0ot.jpg

http://i841.photobucket.com/albums/z...psglzppmwf.jpg

http://i841.photobucket.com/albums/z...psipwbi4mk.jpg

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

That's a really close fit. Does it clear all the way through the suspension cycle?

Yes it does. I'm going to try the extended ones tomorrow see how thy work also and ill post


Sent from my iPhone using Tapatalk

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Ok Jens, I couldn't wait so I tried the extended ones just to see how it would fit and it won't work it's actually tighter by the MIP driveshaft and it gives the pumpkin more pinion angle which make it vibrate. Also when I tried to put the V2s back on one of them snapped in half, so back to stock angle for now.


http://i841.photobucket.com/albums/z...pse12h9uwi.jpg

http://i841.photobucket.com/albums/z...psbq2diu2k.jpg

http://i841.photobucket.com/albums/z...psjq8od242.jpg

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Looks like you got one of the infamous hollow risers. You've got a set of replacements on the way.

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Thanks again Jens, for you top notch costumer service and help with making the risers work from our trials and feed back.."thumbsup""thumbsup"

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Here is mine, it clears real close but no rub on full compression.
http://i5.photobucket.com/albums/y17...ps82d51dd2.jpg

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

I got mine on, not sure which version.
They fit pretty tight with a flipped trans, e-revo ends and Emaxx shafts.
Infact, yes they will rub but only slightly, there's enough beef in the Emaxx yokes to take some rubbing.
http://i15.photobucket.com/albums/a3...psgibxj41i.jpg

My only concern is the forces applied on these mounts.
The forces applied on the uppers are always way greater than on the lowers, the lowers just take a greater beating.
I would feel alot more comfortable if these were machined from aluminum.
Still.....a great job and I'll be beating on them tomorrow. "thumbsup"

Re: JC Auto Design - SCX10 Rear Upper Link Risers - Improved geometry
 

Try grinding a little on both sides of the eyelet..That should get you off the driveshaft.

They look like version 2s as the link mount is off set,,but don't know if they are the Hollow versions or not...youll find out I guess..lol