RCCrawler Forums - 2013 ECC Scaler Jam

Page 11 of 13

Show 40 post(s) from this thread on one page

RCCrawler Forums (http://www.rccrawler.com/forum/)

- East Coast Championship (http://www.rccrawler.com/forum/east-coast-championship/)

- - 2013 ECC Scaler Jam (http://www.rccrawler.com/forum/east-coast-championship/430112-2013-ecc-scaler-jam.html)

Jake	04-22-2013 06:46 PM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by ROWDY RACING (Post 4290451)

You don't mind getting a little mud on your tires do ya?

Its not that, mud is awesome. I was hoping there was mud. I just needed to know if it would be enough to worry about water proofing.

My post was pointed towards your post.:ror:

ROWDY RACING

04-22-2013 06:56 PM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by Jake (Post 4290463)

My post was pointed towards your post.:ror:

So was mine.

Jake	04-22-2013 07:05 PM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by ROWDY RACING (Post 4290495)

So was mine.

But my post was towards your post that was posted after my original post.:ror:

stelerzman

04-22-2013 07:26 PM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by Jake (Post 4290516)

But my post was towards your post that was posted after my original post.:ror:

:lmao::lmao::lmao::lmao:

DickyT

04-22-2013 11:30 PM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by stelerzman (Post 4289140)

The Wraith is ready to go:twisted:.

http://a1.ec-images.myspacecdn.com/i...0fc0da2c/l.jpg

http://a3.ec-images.myspacecdn.com/i...25508b0d/l.jpg

:mrgreen::mrgreen::mrgreen::mrgreen::mrgreen:

NICE John!

I'll bring mine as a spare parts rig if you let me drive yours for the Scaler Jam "thumbsup"

ROWDY RACING

04-23-2013 05:54 AM

Re: 2013 ECC Scaler Jam

Cute doll

stelerzman

04-23-2013 08:20 AM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by DickyT (Post 4290969)

NICE John!

I'll bring mine as a spare parts rig if you let me drive yours for the Scaler Jam "thumbsup"

What wrong with yours?

DickyT

04-23-2013 09:42 AM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by stelerzman (Post 4291274)

What wrong with yours?

Uni and VP knuckle broke at Nat's. VP said they would replace the knuckle but never have, so it sits collecting dust....

Colby

04-23-2013 10:56 AM

Re: 2013 ECC Scaler Jam

You need a uni and a VP knuckle? hell I prob have that downstairs Rich "thumbsup"

Fishmaxx

04-23-2013 12:15 PM

Quote:

Originally Posted by ROWDY RACING (Post 4289193)

Black rubber dildo rumble strips and **** doll hill climbs, yee haw!

No but I got a barrel of sticks and balls for you!

Sent from my SPH-L710 using Tapatalk 2

ROWDY RACING

04-23-2013 12:16 PM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by Fishmaxx (Post 4291592)

No but I got a barrel of sticks and balls for you!

Sent from my SPH-L710 using Tapatalk 2

Sweet! "thumbsup"

stelerzman

04-23-2013 12:37 PM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by Jake (Post 4290445)

yee......haw? :shock::shock::shock:

Thanks stelerz and Colby for the reply."thumbsup"

NP.

Quote:

Originally Posted by ROWDY RACING (Post 4290451)

You don't mind getting a little mud on your tires do ya?

NOPE

Quote:

Originally Posted by Grandmasboy (Post 4290462)

I checked my knuckles today, and yep, they're zero ackerman. Good thing Stelerzman has what you need because I won't be any help.

Destroyer,
I just dug them out and noticed there for an ax10 and I'm not sure they will clear your 1.9 wheels. I'll still bring them though, just in case.

binaryterror

04-23-2013 12:37 PM

Re: 2013 ECC Scaler Jam

Do the trucks need drivers to compete? I never got around to finding the right one...might need to find anything if its mandatory.

DickyT

04-23-2013 02:05 PM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by Colby (Post 4291468)

You need a uni and a VP knuckle? hell I prob have that downstairs Rich "thumbsup"

Just a left knuckle, and the flange bushings for it. I have a set of VVD's I bought at Nat's and never got installed.

I'll dig it out tonight and see if I can find some body panels to put on it, and the interior.

Destroyer

04-23-2013 04:26 PM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by stelerzman (Post 4291618)

Destroyer,
I just dug them out and noticed there for an ax10 and I'm not sure they will clear your 1.9 wheels. I'll still bring them though, just in case.

Thanks I appreciate it."thumbsup" I'll see if I can figure something else out in the next few days, I want to be 100% ready for the scale runs!

DickyT

04-23-2013 04:43 PM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by binaryterror (Post 4291619)

Do the trucks need drivers to compete? I never got around to finding the right one...might need to find anything if its mandatory.

No dolls required... This is more of a run what ya brung kind of deal than a 'scale comp'

Colby

04-23-2013 04:58 PM

Re: 2013 ECC Scaler Jam

Yeah all my buggies dont have a single bit of interior or anything. They are just replicated after real life buggies. This isnt MSD, or NWSC, bring your stuff and have fun, no matter how much Rowdy tries to make fun of you "thumbsup"

ROWDY RACING

04-23-2013 05:43 PM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by Colby (Post 4292077)

how much Rowdy tries to make fun of you "thumbsup"

You guys will be able to make plenty of fun of me trying this whole scale thing out for the first time. ;-)

The rig I am bringing is more of a go fast rig than anything else so I am not sure what to expect. :shock:

binaryterror

04-23-2013 05:53 PM

Re: 2013 ECC Scaler Jam

Quote:

Originally Posted by DickyT (Post 4292050)

No dolls required... This is more of a run what ya brung kind of deal than a 'scale comp'

Quote:

Originally Posted by Colby (Post 4292077)

Yeah all my buggies dont have a single bit of interior or anything. They are just replicated after real life buggies. This isnt MSD, or NWSC

Thanks guys, I've wanted one, but being picky on what fits and all, not sure it'll ever get done.

I can't wait to see this course and put a brutal beating on my Wraith.

Quote:

Originally Posted by ROWDY RACING (Post 4292137)

Do it man, I tried scalers, built a real nice one but it was slow and comping was more exciting. Plus 1.9" tires look good, but lack extreme!

Then I built a ridiculous Wraith "toy", LOL its fun. Sure I love to comp, but when there is downtime or I get frustrated there is seriously nothing like a Wraith going entirely too fast and throwing some roosters to get your mind reset. "thumbsup"

Colby

04-23-2013 05:59 PM

Re: 2013 ECC Scaler Jam

Dont forget too guys, the best part of scalers at ECC is the night trail runs :twisted: For some reason, everything is incredibly harder at night. Bring head lamps, flash lights, etc. Its a ton of fun and usually results in an incredible amount of carnage "thumbsup"

All times are GMT -6. The time now is 05:11 AM.

Page 11 of 13

« First

Show 40 post(s) from this thread on one page