| |
| |||||||
 |
| | LinkBack | Thread Tools | Display Modes |
07-16-2013, 06:27 PM
| #1 |
| Quarry Creeper  Join Date: Feb 2008 Location: stockton
Posts: 394
|  how much lipo in your scaler?
How much lipo do you run in your rig? Just 1 pack or primary and secondary packs? What's your setup and how much power? How much runtime?
|
|  |
| Sponsored Links | |
| | |
|
07-16-2013, 06:43 PM
| #2 |
| RCC Addict Join Date: Mar 2007 Location: Turn the mayflower around.. it will never work
Posts: 1,588
| Re: how much lipo in your scaler?
C3..... 4 wheel steer and winch..... 30t brood.... Can't remember gearing..... 9 lb rig..... 2200mah 3s........ 30mins or so Moa..... 12t cobalt 400 can pullers...... 2200mah 35mins or so. |
|
| |
|
07-16-2013, 06:55 PM
| #3 |
| Rock Crawler Join Date: Jan 2013 Location: Middleburg Florida
Posts: 920
| Re: how much lipo in your scaler?
venom creeper based truck. I run many batteries but I'll choose my most used ones. 1 battery 3pl, 2004gf rx,MMP esc, CCBEC set to 7v 4ws, novak 45t motor, 2 servo winches ( I rarely use these ) 1600 mah 3s 20c .....1hr+ 1800 mah 4s 40c .....1hr+ 3000 mah 3s 30c .....2hr??? I have never killed this battery in this vehicle. I get tired instead |
|
| |
|
07-16-2013, 07:33 PM
| #4 |
| RCC Addict Join Date: Jul 2008 Location: Fox Valley WI
Posts: 1,691
| Re: how much lipo in your scaler?
I run 5000 3S packs in mine. With a 35T motor I get 2 1/2-3+ hours of run time. The 2 speed seems to extend that time even more since I'm usually tooling around in 1st gear.
Last edited by TrailDawg362; 07-16-2013 at 07:37 PM. |
|
| |
|
07-16-2013, 08:48 PM
| #5 |
| I wanna be Dave Join Date: May 2007 Location: Fairfield ME
Posts: 3,886
| Re: how much lipo in your scaler?
Wraith with a 3400kv 4 pole on a 2200mah 3s lipo nets me up to an hour of walking through the woods slow crawling or as little as 20 minutes of bashing.
|
|
| |
|
07-16-2013, 09:07 PM
| #6 |
| RCC Addict Join Date: Apr 2012 Location: Land of 10,000 Lakes
Posts: 1,460
|
I use a reedy 3s 3200mah 20c Lipo on a castle sv2 with a modded Traxxas 12t motor. Works great! Motor gets a little warm, but it always has, sooooo ya. But I get probably about 45 minutes out of it in my scx10 Sent from my crappy concord using Tapatalk 2 Last edited by mitchr97; 07-16-2013 at 09:20 PM. |
|
| |
|
07-16-2013, 09:22 PM
| #7 |
| I wanna be Dave Join Date: Jan 2012 Location: williamsport
Posts: 8,649
|
Class 2 scx, tekin fxr, HH 16t crawlmaster, 2200mah 4s.. Wraith, tekin RS, 13.5t redline, 3300mah 3s.. 1.5 hrs or so for both.. |
|
| |
|
07-16-2013, 10:10 PM
| #8 |
| I wanna be Dave Join Date: May 2011 Location: Lost in Oregon
Posts: 4,450
| Re: how much lipo in your scaler?
HH 35t, over/under gearing in the axles, 56/11 pinion and spur, BEC set at 6v I run Turnigy 1300 MAH 3s, nice small packs...get about 45-60 minutes |
|
| |
|
how much lipo in your scaler? - Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Lipo Scaler Help | loubek88 | Newbie General | 4 | 03-05-2010 09:17 PM |
| on/off switch between Lipo and ESC on a scaler? | BigB_117 | Electronics | 3 | 10-18-2009 12:59 AM |
| |
Linear Mode
