09-29-2015, 12:26 PM | #1 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| ProModeler Servo: 420oz, billet case, o-ringed, $79
anybody heard of these? just got my AMA magazine(RC airplanes) and it had a full review on this servo that did really well in there servo test rig. got very high marks all around. Nominal Voltage*: 6.0 - 7.4VDC Operating Voltage: 5.5 - 8.4VDC Torque: 380 - 420 oz-in Speed: 0.14 - 0.12 sec/60° Frequency: 1520µs/330Hz Dead band: 2µs Weight: 73.5g Wire: JR/265mm The S420BLHV has been created expressly for competition pilots flying thousands of flights/year. Ideally suited to aileron, elevator, and rudder of giant scale models, e.g. 42% IMAC models. This servo centers beautifully, offers superb performance, and is the best we know how to make. In short, this is the top of the line ProModeler servo - no excuses. Billet aluminum case - the entire case is CNC-machined from a solid billet of 6061-T6 aircraft-aluminum. End of story. - Heavy duty dual ball bearing supported output gear with CNC-machined case sections. Gear train-all metal gears makes this servo strong. The 25-spline (Ø5.96mm) output shaft is Futaba compatible for convenience. Material selection makes it tough. For an 800% increase in wearing surface hardness, we use exotic titanium-ceramic (TiCN) armoring for the 7075-T6 output gear (this is the exact same aluminum-alloy used in components of the upper receiver of an M-16 rifle). Intermediate gears are made of 4140 chrome-moly steel. The result is optimum strength and wear characteristics for high precision and long life. - TiCN/7075-T6 output, 4140 chrome-moly steel intermediate, plus 7075-aluminum/4140-steel input-gear O-rings - have you noticed how some really expensive servos don't have o-rings? The claim is electric models make them superfluous. Since getting caught in a pop-up rain shower isn't unheard of, and re-purposing servos into a nitro-powered model a year later happens all the time . . . do you buy that line of reasoning? We figure it's because the manufacturer pockets a few extra bucks - but leaving o-rings out comes at your expense because keeping water, fuel, and exhaust residue out of your servo is important. Wanna know why the S420BLHV is fully o-ringed? Simply because our engineers make these decisions instead of our accountant. - Water resistant case features o-rings beneath the bearing, screw heads, and between case sections. Nitty gritty - it's said the measure of a man is what he does when nobody is looking - take our servo's measure the same way. Ever disassemble a servo? They typically use four long-ass Phillips head screws, which come up from the bottom, sandwich the center section, and actually thread into the plastic top-case, right? However, an S420BLHV is built better. How? To begin, we use grade 12.9 Allen-head machine-thread bolts instead of el cheapo screws. Six come in from the top plus four more from the bottom, and instead of sandwiching the center case, the ten bolts actually thread into the aluminum. The result is a far more rigid assembly that's so much better . . . it's not even fair to compare! Packaging - nestled within a high density foam insert for protection, each S420BLHV servo arrives packed in a jewel case. Since good looks never hurt, we laser-etch our logo into the polished aluminum case. These servo look great - think in terms of the fit and finish equal to, or better than, servos selling for more than $200. Bottom line? For the craftsmen who appreciates our high standards because we pay attention to the smallest detail, we hope you'll be as proud to install them in your model as we are to make them. - Classic jewel case packaging with the servo snugly secured in a high density urethane foam insert http://www.audacitymodels.com/Products/PDRS420BLHV/Default.aspx |
Sponsored Links | |
09-29-2015, 12:50 PM | #2 |
Rock Stacker Join Date: Sep 2015 Location: Florida
Posts: 38
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
That looks very nice! And a good price too. Might have pick one of those up for the Yeti I just built. |
09-29-2015, 01:24 PM | #3 |
I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew.
Posts: 7,843
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
Must not be available yet, the website shows it but it won't open for this model S420BLHV. Looks like a great deal for $80 bucks? It sure wouldn't hurt to give it a try. |
09-29-2015, 01:33 PM | #4 |
Rock Crawler Join Date: Apr 2008 Location: Wrightsville, PA
Posts: 627
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79 |
09-29-2015, 01:41 PM | #5 | |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79 Quote:
| |
09-29-2015, 01:51 PM | #6 |
I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew.
Posts: 7,843
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
I went to ProModeler's site .. thanks.
|
09-29-2015, 02:02 PM | #7 |
I wanna be Dave Join Date: Dec 2006 Location: Where the sheep run scared.
Posts: 3,008
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
Good find Cory!
|
09-29-2015, 02:30 PM | #8 |
Rock Crawler Join Date: Jan 2012 Location: middle TN
Posts: 612
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
Very nice indeed. Sgil2001 please keep us updated on the purchase.
|
10-03-2015, 03:22 PM | #9 |
Rock Crawler Join Date: Apr 2008 Location: Wrightsville, PA
Posts: 627
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
Got mine today. Very beefy looking servo. Need to do some testing later tonight or tomorrow. Overall first impression |
10-08-2015, 12:02 PM | #10 |
Pebble Pounder Join Date: Oct 2014 Location: Santa Barbara
Posts: 179
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79 |
10-10-2015, 10:11 PM | #11 |
Quarry Creeper Join Date: Mar 2009 Location: Central WA
Posts: 354
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
Curious about these servos as well. They look extremely beefy and are well priced.
|
10-11-2015, 01:17 AM | #12 |
I wanna be Dave Join Date: Jun 2013 Location: Ramona, CA
Posts: 2,178
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79 |
10-11-2015, 07:51 PM | #13 |
Try to Bend it Join Date: Aug 2009 Location: Perth Australia
Posts: 3,163
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
X3 Update please
|
10-12-2015, 06:19 PM | #14 |
Pebble Pounder Join Date: Sep 2015 Location: Australia
Posts: 105
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
This is version 2 vs version 3. The pics above are version 1! This thing is bad ass. Last edited by Slayso; 10-12-2015 at 06:29 PM. |
10-12-2015, 06:37 PM | #15 |
Rock Crawler Join Date: Jan 2012 Location: middle TN
Posts: 612
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
Im really liking the specs on these. And it appears they keep getting better.
|
10-12-2015, 08:06 PM | #16 |
Quarry Creeper Join Date: Mar 2009 Location: Central WA
Posts: 354
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
What are the dimensions on the V3 and the cost?
|
10-14-2015, 06:11 AM | #17 |
Rock Crawler Join Date: Sep 2011 Location: FNQ Australia
Posts: 681
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
Sounds the goods , hopefully they live up to the hype.
|
10-14-2015, 08:53 AM | #18 |
Rock Crawler Join Date: Nov 2011 Location: Asheville
Posts: 558
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
What's their warranty look like? Sent from my SM-G900V using Tapatalk |
10-14-2015, 09:12 AM | #19 |
~THE SCALE SHOP~ Join Date: Apr 2006 Location: KILLEEN TX
Posts: 10,056
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79
ill be honest i liked the size and price of the V1 and V2 better. realestate for a 1.9 CMS can get pretty tight. |
10-14-2015, 11:47 AM | #20 |
Quarry Creeper Join Date: Mar 2009 Location: Central WA
Posts: 354
| Re: ProModeler Servo: 420oz, billet case, o-ringed, $79 |
ProModeler Servo: 420oz, billet case, o-ringed, $79 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Billet Motorola Droid Razr Case | JFAB | Vendors Miscellaneous | 2 | 01-14-2013 08:24 PM |
Angry Apple Ipod billet case | motoworx | Vendors Miscellaneous | 31 | 08-15-2012 06:12 PM |
metal gears , billet case , coreless motor servo CHEAP | BL-4x4 | Electronics | 2 | 01-04-2012 09:21 PM |
| |