08-09-2016, 12:55 PM | #1 |
RCC Addict Join Date: May 2015 Location: Price Twp.
Posts: 1,291
| Promodeler V3, nope V4
Well I went to order another V3, and wouldn't you know it, it has been replaced by a V4. From the description... 420oz-in v4 You're looking at our newest S420 servo, the S420v4. While it looks a lot like the S420v3 it replaces, just like a Porsche 911 looks similar year-on-year, our engineers also apply what they've learned to make iterative improvements. For example, in going from v1 to v2 we improved the gear material (from brass to steel because steel wears better). With the introduction of the S420v3 we went to massively larger steel gears (and a finned case for better cooling) because top modelers were abusing servos like nobody else on the planet. Using what we learned results in better servos for everyone. Now, with the S420v4, we've done something else never before seen in aluminum servo cases - hard points. Pressing a harder material (brass inserts) where the steel gear shafts fit the aluminum case enhances durability and results in greater precision, which is important. Can't say I have had any issues with my V3, but I guess progress happens. So its in the mail, when it arrives I'll be taking it apart to check everything is water tight so I'll see if I can get some pictures of the internal changes. |
Sponsored Links | |
08-09-2016, 01:51 PM | #2 |
I wanna be Dave Join Date: Aug 2004 Location: central VT
Posts: 2,300
| Re: Promodeler V3, nope V4
Go figure, I just ordered a V3 last week. I'm already running a V2 without issue.
|
01-19-2017, 04:03 AM | #3 |
Quarry Creeper Join Date: Jul 2009 Location: Long Island
Posts: 347
| Re: Promodeler V3, nope V4
V4 is 25 spline output?
|
01-19-2017, 04:37 AM | #4 |
I wanna be Dave Join Date: Aug 2004 Location: central VT
Posts: 2,300
| Re: Promodeler V3, nope V4
Yup, 25 spline. Since this is up it's worth noting that even though I ordered a v3, I received a v4 those months ago. John even sought me out on here to let me know that. Now I've got a year old gen 2, and a couple gen 4s. All funtioning flawlessly, which is saying alot since I seem to destroy most servos. Only complaint is I want a couple more, but there out of stock. |
01-19-2017, 09:10 AM | #5 | |
I wanna be Dave Join Date: Jun 2013 Location: Ramona, CA
Posts: 2,178
| Re: Promodeler V3, nope V4 Quote:
| |
01-19-2017, 09:13 AM | #6 |
I wanna be Dave Join Date: Aug 2004 Location: Tri-cities, WA
Posts: 4,831
| Re: Promodeler V3, nope V4 |
01-19-2017, 09:30 AM | #7 |
I wanna be Dave Join Date: Jun 2013 Location: Ramona, CA
Posts: 2,178
| Re: Promodeler V3, nope V4 |
01-19-2017, 09:47 AM | #8 |
I wanna be Dave Join Date: Jun 2016 Location: Austin
Posts: 6,013
| Re: Promodeler V3, nope V4
My old link to the v4 now shows v6 is call for availability...
|
01-19-2017, 10:49 AM | #9 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
| Re: Promodeler V3, nope V4 |
01-19-2017, 11:13 AM | #10 |
Rock Crawler Join Date: Jun 2011 Location: Tifton
Posts: 590
| Re: Promodeler V3, nope V4
They have a new Site also. Just Promodeler.com now |
01-19-2017, 11:31 AM | #11 |
I wanna be Dave Join Date: Aug 2004 Location: central VT
Posts: 2,300
| Re: Promodeler V3, nope V4
I pm'd john himself about availibility of the v4 a few days ago as I have a build that needs a servo (don't we all though). Without going into technical/business reasons, which he asked politely that I not share, It's looking like mid february will be the next batch of v4's. I shall wait patiently till then rather than purchase either an inferior, or much more expensive, servo since the ones I already have work flawlessly. Just the other day I bent a vanquish steering arm and ripped apart an rpm revo type rod end with the oldest gen 2 during a collision with an icy snow bank. I could make a pile with all the broken front end parts that v2 has outlasted. It's like that old snap on hammer that you take for granted how many things it has reshapen or broken in its life. I too have pestered john about making a 650 oz/in servo. He currently feels that the market is too small, and the end result too expensive at $150+ to make it worth the hassle to design and build such a servo. He didn't say it would never happen though, so if you too dream of a bombproof 650 oz/in servo then let john hear about it. If we show enough interest then it may eventually happen. |
01-19-2017, 11:50 AM | #12 |
Rock Crawler Join Date: Aug 2015 Location: Big Island
Posts: 863
| Re: Promodeler V3, nope V4 His past updates have all been improvements to the design and hopefully that will continue. I've also seen typos and errant pages on his sites so we probably shouldn't read too much into an updated version number on an old link.
|
01-19-2017, 01:17 PM | #13 |
I wanna be Dave Join Date: May 2015 Location: Moving
Posts: 2,580
| Re: Promodeler V3, nope V4
I'm ready to order my 4th promodeler servo. Hope he gets them built soon. I've got a friend that's ready to order one too after seeing how well mine are doing.
|
01-19-2017, 01:46 PM | #14 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: Promodeler V3, nope V4 |
01-19-2017, 01:55 PM | #15 |
Rock Crawler Join Date: Feb 2010 Location: Central/SE Ohio
Posts: 522
| Re: Promodeler V3, nope V4 Yup, I have one in my wraith, bomber and scx10ii. All are great. Would like a little more torque but their durability greatly outweighs that.
|
01-19-2017, 02:43 PM | #16 | |
I wanna be Dave Join Date: Jun 2013 Location: Ramona, CA
Posts: 2,178
| Re: Promodeler V3, nope V4 Quote:
| |
01-19-2017, 03:11 PM | #17 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
| Re: Promodeler V3, nope V4 |
01-19-2017, 03:14 PM | #18 |
I wanna be Dave Join Date: Jun 2016 Location: Deep in the Everglades
Posts: 5,818
| Re: Promodeler V3, nope V4 |
01-19-2017, 03:52 PM | #19 |
Moderator Join Date: Sep 2008 Location: PA
Posts: 13,935
| Re: Promodeler V3, nope V4 |
01-19-2017, 04:18 PM | #20 |
I wanna be Dave Join Date: Aug 2004 Location: central VT
Posts: 2,300
| Re: Promodeler V3, nope V4
That slot is for the potentiometer drive. There is literally no torque on that part. All the load goes through the bearings, which aren't shown in that pic.
|
Promodeler V3, nope V4 - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ProModeler Servo: 420oz, billet case, o-ringed, $79 | STANG KILLA SS | Electronics | 711 | 01-03-2020 03:00 PM |
| |