|
| LinkBack | Thread Tools | Display Modes |
08-03-2020, 10:43 AM | #1 |
Rock Stacker Join Date: Feb 2010 Location: Topeka
Posts: 82
| STRC Steering Knuckle fitment issue
As the title basically says, my strc brass steering knuckles will not slide over the IFS control arm mounts. Is the IFS that different from the solid axle? I was under the impression they were the same steering knuckle. Anyone else have fitment issues from strc? Should I try to drill out the knuckle so they slide in or did I just get a bad batch? Neither side fits btw Sent from my LM-G820 using Tapatalk |
Sponsored Links | |
08-03-2020, 12:39 PM | #2 |
Rock Stacker Join Date: Dec 2011 Location: Venice
Posts: 89
| Re: STRC Steering Knuckle fitment issue
When i built my IFS rig with SSD brass knuckles they didnt fit either, I took a bit of sand paper in a drill and "honed out" the knucles them sevles. I've seen other people put the ball studs in a drill with some sand paper took a bit of material off the stud while it was spinning. Im pretty sure this is a common thing for whatever reason. |
08-03-2020, 12:44 PM | #3 |
Rock Stacker Join Date: Feb 2010 Location: Topeka
Posts: 82
| Re: STRC Steering Knuckle fitment issue
Thank you. I'll try that when I get home. Bit of a bummer but oh well lol Sent from my LM-G820 using Tapatalk |
08-03-2020, 02:37 PM | #4 |
I wanna be Dave Join Date: Jun 2017 Location: Humboldt county
Posts: 4,482
| Re: STRC Steering Knuckle fitment issue
I had to drill out my SSD knuckles. Its due to the ball stud being larger for the IFS kit. I think its a metric size in case you have metric drill bits. At least its an easy fix and we're fortunate enough that this doesnt require an entirely new part. |
08-03-2020, 02:53 PM | #5 | |
Rock Stacker Join Date: Feb 2010 Location: Topeka
Posts: 82
| Re: STRC Steering Knuckle fitment issue Quote:
Sent from my LM-G820 using Tapatalk | |
STRC Steering Knuckle fitment issue - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Raw kit Motor fitment issue | Lovetoclown | Axial SCX10 II | 17 | 11-06-2019 08:45 PM |
STRC rear lockouts fitment issue | 1967Typhoon | Axial SCX-10 | 13 | 09-08-2016 08:25 PM |
Skid and lower rails fitment issue? | 84yoda | Axial RR10 Bomber | 5 | 01-13-2016 09:56 PM |
Vanquish scale knuckle & steering issue | kowalski22 | Axial Wraith | 39 | 03-02-2015 09:20 PM |
FYI- Golden Horizon beats STRC on fitment | it8ezbngrn | Axial Wraith | 0 | 06-03-2013 01:00 AM |
| |