RCCrawler Forums

eclipse9 · 01-22-2010, 09:52 PM

hey guys im just wondering how much peoples 2.2 crawlers weigh?i have a 2.2 tuber and it weighs 7.7 lbs. im just interested in knowing what you guys run

legion1capone · 01-22-2010, 10:15 PM

My venom creeper weighs in at 6lbs 11oz.

shelljeep · 01-23-2010, 12:51 AM

How much of that is tire ballast?
Good Thread, would be cool to know what people's front/rear bias is also.
My LNC weighs in at 5# 5oz. That's with a 6000 mAh Lipo weighing around 11oz and 9 oz per front/zero rear.
Bias is 3# 5 oz front and 2# rear, 62/38. Basically stock, just swapped servo, motor, and weighted tires.

GB's 05 · 01-23-2010, 03:01 AM

Not having weighed my creeper I'm not positive, but I'd say 7+#'s. Seeing how much weight I use and the creeper weighing 5+#'s stock she's a pig.

silentcircus · 01-23-2010, 09:44 AM

My LCC is 6 lbs. and 10 oz. with VP DH ProComps (fully weighted) in front and VP SLW V4s in the back. I have the 3S lipo in the ESC tray and the ESC in the battery tray for a 60/40 weight bias.

wrightcs77 · 01-23-2010, 04:02 PM

LCC is 5 lbs 15 oz. Each front tire (tire, foam, rim) is 15 oz, each rear is 7.75 oz. All screws on the chassis are now light aluminum to save weight up high.

Stormin2u · 01-23-2010, 04:11 PM

My Axial based 2.2 comp rig is 6 lbs 2 oz.

bustedcrawler · 01-23-2010, 04:23 PM

Losi Comp Crawler....5lbs 12oz ish, need to reweigh it again. VP DH's full up front, VP SLW V2s out back, and close slightly over 60/40 weight basis. Enough that my balance point is forward of the skid.

Manning · 01-23-2010, 04:40 PM

My axial is 6 lbs 2 oz or so, and each front tire/wheel assembly is about 15 oz each.

Most comp rigs are in the 6 lb range.

Dennis P · 01-23-2010, 05:28 PM

Hello guys my Berge V1 Beetle Juice crawler is 96oz or 6.0 pounds with 3s lipo installed.I have 56oz on the frt wheels and 40oz on the rear.I have done no gringing or drilling of my axles.It could be lighter ,but so could I.

crawlinghulls · 01-23-2010, 05:47 PM

My Bully is right around 6.5 lbs. I should be able to get it to around 6.25

eclipse9 · 01-23-2010, 06:40 PM

mine is the heaviest so far ...maybe i should shed some weight off it:?

oldhippie · 01-23-2010, 07:38 PM

My comp rig is right at 5lb. My V2 berg is at 5.6lb.

eclipse9 · 01-23-2010, 08:06 PM

wow ive got myself a pig of a comp crawler lol

hotbodies racer · 01-24-2010, 07:24 PM

my losi weighs 6,pounds with a 4-cell and 12oz in each front, none in rear.

liverkiller1 · 01-25-2010, 10:16 PM

mines a swish below 7lbs

dickwart · 01-25-2010, 11:40 PM

My ax10 is 5.5lbs w/out wheel weights... I run it around 6...

catpwred · 01-26-2010, 12:00 AM

my bully is 6.3 lbs with 3oz in each front tire but i have lite cases in the rear so really i'm about 1lb heavier in the front

ol' gravy leg · 01-26-2010, 07:27 AM

my berg is 5.5lbs rtr

The Violator · 01-26-2010, 07:28 AM

My Beetlejuice bergis a flat 6 pounds even with 12 oz in the 2 front wheels.

01-22-2010, 09:52 PM	#1
eclipse9 Pebble Pounder Join Date: Dec 2008 Location: hercules Posts: 124	2.2 crawler weight hey guys im just wondering how much peoples 2.2 crawlers weigh?i have a 2.2 tuber and it weighs 7.7 lbs. im just interested in knowing what you guys run

01-23-2010, 04:11 PM	#7
Stormin2u I wanna be Dave Join Date: May 2007 Location: Taylors Falls just hanging with the MNRCRC crew. Posts: 7,843	My Axial based 2.2 comp rig is 6 lbs 2 oz. Last edited by Stormin2u; 02-08-2010 at 06:49 PM.

01-23-2010, 05:28 PM	#10
Dennis P Pebble Pounder Join Date: Dec 2008 Location: Alberta Canada Posts: 177	weigh Hello guys my Berge V1 Beetle Juice crawler is 96oz or 6.0 pounds with 3s lipo installed.I have 56oz on the frt wheels and 40oz on the rear.I have done no gringing or drilling of my axles.It could be lighter ,but so could I.

01-22-2010, 10:15 PM	#2
legion1capone Quarry Creeper Join Date: Feb 2009 Location: Tucson, AZ Posts: 453	My venom creeper weighs in at 6lbs 11oz.

01-23-2010, 12:51 AM	#3
shelljeep RCC Addict Join Date: Jan 2010 Location: Lafayette Posts: 1,077	How much of that is tire ballast? Good Thread, would be cool to know what people's front/rear bias is also. My LNC weighs in at 5# 5oz. That's with a 6000 mAh Lipo weighing around 11oz and 9 oz per front/zero rear. Bias is 3# 5 oz front and 2# rear, 62/38. Basically stock, just swapped servo, motor, and weighted tires.

01-23-2010, 03:01 AM	#4
GB's 05 Quarry Creeper Join Date: Oct 2009 Location: Indiana Posts: 235	Not having weighed my creeper I'm not positive, but I'd say 7+#'s. Seeing how much weight I use and the creeper weighing 5+#'s stock she's a pig.

01-23-2010, 09:44 AM	#5
silentcircus Rock Crawler Join Date: Sep 2009 Location: My Old Kentucky Home.... Posts: 659	My LCC is 6 lbs. and 10 oz. with VP DH ProComps (fully weighted) in front and VP SLW V4s in the back. I have the 3S lipo in the ESC tray and the ESC in the battery tray for a 60/40 weight bias.

01-23-2010, 04:02 PM	#6
wrightcs77 RCC Addict Join Date: Feb 2005 Location: Minneapolis Posts: 1,496	LCC is 5 lbs 15 oz. Each front tire (tire, foam, rim) is 15 oz, each rear is 7.75 oz. All screws on the chassis are now light aluminum to save weight up high.

01-23-2010, 04:23 PM	#8
bustedcrawler RCC Addict Join Date: Apr 2004 Location: 5280 Posts: 999	Losi Comp Crawler....5lbs 12oz ish, need to reweigh it again. VP DH's full up front, VP SLW V2s out back, and close slightly over 60/40 weight basis. Enough that my balance point is forward of the skid.

01-23-2010, 04:40 PM	#9
Manning RCC Addict Join Date: Nov 2006 Location: Lowell, Arkansas Posts: 1,307	My axial is 6 lbs 2 oz or so, and each front tire/wheel assembly is about 15 oz each. Most comp rigs are in the 6 lb range.

01-23-2010, 05:47 PM	#11
crawlinghulls Rock Crawler Join Date: May 2007 Location: Norwich Posts: 920	My Bully is right around 6.5 lbs. I should be able to get it to around 6.25

01-23-2010, 06:40 PM	#12
eclipse9 Pebble Pounder Join Date: Dec 2008 Location: hercules Posts: 124	mine is the heaviest so far ...maybe i should shed some weight off it:?

01-23-2010, 07:38 PM	#13
oldhippie I wanna be Dave Join Date: Feb 2009 Location: 20 miles southeeast of downtown Sacramento Posts: 2,373	My comp rig is right at 5lb. My V2 berg is at 5.6lb.

Sponsored Links

01-23-2010, 08:06 PM	#14
eclipse9 Pebble Pounder Join Date: Dec 2008 Location: hercules Posts: 124	wow ive got myself a pig of a comp crawler lol

01-24-2010, 07:24 PM	#15
hotbodies racer Rock Stacker Join Date: Dec 2009 Location: stockport ohio Posts: 70	my losi weighs 6,pounds with a 4-cell and 12oz in each front, none in rear.

01-25-2010, 10:16 PM	#16
liverkiller1 Rock Crawler Join Date: Dec 2009 Location: Lynnwood Posts: 569	mines a swish below 7lbs

01-25-2010, 11:40 PM	#17
dickwart Rock Crawler Join Date: Apr 2006 Location: Thorp WA, more sheep than men... Posts: 543	My ax10 is 5.5lbs w/out wheel weights... I run it around 6...

01-26-2010, 12:00 AM	#18
catpwred Quarry Creeper Join Date: Mar 2009 Location: fair oaks ca Posts: 439	my bully is 6.3 lbs with 3oz in each front tire but i have lite cases in the rear so really i'm about 1lb heavier in the front

01-26-2010, 07:27 AM	#19
ol' gravy leg Rock Crawler Join Date: Feb 2009 Location: Chandler, AZ Posts: 784	my berg is 5.5lbs rtr

01-26-2010, 07:28 AM	#20
The Violator RCC Addict Join Date: Apr 2009 Location: Token's life matters Posts: 1,836	My Beetlejuice bergis a flat 6 pounds even with 12 oz in the 2 front wheels.

RCCrawler Forums

Thread: 2.2 crawler weight