Carter Fab & Machine Custom Scaler Axle Housings

[CarterFab]

Originally Posted by BigSki

So this is basically the same width as a XR modded AX-10 axle?

Don't have any experience with those, but if they use short side XR rear shafts, then yes.

[blackcruzer]

That Wraith hybrid axle didn't last long on your website. How much more would it be to have one with the hidden hardwares and no lockout?

[CarterFab]

Originally Posted by blackcruzer

That Wraith hybrid axle didn't last long on your website. How much more would it be to have one with the hidden hardwares and no lockout?

A hybrid would be $92 bare.
All aluminum is $150 bare.

I'll have another hybrid like the one above probably tomorrow.

[blackcruzer]

Originally Posted by CarterFab

A hybrid would be $92 bare.
All aluminum is $150 bare.

I'll have another hybrid like the one above probably tomorrow.

OK, I'll get back to you first week of Dec.

[blackcruzer]

I saw your post on FB this morning, I'll wait til after the Holidays. This way we can talk about doing the front/rear axles.

Thank You,

Jeff

[CarterFab]

Originally Posted by blackcruzer

I saw your post on FB this morning, I'll wait til after the Holidays. This way we can talk about doing the front/rear axles.

Thank You,

Jeff

We are just slammed busy and meeting some deadlines is gonna prove difficult with the holidays and school schedule for the kiddos changing over the next month. Just don't want to rake on too much and not be able to fulfill jobs.

[BigSki]

Originally Posted by CarterFab

Don't have any experience with those, but if they use short side XR rear shafts, then yes.

I think they use the long XR 10 ale shafts. It's the 'long beef tube' mod for the AX-10 housings.

[fordsuperduty]

Originally Posted by CarterFab

Customer wanted a setup like we built for Showcase but w/a suck down winch to hide the servo. Showcase's setup With winch We started with a VP housing as usual then machined a new long side steel tube. Used a Dinky Rc "s" link again and proceeded with chromoly tube to build the winch mount and skid

Is this a stock wraith width axle or a narrowed version.

Sent from my iPhone in the shop

[CarterFab]

Originally Posted by fordsuperduty

Is this a stock wraith width axle or a narrowed version.

Sent from my iPhone in the shop

Stock width

[fordsuperduty]

Thanks man

Sent from my iPhone in the shop

[yusof]

PLS PM me the price for this axle set up.

Originally Posted by CarterFab

Finished product.
Attachment 257797
Attachment 257798
Attachment 257799
Attachment 257800
Attachment 257801

[blackcruzer]

Have you started work on Harley's axles yet? Please don't forget to post them here, I (we all) wanna see.

[CarterFab]

Originally Posted by blackcruzer

Have you started work on Harley's axles yet? Please don't forget to post them here, I (we all) wanna see.

Waiting on parts from VP still.

[kaneohecrawler]

Yall should see what he whipping up for me. Belive me... youll wanna see. gonna be sick!

[offroadjeepin]

What axle shafts does center wraith use?

[dezertmobber]

I like those 9's with the black widow center section, do you think the axles would be able to handle mamba monster power? I only ran the velineon on my last truck and went through axles, I was using the wraith rear axle on that truck. was hoping to find an axle/ housing combo with wraith width and link mounting dimensions that would be able to handle the mamba monster with this truck... really like your work man! let me know what you think, any info is helpful!

[CarterFab]

Originally Posted by offroadjeepin

What axle shafts does center wraith use?

Shafts made specifically for it.

[CarterFab]

Not sure on strength. You can definitely build a Wraith style housing to withstand the anise though. Just takes a little money.

[dezertmobber]

pm me a round about price on a center diff super 9 with wraith link mounting dimensions and width... those axles looks pretty beefy

[CBR74]

Beautiful work. Contacted you through your website about a custom set.