Dynamic Concepts... Anyone Heard...

[jrkilburn]

Glad to see you back! My order still stands if you get to my PM.

[Farmer]

Super happy to see you back!!!
Later,
Farmer

[Jcplante]

Put a zj body on the list. I know a few guys that have been looking for one but it just doesn't exist yet.

[SSD]

Any chance you can start using 3 piece moulds so the body (front and rear) does not have to be separate pieces?

[Dynamic Concepts]

Originally Posted by Rpp Hobby

Good to see you back

Thank you Corey. You are the first one I reached out to the other day. I am working diligently to fill your order.

Originally Posted by STANG KILLA SS

x2! get ready for the orders to explode Kurt!

I hope so, as I plan on expanding the business. But, it is my job to ensure the community that I won't walk away again.

Originally Posted by jrkilburn

Glad to see you back! My order still stands if you get to my PM.

I will look for it, and reply to you. Than you for the patience.

Originally Posted by Farmer

Super happy to see you back!!!
Later,
Farmer

Thank you. I am very glad to be back.

Originally Posted by Jcplante

Put a zj body on the list. I know a few guys that have been looking for one but it just doesn't exist yet.

I now have 2 young protege's I hope to groom into the business. It will add another dimension beyond asking the community what they want to see. Jeeps are popular worldwide, so I don't forsee ignoring them.

Originally Posted by SSD

Any chance you can start using 3 piece moulds so the body (front and rear) does not have to be separate pieces?

Currently, I design and manufacture the body panel sets in 4 pieces for a few reasons; I can add undercut detail that would otherwise be impossible to de-mold, and to make the pieces stronger overall. However, I will look at other design strategies, because eliminating some trimming would be nice for the consumer.

[SSD]

I think with 3 piece molds where the middle piece drops out first you can achieve under cuts and have a one piece body (but I'm no expert, I'm sure you know better than me).
The downside is the diagonal mold lines that you see on Tamiya bodies. Maybe you can split the molds along shut lines in the design to avoid this problem.

I like what you do so it would be great to see your bodies the best they can be.

[LoneRanger]

I hate to "assume", but I would think that you would fill the orders that were paid through ebay such as myself?

glad to see that your doing ok~

http://youtu.be/AsfKsp951oY

L.R.

[WesTX]

Sent you a PM, glad you are back and safe and sound.

[Dynamic Concepts]

Originally Posted by SSD

I think with 3 piece molds where the middle piece drops out first you can achieve under cuts and have a one piece body (but I'm no expert, I'm sure you know better than me).
The downside is the diagonal mold lines that you see on Tamiya bodies. Maybe you can split the molds along shut lines in the design to avoid this problem.

I like what you do so it would be great to see your bodies the best they can be.

Our 1-piece bobbed Bronco has a diagonal part line, from a required slide. That aids in getting the part off the mold, but doesn't rectify the material thinning issue. That's why we had to upgauge that body from .040" to .060".

Originally Posted by LoneRanger

I hate to "assume", but I would think that you would fill the orders that were paid through ebay such as myself?

glad to see that your doing ok~

http://youtu.be/AsfKsp951oY

L.R.

Yes, I am working on rectifying my Ebay debacle right now this morning, including filling your order. I should have cancelled those auctions, and told the rcc community I was going to take a week ( or 12 ) off. That was my mistake, and I don't make any assumptions that there aren't repercussions from my stupidity.

Originally Posted by WesTX

Sent you a PM, glad you are back and safe and sound.

Thanks Wes. Back to the orders....

[silvercrxsir]

Glad to see you are ok, I would like to order a rubi body, but I know you have a lot of catching up to do, when would be a good time to make an order

[Dynamic Concepts]

Originally Posted by silvercrxsir

Glad to see you are ok, I would like to order a rubi body, but I know you have a lot of catching up to do, when would be a good time to make an order

A few more days should allow me to be caught up. I am personally taking care of the past-due orders.
I am having one of my helpers box up a few Rubis, so I may be able to get to your order quicker.

[silvercrxsir]

I was wondering what the possibilities are of you producing a proper toyota style bed or besides for the axial honcho body, there is a huge demand for them

[fr8cture]

Well I ordered a rubi body on the 4th and he told me it was shipped but it still hasn't showed and I'm one state away. Tracking still says pre shipment....not sure whats going on. tried to contact him...

[LoneRanger]

Getting caught up often takes more than just a few days-
Let us know how your body is when you receive it. I am looking forward to having a pinched narrowed bronco buggy in my fleet again.

L.R.

[fr8cture]

Yeah well shouldn't have told me he shipped it then. Hasn't been on since the 4th either..also said he had plenty in stock of the rubi shell.

[johnnyh66]

Originally Posted by johnnyh66

Put me on the list for an EB!

I'm eager but waiting till older orders are filled...

[LoneRanger]

Bump, any new news?

L.R.

[fr8cture]

nope no way to contact him. Hasn't been on since the 4th...

[KBR97]

Has anyone had an order filled or a refund since he came back? Somebody on the forum has to know him personally?
Go bang on his door...

[fr8cture]

Negative