RCCrawler Forums

Project_TLT · 01-09-2007, 10:28 PM

how do you guys make those chassis? well i have an idea i just want two rails and a center, but i want to know what you make the rails out off and where to get it. also do u use an angle grinder or what?

toyofast · 01-09-2007, 10:33 PM

MFM Racing makes the best(IMO) scale chassis. Easy to setup, easy to make many different adjustments and great price. Nearly every rig in the ORCRC scale class runs a MFM Racing scale chassis.

http://mfmracing.com/

They now have a black anodized chassis. I got to see it at Sunday's comp, very nice. I need to get a black anodized one just because it's so nice!

Xtant3150c · 01-09-2007, 10:58 PM

Most chassis I have seen used c-channel aluminum. You can find it at your local hardware store, Home Depot or Lowes.

I tried my hand at building one. Was'nt to bad and I had to use all hand tools.

I now have a K2-3L chassis!!! ;) Nice chassis!

That mfmracing chassis is a nice setup.

Badd · 01-09-2007, 11:18 PM

the frame under this rig is out of 1/2 square tubing . the bends where cut welded back together to get the shape . then ripped down the middle to get each side .

more on the build here Badd's "All Jacked Up" High Lift Build

Unimoger · 01-10-2007, 10:37 AM

Ladder frame, c-channel scale chassis?

BB-51 , www.montanascaledesigns.com

k9popo · 01-10-2007, 11:11 AM

Quote:

Originally Posted by Unimoger

Ladder frame, c-channel scale chassis?

BB-51 , www.montanascaledesigns.com

Hehe a shameless plug

...

badger · 01-10-2007, 11:15 AM

Quote:

Originally Posted by toyofast

MFM Racing makes the best(IMO) scale chassis. Easy to setup, easy to make many different adjustments and great price. Nearly every rig in the ORCRC scale class runs a MFM Racing scale chassis.

http://mfmracing.com/

They now have a black anodized chassis. I got to see it at Sunday's comp, very nice. I need to get a black anodized one just because it's so nice!

Quote:

Originally Posted by k9popo

Hehe a shameless plug

...

And this wasn't? ^^^

k9popo · 01-10-2007, 11:26 AM

Quote:

Originally Posted by badger

And this wasn't? ^^^

My Bad

...Sorry Badger dude

"I will read entire thread before I post up" "I will read entire thread before I post up""I will read entire thread before I post up" "I will read entire thread before I post up""I will read entire thread before I post up" "I will read entire thread before I post up""I will read entire thread before I post up" "I will read entire thread before I post up""I will read entire thread before I post up" "I will read entire thread before I post up""I will read entire thread before I post up" "I will read entire thread before I post up""I will read entire thread before I post up" "I will read entire thread before I post up""I will read entire thread before I post up" "I will read entire thread before I post up"

How many more times

..

perfictsib · 01-10-2007, 12:44 PM

If you are good with tools and you got access to them you should be able to make your own chasis you dont need a welder to build it,
theres plenty of builds on here to help and advertised for sale.

below is a link to the one i built (the first cut c section of them all i think) lol.

looneybin · 01-10-2007, 01:46 PM

hell i have very little tools and i stil came up with something.

i used 1/2 in square steel tube, filled it with sand, bent it between the bars of an old campground grill, and the cut it in half with a HACKSAW.

obijuan · 01-10-2007, 05:35 PM

with a hacksaw!?! what did that take you like three days?? wow.

madhatter · 01-10-2007, 05:58 PM

A grinder,Drill and 10ga steel. And once the photo hoster will load again I'll post a pic

looneybin · 01-10-2007, 06:58 PM

ha ha thats what everyone asks. it took less than 5 mins with a brand new blade. took longer to figure out how in the hell to hold it still and cut straight.

01-09-2007, 10:28 PM	#1
Project_TLT Newbie Join Date: Oct 2006 Location: Denver Posts: 40	Ladder chassis how do you guys make those chassis? well i have an idea i just want two rails and a center, but i want to know what you make the rails out off and where to get it. also do u use an angle grinder or what?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-09-2007, 10:33 PM	#2
toyofast I wanna be Dave Join Date: Feb 2004 Location: Columbia Gorge Posts: 5,512	MFM Racing makes the best(IMO) scale chassis. Easy to setup, easy to make many different adjustments and great price. Nearly every rig in the ORCRC scale class runs a MFM Racing scale chassis. http://mfmracing.com/ They now have a black anodized chassis. I got to see it at Sunday's comp, very nice. I need to get a black anodized one just because it's so nice!

01-09-2007, 10:58 PM	#3
Xtant3150c RCC Addict Join Date: Apr 2006 Location: On Da' Shelf Posts: 1,253	Most chassis I have seen used c-channel aluminum. You can find it at your local hardware store, Home Depot or Lowes. I tried my hand at building one. Was'nt to bad and I had to use all hand tools. I now have a K2-3L chassis!!! ;) Nice chassis! That mfmracing chassis is a nice setup.

01-09-2007, 11:18 PM	#4
Badd I wanna be Dave Join Date: Sep 2005 Location: Dirty South Posts: 4,064	the frame under this rig is out of 1/2 square tubing . the bends where cut welded back together to get the shape . then ripped down the middle to get each side . more on the build here Badd's "All Jacked Up" High Lift Build

01-10-2007, 10:37 AM	#5
Unimoger I wanna be Dave Join Date: Aug 2005 Location: G6'N Posts: 7,391	Ladder frame, c-channel scale chassis? BB-51 , www.montanascaledesigns.com

01-10-2007, 12:44 PM	#9
perfictsib Quarry Creeper Join Date: Jan 2005 Location: uk s,wales blackwood Posts: 449	If you are good with tools and you got access to them you should be able to make your own chasis you dont need a welder to build it, theres plenty of builds on here to help and advertised for sale. below is a link to the one i built (the first cut c section of them all i think) lol.

01-10-2007, 01:46 PM	#10
looneybin RCC Addict Join Date: Jul 2006 Location: Johnston SC Posts: 1,562	hell i have very little tools and i stil came up with something. i used 1/2 in square steel tube, filled it with sand, bent it between the bars of an old campground grill, and the cut it in half with a HACKSAW.

01-10-2007, 05:35 PM	#11
obijuan I had the hottest girlfriend at the MSD Nats Join Date: Dec 2006 Location: Hecho en Tejas Posts: 2,399	with a hacksaw!?! what did that take you like three days?? wow.

01-10-2007, 05:58 PM	#12
madhatter Quarry Creeper Join Date: Sep 2005 Location: Lethbridge Posts: 421	A grinder,Drill and 10ga steel. And once the photo hoster will load again I'll post a pic

01-10-2007, 06:58 PM	#13
looneybin RCC Addict Join Date: Jul 2006 Location: Johnston SC Posts: 1,562	ha ha thats what everyone asks. it took less than 5 mins with a brand new blade. took longer to figure out how in the hell to hold it still and cut straight.

Sponsored Links

RCCrawler Forums

Thread: Ladder chassis