I will change the status to completed when it ships. What order number?



You should hit up cheapbatterypacks.com and they can build you one faster than I, for the same price or better. $39.50 would be my price. I won't have enough time to build a pack for another 5 days, and I just ran out of loose cells today (unless you wanted IB1400).

[quote=JohnRobHolmes;992099]I will change the status to completed when it ships. What order number?
Its says 1000 on the invoice.

I sent you an email regarding it. You wanted tamiya plugs.

email and PP sent! Thanks JRH!

Is there a phone number I can call to place a phone order? I had a few questions I wanted to ask as well. Lemme know I wanted to call and place a order tomorrow if possible.

John, I'm trying to figure out what packs will fit on the axles I'm building. I noticed that both lipo packs you offer are listed with the same dimensions. For which pack are the dimensions correct?

I have a fully charged lipo that i didn't end up using when we went crawling today. Can i leave it fully charged till next time or should it be discharged? thx. joe

I don't have a phone number available for ordering at this time, sorry.

Very good catch, thank you. The dimensions were for the 1300 pack, so I have updated the 2100 pack.


Yep, you can just leave it charged as long as it doesn't sit for more than a few weeks. If it is going to sit for a prolonged period it should be discharged to about 7.4v with no load.

paypal
 

I placed an order today and the payment never showed up in my paypal. What do I do. I placed the order without my rccrawler logon.

Shrink wrap.
 

John, can you get or do you have black shrink wrap to fit your 8 cell saddle packs?
If you don't have any and don't plan on stocking can you suggest some one?

Thanks,
Hawk

You have PM

I don't have any, but I will keep a lookout from suppliers. CBP might have some. It is hard to find shrinkwrap in the colors I want it seems.

I want some of those ---- 4mm Long gold plugs #84---- (3 sets at least)

To solder to all my motors for easy hookup to my mm.

Got any on the way or in the back?

Thanks for the heads up, I do have some in stock now and they are on the site.

Hawk here, who is "CBP" and what is their address?

Thanks,
Hawk

cheapbatterypacks.com sir

John,

I am an electronics moron. Need your help.
I will be running on my super:
Two Mamba Max's
Two Hitec 5945 Servo's
Futaba Four Channel Stick Radio
Two Integy 55t Lathes

Do I need a Voltage Regulator or a BEC?
I do not know the difference.

Thanks, Brian.

A voltage regulator is a BEC, same thing. What main pack voltage do you plan to use?

Just running 6 cell 1500 2/3A NIMH packs or should I run a bigger 6 or 7 cell Stick Pack for comps?

John I need help my quark just went all crazy on me. I just went to plug it in and drive it a little before the weekend comp. As soon as I pluged it in radio on first switch on controller on. The thing flashes all red and beeps non stop. I have no throttle control and it won't go into the program mode. The steering works fine though.
Any ideas?

Bigger how? I like to run as much voltage as possible in a comp.


That I have never seen. Maybe you are getting no signal to the channel? Try plugging it into your steering channel. Otherwise you will have to give quark a call. Or you might just need to charge your battery. :mrgreen: