Trail Finder 2 Chit-Chat

[sally1800]

[QUOTE=badhoopty;4739689

any rc4wd spring ive ever seen isnt nearly as quality spring steel as the tamiyas.

the rc4wd link you provided is for bruiser/mountaineers. i dont think those will work on axial axles and to get them to work on rc4wd axles you would need ubolts, BUT the ubolts most likely arent threaded high enough to capture that many leafs.[/QUOTE]

I don't plan on running Axial axles. I am running Yota II. I was looking at my Hilux that I have leafs on. It looks to have the single leaf, the one with three holes in them.

I might just take those off and give them a try.

[Guambom]

Need some help on how to turn up the front differential...as it sits the diff angles downward towards the ground with the shaft...I made some spacers that angle to hopefully push the pinion upward but didn't work...any help or replies would be appreciated...!!!

[badhoopty]

Originally Posted by Guambom

Need some help on how to turn up the front differential...as it sits the diff angles downward towards the ground with the shaft...I made some spacers that angle to hopefully push the pinion upward but didn't work...any help or replies would be appreciated...!!!

rc4wd makes degree shims if you are using 3mm screws to bolt your axles to the leafs. sounds like exactly what you might be looking for.

Superlift Driveshaft Alignment Degree Shims