Memorial Day

[KSCrawler]

Greggo, I think I have a spare iron you can use to get your truck going. I'll find it tonight and drop it by tomorrow after work.

[Docwolf]

I got a gun, we can meet at my place, fix your rig then roll out the hill.

Sent from my RM-845_nam_vzw_100 using Board Express

[grob23]

If I don't get one from Billy, I'll hitcha up!

[ElBandito]

I actually have a spare tip for my Weller. I'll let you buy it from me if you need one. I ordered 2 the last time.

Sent from the galaxy

[grob23]

Originally Posted by ElBandito

I actually have a spare tip for my Weller. I'll let you buy it from me if you need one. I ordered 2 the last time.

Sent from the galaxy

got a part number?

[ElBandito]

Finally got my ROC412 in for the Wraith. It's back to being an animal again. I also got the BHR LT4. I'm still on the fence on that esc. I'm gonna have to try one of the other firmware for it.... not too happy with the one it came with. I ended up putting the MMP back in to get it to run smooth. Let me tell you that ROC412 is smooth as butter with the MMP. I would say at least 10% more wheel speed than the Redline 13.5 had. Great drag brake as well. Truly the best of both worlds between brushed and brushless.

The LT4 will be going in the Twin Hammers once I get her all cleaned up. She's a mess from the last outing.

Sent from the galaxy

[Docwolf]

The stock firmware is terrible for crawling. I don't remember the number, but use the latest firm, it gives you all the options and the most configurations.

Sent from my RM-845_nam_vzw_100 using Board Express

[ElBandito]

Originally Posted by Docwolf

The stock firmware is terrible for crawling. I don't remember the number, but use the latest firm, it gives you all the options and the most configurations.

Thanks, I will give it a shot. That ESC is going in the TH.

[Docwolf]

I think you will get some use out of the timing control in the TH, I set mine to come in at 3000RPM and no delay. the idea behind it is to give you a little extra punch towards the top end, but on this crawler master motor there really is no advantage.

[ElBandito]

Originally Posted by grob23

got a part number?

Cheeck this website out. I use the ST3. If you are ordering one, just come and get mine, then you can replace it with the new one when it comes in. That's assuming you are using this iron.

[KSCrawler]

Greg, ill swing by after work and drop off an iron to get ya by til you get a tip.

[grob23]

I got an iron from Billy... I use a different Weller iron, it takes really weird tips...

And now my rig is fully functional. Dirty as all hell (still), but funtional

So are we getting together at Coronado on Sunday or Monday? Time?

[Docwolf]

Sunday@1 calendar was updated;) we can meet there or at my place.

Sent from my RM-845_nam_vzw_100 using Board Express

[ElBandito]

I'm working on Sunday, so I'm headed up Monday early, like 10:00 or so.

Sent from the galaxy

[Docwolf]

If I don't break I could do Monday too.

Sent from my RM-845_nam_vzw_100 using Board Express

[Topekacrawls]

Guys I realized I'm 400 miles overdue for an oil change. It may be best if I give the 1:1 a weekend off.

[Docwolf]

400 is not bad, but you do drive the hell out of that car. LOL

Sent from my RM-845_nam_vzw_100 using Board Express

[grob23]

Let's meet on top of Coronado?

[Docwolf]

Sounds good

Sent from my RM-845_nam_vzw_100 using Board Express

[grob23]

I really hate to do this, cause I said I'd be there and caused a big stink about getting my rig running, but I've gotta back out. I consumed a bit too much alcohol last night, and woke up with the gnarliest hangover I've had in a long time... I still wanna crawl, but not till Tomorrow. I just don't wanna be up there and be a miserable, vomiting, pain in the ass...