Re: Papabash's Team BWD 'Low-Pro' Wedge Build Quote:
LOSB2046 Rear Steering Kit |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build Hey do the bent rod ends do you know if the pillow balls from revo rod ends work in them? Or which ones do? I got a guy that has a bunch of them but he doesn't have the pillow balls. |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build I think the Revo balls are longer from open end to open end. My favorite balls are the ones in the Traxxas #1942 sets, you have to buy a bunch (16 I think) of rod ends with them, but you can always use them later. The whole set is only about $6.50. |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build The stock ones are too small I'm assuming? |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build No, the stock Axial balls are fine, I just prefer the Traxxas balls. I just meant that the Revo balls are too "long" if that makes sense. |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build I think I know what you mean ;) |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build Hey David could you get a shot of it from the top with the body panels on and of your shock and link positions please? |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build Sure, I'll try to do it Sunday night or Monday when I get home. |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build Ok Thanks! |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build Quote:
Pics from the top: https://i.imgur.com/yVK4HOD.jpg https://i.imgur.com/lTaTJ3n.jpg Link and shock positions (rear): https://i.imgur.com/Ri87utO.jpg https://i.imgur.com/E0IK9bd.jpg Link and shock positions (front): https://i.imgur.com/cHP5YF4.jpg https://i.imgur.com/7em4iY4.jpg Upper shock positions: https://i.imgur.com/u2zZ3Pt.jpg Let me know if you need any other pics. |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build That's what I needed I actually mounted them just like yours. |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build you and fallin's builds have def made me want an mrc. those low pros are absolutely sick! |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build Thanks! I see you're from Springfield. You should get one and come comp with us! "thumbsup" |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build Quote:
Quote:
|
Re: Papabash's Team BWD 'Low-Pro' Wedge Build I checked his page, he's from Missouri. Springfield is where our club meets. |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build Quote:
|
Re: Papabash's Team BWD 'Low-Pro' Wedge Build Quote:
But part of what I love about the mini's is the fact that you can buy a used one that is fully comp-ready for around a couple hundred bucks or so if you watch the ads. Try to do that with a 2.2 or Scaler! That is why I have a "few" of them sitting in my shop. :mrgreen: |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build Quote:
|
Re: Papabash's Team BWD 'Low-Pro' Wedge Build looking good Dave, you get your new panels made. if not chop chop get a move on. :mrgreen: |
Re: Papabash's Team BWD 'Low-Pro' Wedge Build Quote:
I definitely need to get busy and get the new panels made, though! |
All times are GMT -6. The time now is 07:51 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com