Re: Papabash's BWD 'Low-Pro' Wedge Build How hard is it to modify the caps? Also do you know of any shocks that will work without modding anything |
Re: Papabash's BWD 'Low-Pro' Wedge Build It's really easy, check out page 2 of this thread, I walk you through it there. I guess the Mini Late Models could be used without modification if they aren't outboarded, but I always outboard my MRC shocks, and the stock MLM mounts will bind pretty badly when outboarded. |
Re: Papabash's BWD 'Low-Pro' Wedge Build Quote:
|
Re: Papabash's BWD 'Low-Pro' Wedge Build Quote:
|
Re: Papabash's BWD 'Low-Pro' Wedge Build Quote:
Quote:
|
Re: Papabash's BWD 'Low-Pro' Wedge Build Quote:
Your favorite person in the whole wide world Austin |
Re: Papabash's BWD 'Low-Pro' Wedge Build [QUOTE=fallin apart;3598481] Quote:
Quote:
Quote:
|
Re: Papabash's BWD 'Low-Pro' Wedge Build [QUOTE=papabash;3598511] Quote:
oh and its fixed. Thank you for your time your favorite, Austin"thumbsup" |
Re: Papabash's BWD 'Low-Pro' Wedge Build Quote:
|
Re: Papabash's BWD 'Low-Pro' Wedge Build Any chance you can measure your shocks for me? I need the extended length and collapsed length. I'm building a low pro right now and have the losi threaded shocks for the mrc so instead of buying another set of shocks I'm just going to cut these ones up. |
Re: Papabash's BWD 'Low-Pro' Wedge Build Quote:
|
Re: Papabash's BWD 'Low-Pro' Wedge Build Quote:
So you ended up going with fuel line instead of the pen springs that were pictured earlier in the thread? |
Re: Papabash's BWD 'Low-Pro' Wedge Build This thing would already be done, but I bought a wraith and have been messing around with it too much. I broke it though, so now I'm going to jump back on this while I'm waiting for parts. |
Re: Papabash's BWD 'Low-Pro' Wedge Build Quote:
|
Re: Papabash's BWD 'Low-Pro' Wedge Build I know Don is always very busy, but do you know if he still makes the motor plate for the mrc, I want one and he has not replied if it is going to be available. Also can you post a pic of how or at least where you mounted the esc and receiver. Space is limited. Thanks again. |
Re: Papabash's BWD 'Low-Pro' Wedge Build Quote:
I'll get some pics of where I mounted stuff later when I can. |
Re: Papabash's BWD 'Low-Pro' Wedge Build Ok thanks and I hope he's well. |
Re: Papabash's BWD 'Low-Pro' Wedge Build Here you go: It was actually a good time to ask for a picture of this as I have it torn down to do some work on it. What I did was tape my ESC (Micro Sidewinder) to the bottom of my receiver (Spektrum SR3100) and then mounted them as a unit to the rear electronics tray that came with the chassis. I was a bit worried that mounting the 2 items together would cause glitching, but so far it has worked flawlessly. http://i576.photobucket.com/albums/s...h/P1050478.jpg http://i576.photobucket.com/albums/s...h/P1050477.jpg http://i576.photobucket.com/albums/s...h/P1050476.jpg |
Re: Papabash's BWD 'Low-Pro' Wedge Build Damn your good and fast, thanks again. |
Re: Papabash's BWD 'Low-Pro' Wedge Build Tight Squeeze :mrgreen: I'm working on getting the motor plates and skids for the Wedge/Low Pro chassis kits back on the shelf ASAP. "thumbsup" |
All times are GMT -6. The time now is 10:36 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com