Re: WPL C14 Quote:
|
Re: WPL C14 Lots of kits arriving with crushed packaging. I was lucky to only have a small crease in the front fender. |
Re: WPL C14 Quote:
|
Re: WPL C14 BG yea |
Re: WPL C14 Quote:
|
Re: WPL C14 So I just got a new C14 in a trade (The tan one). It's a 1st gen kit, so it has the softest tires, a wimpy black gearbox, and plastic ring and pinion. I first started with painting some stuff black like the wheels, frame rails, and toolbox and it looks way better now. I'm probably going to just put the 260 gearbox from my C24 in it when I buy a 2-speed for the 24. |
Re: WPL C14 My driveshafts are beefed up? Its my first one so I wouldnt know. |
Re: WPL C14 Quote:
|
Re: WPL C14 MGMAN I just got the c24, and doing mods already, great trucks, love to see everyones work. |
Re: WPL C14 MGMAN Quote:
|
Re: WPL C14 Prototypes for new trusses, including axle mounted steering. These prototypes are 3D printed to check fitment, but final units will be 16ga steel for strength and a bit of weight... Sorry about the photo quality, I need some PETG that isn't black, lol... https://uploads.tapatalk-cdn.com/202...9fb9cda4ea.jpghttps://uploads.tapatalk-cdn.com/202...221c741a88.jpghttps://uploads.tapatalk-cdn.com/202...f3b0616c3e.jpghttps://uploads.tapatalk-cdn.com/202...f5fee5c9bd.jpg Sent from my SM-G970U using Tapatalk |
Re: WPL C14 New frame to eliminate the front pieces to make room for the axle mounted servo, and added new mounting points for longer shocks... Axle trusses need another revision, lower mounting points didn't quite work the way I expected, but should be a pretty easy fix... https://uploads.tapatalk-cdn.com/202...7e210d3dc2.jpghttps://uploads.tapatalk-cdn.com/202...3d8015fc1b.jpghttps://uploads.tapatalk-cdn.com/202...2638995f5f.jpghttps://uploads.tapatalk-cdn.com/202...1cc94f50ef.jpg Sent from my SM-G970U using Tapatalk |
Re: WPL C14 Quote:
|
Re: WPL C14 1 Attachment(s) I may have gotten frustrated enough with the trusses to give something else a shot... (still a work in progress...) |
Re: WPL C14 What software are you modelling with? |
Re: WPL C14 Quote:
Sent from my SM-G970U using Tapatalk |
Re: WPL C14 Interesting, I have the C24, almost done, show pics soon, alot of mods done. |
Re: WPL C14 Finally running again. Overall pretty happy with my chassis/suspension mods. Decent suspension travel without being bouncy/floppy. Axle mounted servo is about 1000% better than the stock CMS, lol. Dromida shocks are working pretty well, but I'd still like to soften them up just a bit more... Beadlock redesign will be next, my 3D skills are way better than they were a few years ago, hoping to widen the bolt circle by at least a few millimeters https://uploads.tapatalk-cdn.com/202...cee8346b6a.jpghttps://uploads.tapatalk-cdn.com/202...ed03e3e9d7.jpghttps://uploads.tapatalk-cdn.com/202...ad2acae97b.jpghttps://uploads.tapatalk-cdn.com/202...d72597eb6f.jpghttps://uploads.tapatalk-cdn.com/202...fc1916c58e.jpghttps://uploads.tapatalk-cdn.com/202...b6f420390f.jpghttps://uploads.tapatalk-cdn.com/202...f76144d8c7.jpg Sent from my SM-G970U using Tapatalk |
Re: WPL C14 I never got the notification for these replies. That build is super sick btw! How's the suspension link clearance on the 2-speed servo? People often have problems with them hitting the servo arm |
Re: WPL C14 Quote:
Yeah, I wasn't able to install the servo, I have the shifter wired into place in low gear right now, and have a single-speed 370 setup on the way. I also need to go through and measure all the hardware so I can order the correct stuff, it's kind of cobbled together at the moment. Sent from my SM-G970U using Tapatalk |
Re: WPL C14 Quote:
|
Re: WPL C14 There is this video about increasing the ground clearance by lifting the 2-speed gearbox up which also gives space for the servo, but at the cost of losing the middle tray and possibly requiring some cutting and remounting of the shell as well. |
Re: WPL C14 Quote:
|
Re: WPL C14 I don't suppose there are metal gears for the stock yellow gearbox? I'm satisfied with the performance of the stock motor but the gearbox gave out while my son was playing with it. I swapped in a spare motor/gearbox combo I had around and we were surprised that it seemed to have a much quicker motor. (Both cans are the same dimensions and both were from a C14 kit. The slower motor is the same speed as the one in my C24 kit.) He did a few wheelies by going in reverse and then hammering the throttle and of course that gearbox gave out. On both gearboxes it is the same gear that broke (the one that is connected to the one driving the output shaft). |
Re: WPL C14 Quote:
WPL-RC.com |
Re: WPL C14 So my C34 is getting here Monday! Happy 4th everyone! 8) |
Re: WPL C14 Quote:
|
Re: WPL C14 Quote:
|
Re: WPL C14 New to the wpl models and have recently installed the 2 speed gear box and v3 elextronics. Can anyone tell my why my drag brake works for high gear but not low? Thought it was supposed to be the other way around. Sent from my SM-G965W using Tapatalk |
Re: WPL C14 Quote:
I've got one otw for my C24, how are you liking yours? |
Re: WPL C14 Anyone have this version of the WPL gearbox they'd like to trade for a brand new 2-speed? I need a second set of these gears and shafts for a custom setup, but would prefer not to wait 6-8 weeks, lolhttps://uploads.tapatalk-cdn.com/202...a99f8eecc5.jpg Sent from my SM-G970U using Tapatalk |
Re: WPL C14 Quote:
|
Re: WPL C14 I actually love it, the low speed gearing is actually perfect. It can maimtain its speed over/through obstacles....maybe even better then a couple of my actual scalers lol Sent from my SM-G965W using Tapatalk |
Re: WPL C14 It's been a while since I posted. Here's my 34, perfect trail machine All stock other than tires, axle housings, driveshafts, and 2-speed transmissionhttps://uploads.tapatalk-cdn.com/202...ec53781f0a.jpghttps://uploads.tapatalk-cdn.com/202...517943d935.jpghttps://uploads.tapatalk-cdn.com/202...b5a6fbbce0.jpg Sent from my U693CL using Tapatalk |
Re: WPL C14 So after several iterations, I think the current plan is to do a forward motor setup with a divorced 3D printed transfer case. Still some minor details to work out.... I may even go back to CMS if I can devise a decent panhard setup... https://uploads.tapatalk-cdn.com/202...cd670c566d.jpghttps://uploads.tapatalk-cdn.com/202...9e81de62cb.jpghttps://uploads.tapatalk-cdn.com/202...88cb48d459.jpg Sent from my SM-G970U using Tapatalk |
Re: WPL C14 Looking good! Are those custom frame rails? Sent from my U693CL using Tapatalk |
Re: WPL C14 Quote:
Sent from my U693CL using Tapatalk |
Re: WPL C14 Quote:
Sent from my SM-G970U using Tapatalk |
Re: WPL C14 Quote:
Sent from my U693CL using Tapatalk |
Re: WPL C14 I'm about to take this Hilux, but a C24 or C14? deephis |
All times are GMT -6. The time now is 06:04 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com