were's the new jeep pro-line bodies??

[BJoe]

Originally Posted by TheHeadHunter

I wonder if it would fit on a touring car chassis like a TA05 ...sounds a little too narrow at 185mm width

Might work on my E4T, it was pretty narrow from the get go stock.

Originally Posted by scouperacer

I noticed that the roof rack matches a 96' and up not a 92' which had full length racks. Not to be pickey but...

This could really work for any non Wagoneer pre-97 XJ to be honest.

[super mud]

Originally Posted by rhett314

I think the problem is the bottom of the doors. The front bumper is also raised up. If you were to trim the middle I think it would look spot on. I can't wait to get my hands on one.

Thats a great idea which would get it pretty close also. Oh and that section of body below the rear taillights I would plan to chop off any way and run a tube bumper around the corners lol. Like this one

[BJoe]

Originally Posted by super mud

Thats a great idea which would get it pretty close also. Oh and that section of body below the rear taillights I would plan to chop off any way and run a tube bumper around the corners lol. Like this one

That looks familiar, have you posted it on here before, or just NAXJA?

[PineapplAssasin]

Originally Posted by Jeepial

I'm gonna pistol whip the next person who says shenanigans!!!

shenanigans, i had to say it.

i really hope its an xj, but i'd settle for just about anyhting other than a jk.

[solomon7]

Originally Posted by PineapplAssasin

shenanigans, i had to say it.

i really hope its an xj, but i'd settle for just about anyhting other than a jk.

Gosh, me too

Have you read any of this thread? You really should
Maybe just the previous page even.

[Rocket]

Originally Posted by super mud

Definatley not perfect scale like they say on their site.
Anybody even notice how messed the dimensions are behind the rear wheels?
They raised/extended the rocker panels which offset the rear tail lights and top of the rear bumper up higher. Which makes the rear end sucked up higher which at least in my eyes looks horrible and very noticeable. I didn't even have to compare pictures to know something was wrong.

Heres my 87 (which has the same body style as the 92, I just had this picture on hand)
Though, I'll probobly deal with it and end up getting one anyway. I mean at least they tried to provide this long awaited body for us so I shouldn't complain too much. If I do decide to build one I'm gonna do a replica of my 1:1 most likely

Wow, that backend is a little lame-1.1 that height in the back would make cargo room crappy back there! Body still looks good but that inaccuracy is buggin! I gotta say the window pillars and roof rack is neat, although seeing how Proline does the cage thing with bodies now, they could have done the roof rail as a seperate plastic asscesory!

Rhett314 says:
"I think the problem is the bottom of the doors. The front bumper is also raised up. If you were to trim the middle I think it would look spot on. I can't wait to get my hands on one."

I think I agree with Rhett314 that the deeper middle area between wheel wells is the scale issue here, as I've seen this with other Proline bodies like the old Chevy C10 body(not the comp one).

[stikup artist]

Hey guys I just bought my first crawler(venom creeper). Does any one know if the 92 jeep body would fit this or is it only for axial crawlers?

[Adamsdad]

Anybody else think the Cherokee looks smaller then 1/10?

[2JSC]

Originally Posted by Adamsdad

Anybody else think the Cherokee looks smaller then 1/10?

Actually it's larger. 1:1 WB = 104 where the body is 11.8, which is like 1:8.5

[JEEPADDICT]

XJ went on sale on the proline site this morning, mine has already shipped!

[RPP Hobby]

I got the E mail today and we should have ours on Friday

[finishline]

Originally Posted by Rpp Hobby

I got the E mail today and we should have ours on Friday

So that means ill have mine saturday, YES!

[prp1]

Pre-ordered one of each from RPP last week. I've been waiting on the XJ body for about 20 years a few more days won't kill me.

[2JSC]

I got a JK from Corey and an XJ directly from Pro-line, got my tracking number this afternoon! SOO excited!

[2JSC]

UPS says my XJ body should be here tomorrow. Woot!

[solomon7]

Looks like you may be the first to get it 2JSC
Pics mocked up or it didn't happen
Is it just me or does 19" sound a bit long for the body with an 11.8 WB?

[2JSC]

Oh there will be pics. Now to pick a color... orange, silver, or black... hmm.

[chev12olet]

Well Cory did you get the bodies or what?

[finishline]

Originally Posted by chev12olet

Well Cory did you get the bodies or what?

Conformation of shipping from RPP for me today. So I'll see it in a couple days.

[xjlongo]

Originally Posted by finishline

Conformation of shipping from RPP for me today. So I'll see it in a couple days.

Got mine too