Re: Turtle's Modified XV-01 Hey took mine out today and had a blast...until I broke! Where is a good place or the best place to get parts for this thing? Thanks, in advance. |
Re: Turtle's Modified XV-01 Quote:
I have looked on tower and Horzion and it looks like most parts are still on order. Your best bet will probably be Ebay. So what did you break and how? |
Re: Turtle's Modified XV-01 I found eveything...Tamiya America Inc. They have a ton of stuff for all their vehicles, free shipping over 75.00 :mrgreen: The course we set up was a little rough (thru the woods) and that plastic part that captures the hinge pin snapped(JJ3). Lost the dogbone, those little cups (NN2)that fit on the hinge pin that snap into the part I broke and the spacers. |
Re: Turtle's Modified XV-01 Do you think boiling any of the plastics be useful at all? I read, I believe in your other thread on the DF03, that the arms seem to be fairly brittle- same for the XV-01 or no? |
Re: Turtle's Modified XV-01 Quote:
Quote:
|
Re: Turtle's Modified XV-01 Quote:
The XV uses what feels like a slightly different composite from the DF01 for example, but still wouldn't recommend it. I imagine it wouldn't make much difference on such a short arm suspension anyway. |
Re: Turtle's Modified XV-01 Just saw a XV-01T is in the works, can't find much information, but seems like some cool bodies should be coming out. "thumbsup" |
Re: Turtle's Modified XV-01 Quote:
|
Re: Turtle's Modified XV-01 Quote:
|
Re: Turtle's Modified XV-01 Possibly something in the line of Rally Legends truck that is being released in October?? |
Re: Turtle's Modified XV-01 Quote:
Linky: http://tamiyablog.com/2012/09/protot...amiya-rc-cars/ |
Re: Turtle's Modified XV-01 Ah man that is disappointing if its going to look like that. That body needs to cover those tires up and they need to not recycle the hilux wheels onto the rig. |
Re: Turtle's Modified XV-01 I don't mind the wheels/tyres and general design too much, but you're right, a re-mold wouldn't go astray. The thing I don't like is that big gaping hole looking in at the motor. Don't know a lot about Truck Racing apart from the Short Course Trucks - Is this thing looking 'scale'? |
Re: Turtle's Modified XV-01 yea definatly dissapointing, that s10 body just dont look right. |
Re: Turtle's Modified XV-01 Since I shot Rodney's XV-01 and my Taco Time in the garage I decided to get some photos of my XV-01 too. I love the little garage. http://i34.photobucket.com/albums/d1...G_9731smal.jpg http://i34.photobucket.com/albums/d1..._9715small.jpg http://i34.photobucket.com/albums/d1..._9718small.jpg |
Re: Turtle's Modified XV-01 The garage is sweet! Are you ordering your Hoonigan decals from the website or having them custom made? I need some decals made for the RC club I sponsor at school but none of the local vinyl shops want to fool with it. |
Re: Turtle's Modified XV-01 Quote:
RPMJ custom orders them I think. I think there are vendors on RCC who make them. Might want to try some of your local guys, I have found the most random people end up having vinyl cutters. |
Re: Turtle's Modified XV-01 That garage is sweet! Been wanting to make one for a long time, but been to lazy. Plus I don't know where to put it.. Still think this is the car to get? Been really thinking of getting a rally car setup here, debating between getting one of my unused touring cars converted, or starting fresh. |
Re: Turtle's Modified XV-01 Quote:
More work done to the XV01. Got some parts in. http://i34.photobucket.com/albums/d1..._2193small.jpg Front CVDs assembled, they come in 3 bags. http://i34.photobucket.com/albums/d1..._2194small.jpg A arm mounts for the front. I have heard of a couple guys breaking the front block, so I went ahead and upgraded before there was trouble. http://i34.photobucket.com/albums/d1..._2198small.jpg Yeah Racing knuckles with asiatees TLT hexs. http://i34.photobucket.com/albums/d1..._2199small.jpg Slipper clutch in, the really good thing about it is it comes with a standard 48 pitch spur. http://i34.photobucket.com/albums/d1..._2200small.jpg Its a interesting set up with the nut on the other side of the case. http://i34.photobucket.com/albums/d1..._2201small.jpg I went ahead and made some mud flaps for the front end. There was a little bit of debris getting in on the chassis and occasionally causing steering jams, this should help. Its a cut up 20" BMX tube. http://i34.photobucket.com/albums/d1..._2202small.jpg http://i34.photobucket.com/albums/d1..._2203small.jpg http://i34.photobucket.com/albums/d1..._2204small.jpg |
Re: Turtle's Modified XV-01 wow.....:roll: another cool ass painted drifter basher thingie....:mrgreen: |
All times are GMT -6. The time now is 02:14 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com