RCCrawler Forums

stelerzman · 07-01-2011, 08:50 AM

Pretty cool looking motor for a toy, I like yours MUCH better.

.

What are the options for motors, in other words, is it designed for only a HH puller? Will any other size fit?

Can't say enough about you're craftsmanship. Frekin awesome.

Eritex Inc. · 07-01-2011, 08:53 AM

Quote:

Originally Posted by stelerzman

Pretty cool looking motor for a toy, I like yours MUCH better.

.

What are the options for motors, in other words, is it designed for only a HH puller? Will any other size fit?

Can't say enough about you're craftsmanship. Frekin awesome.

Standard 540 motors, and brushless motors fit. I will get a shot of one of my brushless motors mounted in it

stelerzman · 07-01-2011, 09:44 AM

Sweet, it looked like only the HH puller. Glad to here. Thanks.

Eritex Inc. · 07-01-2011, 09:53 AM

Quote:

Originally Posted by stelerzman

Sweet, it looked like only the HH puller. Glad to here. Thanks.

Nope, I just like mocking up and use pullers for a couple reasons...

1. The can is long so if it fits, a 540 will have no problem.

2. They just look cool.

3. I think Holmes Hobbies has about the best products out there so a little whoring for John is called for

chino63 · 07-01-2011, 11:27 AM

Quote:

Originally Posted by Eritex Inc.

Custom machined but 32P so they are pretty tough

Good to hear. So if bad things happens (since I'm good at breaking unbreakable stuff), will I be able to get a spare set or two of gears?

1BadJeepBruiser · 07-01-2011, 11:54 AM

Pm coming, must obtain engine awesomeness

stelerzman · 07-01-2011, 12:24 PM

Any updates?

Eritex Inc. · 07-01-2011, 01:38 PM

Quote:

Originally Posted by stelerzman

Any updates?

Nope, 100 degrees outside and even hotter then that in the shop. A/C is going in though

Eritex Inc. · 07-01-2011, 02:03 PM

***Update***

EXI-00 goes to Eritex Inc.

EXI-01 goes to DTP

EXI-02 goes to tootall

EXI-03 goes to Harley

EXI-04 goes to Jason

EXI-05 goes to Crawlski

EXI-06 goes to chino63

EXI-07 goes to Stelerzman

EXI-08 goes to wants to remain un-named

Also, I feel bad for those who could not come up with the cash right away for one of these so I am going to see how many more I could get done. There might be 5 more available.

BigSki · 07-01-2011, 02:15 PM

Any lay-o-way plans??

I really want one of those transmissions for the next 1/6th Willys build.

BGGruff · 07-02-2011, 12:00 PM

Wow Holy Crap! Thats just too much.
Absolutely killer. I hope I have the money again
one day to spend on this hobby,I sure would like one of these.
Outstanding work!

Eritex Inc. · 07-03-2011, 12:46 AM

Thanks for all the compliments guys and sorry for no updates today. It has been really hot and I have been getting the A/C installed in the shop for the past 2 days. As of 20 minutes ago it was 79 degrees in there. That is the coolest it has been in weeks (most days it hovers around 92 to 97 in the shop

). The heat was taking a toll on me so I ordered a 28000 BTU A/C unit. It took 2 days to get it installed and fired up but man is it nice in there now

CM_113 · 07-03-2011, 10:18 AM

:speechless: WOW, this has to be the MOST scale motor and tranny i have ever seen. you are AWESOME!!!!!!

Eritex Inc. · 07-03-2011, 10:26 AM

Back in the shop where it is a beautiful 77 degrees, there will be pictures today

crawlski · 07-03-2011, 11:25 AM

Congrats on the new a/c. Your not going to know how to act with the shop under 90!!

Eritex Inc. · 07-03-2011, 11:36 AM

Quote:

Originally Posted by crawlski

Congrats on the new a/c. Your not going to know how to act with the shop under 90!!

No kidding, it is awesome in here. I do not have to have an industrial fan blowing on me at all times. I am sure glad the person who built the shop went with 2x6 walls and R-21 insulation. The attic is blown in at an R-40 or so. Right now it is 92 with a heat index of 97 but I am sitting here working in SW, drinking a cup of coffee...not sweating

crawlinforfun · 07-03-2011, 11:38 AM

Hey man I am going to PM you with some questions that are more in depth, but what do you think of maybe doing a 330 DeSoto Hemi, a 440 six pack, 383, or a 426 Hemi?

Super · 07-03-2011, 12:06 PM

I just spent the better part of an hour reading the entire thread and ai'm looking for more! May I say from the bottom of my heart.....

HOLY FAWK!!!!

Awesome work man!

Eritex Inc. · 07-03-2011, 01:04 PM

Quote:

Originally Posted by Super

I just spent the better part of an hour reading the entire thread and ai'm looking for more! May I say from the bottom of my heart.....

HOLY FAWK!!!!

Awesome work man!

Thank you

Eritex Inc. · 07-03-2011, 02:32 PM

Also, for all that have PM'ed me, please drop me another PM if you never received a reply. I have been doing my best to keep up but I thing there are some I have seen but did not respond to. Thanks

07-01-2011, 08:50 AM	#201
stelerzman I wanna be Dave Join Date: Sep 2009 Location: n. palm beach Posts: 4,123	Pretty cool looking motor for a toy, I like yours MUCH better.. What are the options for motors, in other words, is it designed for only a HH puller? Will any other size fit? Can't say enough about you're craftsmanship. Frekin awesome.

07-03-2011, 12:46 AM	#212
Eritex Inc. RCC Addict Join Date: Nov 2007 Location: in the woods Posts: 1,915	Thanks for all the compliments guys and sorry for no updates today. It has been really hot and I have been getting the A/C installed in the shop for the past 2 days. As of 20 minutes ago it was 79 degrees in there. That is the coolest it has been in weeks (most days it hovers around 92 to 97 in the shop). The heat was taking a toll on me so I ordered a 28000 BTU A/C unit. It took 2 days to get it installed and fired up but man is it nice in there now

07-01-2011, 09:44 AM	#203
stelerzman I wanna be Dave Join Date: Sep 2009 Location: n. palm beach Posts: 4,123	Sweet, it looked like only the HH puller. Glad to here. Thanks.

07-01-2011, 11:54 AM	#206
1BadJeepBruiser Sinking with the ship Join Date: Mar 2005 Location: El Capitan...sole survivor and sinking fast Posts: 8,864	Pm coming, must obtain engine awesomeness

07-01-2011, 12:24 PM	#207
stelerzman I wanna be Dave Join Date: Sep 2009 Location: n. palm beach Posts: 4,123	Any updates?

07-01-2011, 02:03 PM	#209
Eritex Inc. RCC Addict Join Date: Nov 2007 Location: in the woods Posts: 1,915	*Update* EXI-00 goes to Eritex Inc. EXI-01 goes to DTP EXI-02 goes to tootall EXI-03 goes to Harley EXI-04 goes to Jason EXI-05 goes to Crawlski EXI-06 goes to chino63 EXI-07 goes to Stelerzman EXI-08 goes to wants to remain un-named Also, I feel bad for those who could not come up with the cash right away for one of these so I am going to see how many more I could get done. There might be 5 more available.

07-01-2011, 02:15 PM	#210
BigSki I wanna be Dave Join Date: May 2008 Location: Baltimore Posts: 4,442	Any lay-o-way plans?? I really want one of those transmissions for the next 1/6th Willys build.

07-02-2011, 12:00 PM	#211
BGGruff RCC Addict Join Date: Mar 2007 Location: MS Gulf Coast Posts: 1,949	Wow Holy Crap! Thats just too much. Absolutely killer. I hope I have the money again one day to spend on this hobby,I sure would like one of these. Outstanding work!

07-03-2011, 10:18 AM	#213
CM_113 Rock Stacker Join Date: May 2004 Location: Reidsville Posts: 71	:speechless: WOW, this has to be the MOST scale motor and tranny i have ever seen. you are AWESOME!!!!!!

07-03-2011, 10:26 AM	#214
Eritex Inc. RCC Addict Join Date: Nov 2007 Location: in the woods Posts: 1,915	Back in the shop where it is a beautiful 77 degrees, there will be pictures today

07-03-2011, 11:25 AM	#215
crawlski Quarry Creeper Join Date: Jun 2008 Location: anchorage Posts: 395	Congrats on the new a/c. Your not going to know how to act with the shop under 90!!

07-03-2011, 11:38 AM	#217
crawlinforfun Pebble Pounder Join Date: Mar 2011 Location: Shumway Posts: 182	Hey man I am going to PM you with some questions that are more in depth, but what do you think of maybe doing a 330 DeSoto Hemi, a 440 six pack, 383, or a 426 Hemi?

Sponsored Links

07-03-2011, 12:06 PM	#218
Super Rock Crawler Join Date: Feb 2009 Location: Wrightstown Posts: 960	I just spent the better part of an hour reading the entire thread and ai'm looking for more! May I say from the bottom of my heart..... HOLY FAWK!!!! Awesome work man!

07-03-2011, 02:32 PM	#220
Eritex Inc. RCC Addict Join Date: Nov 2007 Location: in the woods Posts: 1,915	Also, for all that have PM'ed me, please drop me another PM if you never received a reply. I have been doing my best to keep up but I thing there are some I have seen but did not respond to. Thanks

RCCrawler Forums

Thread: My take on a scale drivetrain (pic heavy)