TTC entry thread

[Moosekey]

The Tundra Hybrid

Well finally I'm posting up my rig for TTC, hopefully this year you boys will be kind enough to vote me in! I'm a worthy competiter who is not afraid to put on a show. my rigs are always built to the nuts and are up to the challenge. This rig took 1st place at MSD Nats last year. Lets get to the rig.

SPECS:

Pinch Flat Chassis built for me based off a SCX10 Rails
Tundra Body
Axial Skid with Traxxas Links
Losi axles
Losi Trans with front and rear dig
Losi shocks
Losi drivelines
Lunsford steering links
Custom mounting plate for servos
Tekin RS Pro Brushless with 10.5 motor
Hi Tec high voltage steering servo
Hi Tec Dig Servo
Hitec HS-7940TH winch servo
BEC Pro
Racers Edge glitch buster
Futaba 4PL
3 cell
VP Wheels
Ripsaws w/Crawler Innovation foams
Team3Six Seats plus many other Accesories
RC4WD Accesories

I might get rid of the dig and put in rear steer.

Build Thread: Tundra truggy mod Montana nats

[War Pig]

The TTC entry thread will close at midnight on Saturday July the 21st.

Better get those entries in! You have a week!!!!

Wow, that's only 14 entries. Better get them in, I'd like to see at least 20 entries!

[ROCKEDUP RICKY]

If only 14 and your taking 12, whats 2 more in the event going to hurt.

[666]

I figured there would be more.....

[War Pig]

I know of at least 3 or 4 that are working on their rigs.....hope they get 'em done enough to enter them.

[team3six]

I'll Call this Redemption!

I am currently working on the FOJV Buggy, but not sure if it will be ready or capable by that time. And rather than attempt to enter the TTC with a rig that may or may not perform well. I would rather enter the new improved Tennycar Version II that does perform well.
It's done, It's built, and It's ready for brutality!

here is the New Tennycar, that deserves a Second chance

better, stronger, and more powerful than ever before!

Truck runs solid. And the Driver vows to prove he can drive and not take on talkers.

Let all these dreamers talk the talk with some over blown motor. I'm about to show ya that its more about endurance then to babysit your truck after every course!

Bottom line is. I am the underdog! I have less experience than most who are fighting to be entered. But I put up a good fight in the first 5 courses of 2011's TTC without fixing a thing!, and the Competition knows it.

No hidden extras, No rear steer, No Dig, and No Super powers. A real truck for a real comp.

Here is what I am hoping to have voted in.

The DMG/team3six Teenycar Version II

All steel welded custom tube chassis
Custom Aluminum body panels
Rear full metal jacket Transmission with GCM 1:1 Transfer case
Custom 4 link in rear and front
VP Axial axle cases with fully loaded gear from SDS and Axlemaster
Custom MIP shafts
Junfac performance shocks in front and back
VP Rockstar rims
Proline TSL tires

Tekin FXR
HolmesHobbies special built 25T Brushed motor
Custom Hitec 7955TG Winch with war Pig spool
XBEC
Turnigy 3S 2200mAh Lipo
Spektrum DX3R

And all the Scale goodness one can stare at!

I'm not just talking smack. I'm gonna let the truck do the smakin'! So if you want to see this truck do justice, then let the votes begin.

Thanks to everyone who voted for me last year! Please have faith in me to do it again! I'm not trying to bring home trophies for best looking tuber this time, Now its Personal to all the smack talkers!

[BigBaller]

No long story, same truck as the last TTC event I was voted in for that other guy.

If it means anything to you....Stu loves it too!!












Ready, please vote for the Taco.

[boob dude]

Boob Dude presents DOUBLE D for your TTC viewing pleasure.

Yes another UTARD thats coming west to kick some ass at the North West Scale Nationals.

Last year I was top three in both class 1 and class 2 at MSD, now its time to step it up and WIN this years TTC at the NWSC.

I'm not driving over 800 miles to give up quick, i'm planing on running this rig into the ground, and then some!!!!!

NOW FOR THE SPECS:

AXIAL BASED SCX10 TUNDRA
REIGN LABS CHASSIS BY KAETWO
LOADED AX 10 AXLES
FRONT AND REAR STEERING WITH XR 10 MODS
850 OZ OF STEERING SERVOS
HITEC HS 7940 TH WINCH SERVO
LOSI DRIVE LINES
FXR
DOUBLE BEC'S
AJ KUSTOMS WINCH PLATE
2 ROW FULL INTERIOR WITH DRIVERS
HOLMES POWER PLANT
FUTABA 4 PL
BUILT AXIAL TRANS
LOSI SHOCKS
3CELL POWER
VP WHEELS
R-35 RIP SAWS WITH CI FOAMS
AND OTHER THINGS IM SURE I HAVE FORGOT!!


Thanks for you votes in advance, now let go beat the crap out of some toy trucks, may the best man WIN!!!!!!

[Grizzly4x4]

Guido was built in 2007 as a Top Truck Challenge scale build and has evolved over the years to perform better and follow the changing trend of TTC rigs. This has always been a dual purpose rig designed to merge concourse award scale looks and performance.
Guido has run in several TTC events, including the Colorado TTC series, and over the years I have learned what it takes to build a rig that can compete and keep running through the abuse of these events.

There are many capable rigs being entered; I hope however that you find Guido worth a vote. For this year Guido will be getting custom width AR60 axles with XR10 universals to increase the track width just over 1". The width increase will help with stability and gives a bit more room for the unbelievably scale looking IROK tires. I know, the Ripsaws and Pitbulls will perform better, but the spot on scale look of the IROK gave them the nod. The front steering linkage will be changed to remove slop, increase throw, and make additional up-travel room due to the lower ride height. Besides a new color, no other major changes are planned, Guido has proven to be be built tough and reliable.

I appreciate the chance to put on a show for you, I know I have not been real active lately due to other life demands, but I'm all in for this event. If given the chance to compete I will push Guido as hard as necessary to win with no concern for breakage or damage. Good pictures and video are at the top of my priority list!


Build thread link

Chassis/Suspension
Chassis: Custom tube chassis with aluminum frame rails
Front Axle: Custom AR60 with steel tubes and steel truss, Axial steel locker, hardened steel gear set, XR10 universals, Vanquish Products Wraith Chubs and knuckles
Front Suspension: Custom 4 link, coil spring design, HPI 3.5" shocks
Rear Axle: Custom AR60 with steel tubes and steel truss, Axial steel locker, hardened steel low gear set, XR10 universals, Vanquish Products Wraith Chubs and knuckles
Rear Suspension: Custom triangulated 4 link, coil spring design, link mounted HPI 4" shocks

Drivetrain
Transmission: Axial AX10, Robinson Racing steel internals, 32 pitch spur and pinion gears
Driveshafts: Traxxas T Maxx driveshafts with steel yoke adapters (super reliable)
Wheels: RPP Hobby Scale Wheels
Tires: RC4WD 2.2 IROKS
Foams (front): Custom mix of foams
Foams (rear): Custom mix of foams

Electronics
Motor: Holmes Hobbies 7T Cobalt Puller, or Velineon 3500, or maybe a 4074 Leopard 4 pole 2200 KV brushless
ESC: Holmes Hobbies TorqueMaster BR-XL, or Castle Creations Sidewinder if brushless
Batteries: EFlite 2100 mAh 11.1V LiPo
Steering servos: Chassis mounted Hitec HS7955TG (front), Hitec HS5955 (rear).
BEC: 2x CC 10A BEC's
RX: SR 3000, SR3001
Radio: Custom 5 ch Spektrum DX3

Misc
Winch: QS-8274 (front)
Parma Hemi Scale Motor
4WS
DJ and Chino scale driver figures

Bottom picture is the most current. Thanks for the support.











Trying on the new shoes.

[team3six]

All the bad ass boys and girls are coming out to play. This is getting serious!

Now where is Andy at?

[Grizzly4x4]

Originally Posted by team3six

All the bad ass boys and girls are coming out to play. This is getting serious!

Now where is Andy at?

Andy is my motivator, I need him.....

[Colby]

I got soo looking forward to entering this this year, but funds wouldnt allow it. $600 plane ticket couldnt be pulled from my 18yr old income.

However, Im glad to see Guido in the mix, one of mine and prob most of RCC's favorite rig of all time. Hope you do well Griz, I know Ill be voting

[Grizzly4x4]

Originally Posted by Colby

I got soo looking forward to entering this this year, but funds wouldnt allow it. $600 plane ticket couldnt be pulled from my 18yr old income.

However, Im glad to see Guido in the mix, one of mine and prob most of RCC's favorite rig of all time. Hope you do well Griz, I know Ill be voting

Thanks Colby. Sorry you won't be able to make it.

[darkmanx]

Dam I would enter mine but I am still waiting on parts!! :(

[TURTLE]

Originally Posted by Grizzly4x4

Andy is my motivator, I need him.....

If you want I can bring my accordion and play for you, like I used to do for Brad.

[DISTURBIN' tha PEACE]

If voted in, I'll bring my can of whoop-ass!

WHO's YOUR CADDY!!!!!!
Cassis
Chassis: Custom MG200 tube chassis
Front Axle: Vanquish Products AR60, Axial OD hardened steel gear set, Felsenfest spool.
Front Suspension: 3 link w/panhard, Proline Slash Powersroke shocks.
Rear Axle: Vanquish Products AR60, Axial UD hardened steel gear set, Felsenfest spool.
Rear Suspension: 4 link, Proline Slash Powersroke shocks.

Drivetrain
Transmission: Axial AX10, Robinson Racing steel internals, 32 pitch spur and pinion gears
Driveshafts: MIP C-drives w/Gunnar Pins.
Wheels: Vanquish Products SSZ Stars w/Disc brakes
Tires: RC4WD 2.2 IROKS
Foams (front): Crawler Innovations DD's

Electronics
Motor: Tekin Pro4 3000 KV brushless
ESC: Tekin RSpro
Batteries: 2-2200mah 11.1V LiPo
Steering servos: Chassis mounted Hitec HS7980TH (front), Hitec HS7980TH (rear).
BEC: 1-CC 25a BECpro, 1-CC 10A BEC.
RX: 4-ch Futaba
Radio: Futaba 4PK

Misc
Winch: Jugster dummy winch, Hitech 5955TG w/HeyOK HV winch controller
Me & my girl scale driver figures w/replica tattoos.....hahaha!
2-stage NOS

















Thanks in advance for voting for me & I will not disappoint.

[rocksteadily]

You got my vote Sheldon!!! Hawaii represent!! Do it to it!!!

[ROCKEDUP RICKY]

Originally Posted by darkmanx

Dam I would enter mine but I am still waiting on parts!! :(

Put up what you got, there's time to finish.


This is going to be a tough vote, then I thought to myself, it'll be easy, just figure out which ones you don't want in and vote for the rest.

[YoUnG_vErSiOn]

Sheldon my first choice is you Brother.

[ScaleWalker]

U got my vote braddah! Cheee 808 REPRESENT baby!