|
| LinkBack | Thread Tools | Display Modes |
10-05-2011, 09:39 AM | #1 |
Quarry Creeper Join Date: Jun 2009 Location: South Crawl-o-lina
Posts: 471
| Official G6/KOH/Rock Race Rules & Rigs Thread
i wanted to post up a G6/KOH/Rock Race thread so people can read the rules and post pics and specs on their scale rigs. hopefully some of the NC and GA scale guys will chime in and possibly attend a few events or host some at thier crawl spots as well. RULES course/rig rules: (these are NOT set in stone, just a base for the first few events until we can see what needs to change to make it bettrer) 1. 1.55/1.9 and 2.2/wraith classes (no moa) 2. must be a scale chassis (no twin vertical plate) 3. 5 minimum scale accessories (winch/tow strap reccomended) 4. scale type tires both classes (no comp tires sedonas/rovers/ect.) 5. "X" number of sections using survey tape as boundaries. each section will be marked by a numbered tennis ball gate at the entrance. 6. sections must be ran in numerical order 7. sections will be no less than 12" wide at any point 8. orange ribbon will always be on the right to note direction 9. no "hand of God" roll overs or repositions 10. no driver will straddle a boundry to get progression 11. no dig/rear steer (may change once we see these being installed more) judges 1.judges calls are final. 2. judges will have a tow strap known as a "judges winch". theses can be used for rollovers or to help you get progression but use comes with a penalty. skills section/bonus sections 1. skills section are mandatory 2. bonus sections are optional. time bonuses will be determined on the obsticle. *skills section can be any task i driver is asked to perform during thier run on the course. (changing a tire, pulling an object a certain distance, ect.) *bonus sections will be variuos obstacles. (hard climbs, rope bridge, jumps, ect.) penalties/progression 1. section progression- 2 minutes off time total 2. boundry marker- 1 minute per tire that touches or exits boundry up to 4 minutes(if all 4 tires exit boundry the driver must re-enter the section at entrance) 3. winches- no penalty for winch mounted on rig/judges winch- 3 minute penalty 4. straddling boundry- no progression and 10 minute penalty 5. non-completion of skills section- 30 minute penalty 6. non-completion of set sections- total time on course plus 1 hour **NOTES** 1. i added the no dig/rear steer rule. this may change if interest in it grows. anyone with these installed MUST lock them into position before running the course. use of dig or rear steer on the course will result in a DNF with the max time penalty. if we do any heads up runs on the course after the comps it will be allowed. 2. scale chassis examples- SCX10, TCS X-trail/L-trail, Scale shop, Tamiya hilift, Timberwolf, any life like tube chassis, ect. 3.scale accessories(must be an additional item found on a 1:1 rig)- winch, tow strap, hilift jack, spare tire, shovels, axes, coolers, sleeping bag, license plate, ect... RIG SPECS body: chassis: axles: trans: motor/esc: servo: tires: wheelbase: favorite bolt on mod: favorite mod you designed/made: upcoming mods: hope to see all of you at an event soon. i am working on getting us an event going and all help, input, and suggestions are appreciated. Last edited by TODBLDZ; 10-05-2011 at 09:45 AM. |
Sponsored Links | |
10-05-2011, 09:52 AM | #2 |
Quarry Creeper Join Date: Jun 2009 Location: South Crawl-o-lina
Posts: 471
|
i will start it off My Hilux: RIG SPECS body: dove nosed hilux/honcho bed chassis: SCX10 axles: Axial trans: Axial motor/esc: Tekin FXR/ Tekin 35t servo: 7955tg tires: RC4WD 1.9 boggers wheelbase: 12.3" favorite bolt on mod: axial hi steer knuckles favorite mod you designed/made: 5/16 delrin links w/ revo ends upcoming mods: dovetailed bed RCCrawler1396's (Jeremy) TJ RIG SPECS body: caged New Bright TJ chassis: SCX10 axles: Axial trans: Axial motor/esc: Tekin FXR/ 45t servo: 7955tg tires: RC4WD 1.9 boggers wheelbase: favorite bolt on mod: favorite mod you designed/made: 5/16 delrin links w/ revo ends upcoming mods: |
10-05-2011, 02:41 PM | #3 |
Rock Crawler Join Date: Dec 2010 Location: Piedmont, SC
Posts: 551
|
My C10 Flatbed body: Proline C10 chassis: Scale shop axles: Axial trans: Axial W/ Robinson internals motor/esc: Waterproof BRXL / Integey 35t servo: Hitec 645 tires: RC4WD 1.9 boggers / Proline 2.2 Flatirons wheelbase: 11.5" favorite bolt on mod: 3 Racing winch favorite mod you designed/made: Real wood bed / custom front bumper upcoming mods: Better motor if I ever kill this Integey...its about 3 years old Slowsis's DMG Nemesis body: DMG Nemesis chassis: DMG Nemesis axles: Axial trans: Axial W/ Robinson internals motor/esc: Novak Rooster / Integey 55t servo: Hitec 645 tires: Pitbull 2.2 Rock Beast wheelbase: 12.5" favorite bolt on mod: Scale window nets favorite mod you designed/made: upcoming mods: Waterproofing / New Panels Last edited by Slowbro; 10-05-2011 at 03:05 PM. |
10-05-2011, 04:43 PM | #4 |
Rock Crawler Join Date: May 2009 Location: just north of BFE in SC
Posts: 979
| RIG SPECS body: Doved F/R Toyota Hilux chassis: SCX10 axles: Wraith AR60 trans: Summit motor/esc: MMP w/13.5 redline servo: 7950 hitec tires: Axial Ripsaws wheelbase: 13" favorite bolt on mod: Wraith axles favorite mod you designed/made: XR10 skid/tranny mount upcoming mods: Switching all steel tube work to aluminum |
10-05-2011, 06:30 PM | #5 |
Quarry Creeper Join Date: Sep 2009 Location: In the middle of Cleveland-Troutman-Mooresville, NC
Posts: 298
|
My Short Bus Wraith UNDER HEAVY CONSTRUCTION body: .020 Aluminum, stock hood chassis: Wraith with some mods axles: Wraith Ar 60? trans: Stock motor/esc: Anything... Holmes BRXL waterproofed servo: Steering Hitec 7950, Winch Hitec 5645MG tires: 2.2 TLS Super Swamper wheelbase: 13 3/4 favorite bolt on mod: Banjo or Barrel of Woop A$$ favorite mod you designed/made: I guess the 3/8 tapered lower delrin links. upcoming mods: Mg200 servo winch bumper, vp goodies. Last edited by duty; 10-07-2011 at 07:02 AM. |
10-05-2011, 07:04 PM | #6 |
Pebble Pounder Join Date: Nov 2010 Location: Throttleville
Posts: 195
|
My Wraith <Currently In Build Process> body: Dinky RC hood and roof (being painted) chassis: stock axles: stock trans: stock motor/esc: Holmes 32T Crawlmaster Handwound, stock ESC servo: HiTec 7954SH tires: 2.2 HB Sedonas wheelbase: stock favorite bolt on mod: motor favorite mod you designed/made: new interior (almost finished) upcoming mods: Tekin FXR, punisher shafts, 2.2 Swampers on Vanquish SSZ-9's, Winch, Vanquish upper and lower links Last edited by Full_Throttle; 10-05-2011 at 07:07 PM. |
10-07-2011, 11:31 PM | #7 |
Newbie Join Date: May 2011 Location: Clemson
Posts: 25
|
RIG SPECS body: Wraith chassis: Wraith axles: RC4WD XVD's Front /Axial Rear trans: Axial w/ steel internals and 32p spur/pinion motor/esc: HH 21t TQmaster/Waterproofed BRXL servo: 7955tg (front & Rear) tires: 2.2 RockGrabber on DNA Snipers wheelbase: 14" Track:11.75" favorite bolt on mod: VP titanium links & Rear Steer favorite mod you designed/made: Carbon Fiber panels and hood inserts upcoming mods: Winch |
10-09-2011, 09:56 PM | #8 |
Quarry Creeper Join Date: Oct 2008 Location: A little town called Dallas
Posts: 434
|
Started tearing the Jeep apart tonight and doing a complete rebuild on the shocks and axles. Then add more lighting and better electronics. Will add more updated pics as they come |
10-10-2011, 07:58 AM | #9 |
I wanna be Dave Join Date: Oct 2008 Location: Sumter
Posts: 6,141
|
VERY nice YJ Eric!
|
10-11-2011, 10:23 AM | #10 |
Pebble Pounder Join Date: Jan 2011 Location: augusta
Posts: 133
|
Chassis: custom mg200 with full Exo cage with servo winch mount Axles: axial with super 300s. Wraith's coming soon Motor esc: tekin rx8 with 1400 kv t8 motor Transmission: axial with all Robinson racing gears and 32p spur gear Wheels tires: 2.2 Baja claws wrapped around vp ssz wheels |
10-11-2011, 10:52 AM | #11 |
Rock Stacker Join Date: Dec 2010 Location: Easley
Posts: 59
| RIG SPECS body:GCR Ambush, top off of discontinued GCR, Front and Rear LED’s chassis: SCX10 axles: AX10 with HD gears trans: Vp – Robinson Racing metal gears motor/esc: Putnam 19T / HH BRXL servo: Hitec 645 tires: 1.9 RC4WD Boggers wheelbase: 11 ¾” favorite bolt on mod: Vp Tranny favorite mod you designed/made: upcoming mods: Metal winch bumper |
10-11-2011, 02:14 PM | #12 | |
I wanna be Dave Join Date: Oct 2008 Location: Sumter
Posts: 6,141
| Quote:
| |
10-11-2011, 02:17 PM | #13 |
Pebble Pounder Join Date: Jan 2011 Location: augusta
Posts: 133
|
I was going for the baja look !!!!! That was the old axles with wheel wideners that I didn't like but I'm selling the new axles I just got and never ran to get. Something a little wider thanks for all the tips |
10-13-2011, 05:58 PM | #14 |
Rock Crawler Join Date: Oct 2009 Location: Columbia, SC
Posts: 536
| Still a loooong way to go yet. Longer beef toobs not installed in pics RIG SPECS body: Axial Trail Ranger chassis: SCX10 and solid rod axles: AXR-10, Felsenfast spools, OD/f, UD/r, VP knucks, STRC chubs f/r trans: AX w/ HR hardened gears, steel outputs, 32p spur/pinion motor/esc: Sidewinder w/ HH 10t puller on 3s servo: HS-7950TG f, HS-5645MG r (probably gonna change) tires: MT Baja Claw 2.2s wheelbase: 14" favorite bolt on mod: Longer Beef Toobs favorite mod you designed/made: interior/rear bed area (yet to come) upcoming mods: Tekin power!!! |
11-01-2011, 09:49 PM | #15 |
Quarry Creeper Join Date: Oct 2008 Location: A little town called Dallas
Posts: 434
|
Axles and Shocks torn down, relubbed and reassembled. SLWs with the 1.9 Rok Lox mounted. I trimmed every other lug on the outer edges to see if they'll work like the TSLs Now it's time for a few more lights and maybe a roof rack with a couple accessories in it |
11-02-2011, 06:50 AM | #16 |
Quarry Creeper Join Date: Jun 2009 Location: South Crawl-o-lina
Posts: 471
|
the little YJ is looking bada$$ eric. makes me want to keep my yota. |
11-02-2011, 07:30 AM | #17 |
Rock Crawler Join Date: Dec 2010 Location: Piedmont, SC
Posts: 551
|
Agreed! |
11-02-2011, 08:28 AM | #18 |
Pebble Pounder Join Date: Nov 2010 Location: Throttleville
Posts: 195
|
X 3!!
|
11-02-2011, 09:22 AM | #19 |
I wanna be Dave Join Date: Oct 2008 Location: Sumter
Posts: 6,141
|
x100 The YJ is a sleeper... |
11-02-2011, 08:45 PM | #20 |
Quarry Creeper Join Date: Oct 2008 Location: A little town called Dallas
Posts: 434
| |
| |