Go Back   RCCrawler Forums > Scale Rigs Brand Specific Tech > SSD Trail King - Pro Scale Chassis Builder Kit


Thread: Crims TK Build

LinkBack Thread Tools Display Modes
Old 10-22-2020, 07:17 AM   #1
Join Date: Apr 2020
Location: BRIDGES
Posts: 16
Default Crims TK Build

I bought the TK kit for a first crawler build, I havent had anything to do with rc car stuff for many years so had to get it all again, tools etc.

So far I have managed to collect most of the stuff I need.

The chassis we all know, but with xtra speed cantilever rear suspension.

I installed a Hobbywing Fusion 1800kva, although I had bought a 3300kva axe FOC system originally, I saw that I was never going to have the room if I lowered the body.

The only thing I had to do was shift a link over to the right side and remove the uprights coming off the centre diff housing. Not sure how strong it will be, and will see in the future.

Ill get some pics at some stage of this to show you.

Fitting a killerbody LC70 Toyota to it

SSD Assassins on 4.19 tires

Printed up some new rock sliders so they conform with original side pieces of plastic, as I managed to get the body low enough.

A few holes to patch up in the cockpit

Holes all patched

Cockpit painted

Going with the Killerbody alloy bumper

Install Loops Models rubber fenders, they seemed to look so much nicer than some of the others on the market.

I have been printing parts to fit the body to the chassis, and redoing them when I need to make adjustments.

I wanted a shorter tray, and wasn't keen on cutting up the original , so I have been printing new ones out.

When I get all the printed stuff done and fitted correctly I'll post some pics of them close up.

It hasn't been overly straight forward, but I have been enjoying the challenge of getting the body to fit well, and work out how to release it without taking multiple screws out.
CriMiN4L is offline   Reply With Quote
Sponsored Links
Old 10-22-2020, 08:33 AM   #2
Quarry Creeper
Join Date: Jan 2008
Location: Edmonton, AB
Posts: 407
Default Re: Crims TK Build

Looks awesome!! You have quite the nice collection of parts! Iím half way through my chassis build.

Sent from my iPhone using Tapatalk
RockCrawlingKid is offline   Reply With Quote

Crims TK Build - Similar Threads
Thread Thread Starter Forum Replies Last Post
JackedDriver's R1 Build (non-specific purpose / just wanted a good build) JackedDriver G-Made Crawlers 12 01-12-2016 08:59 PM
scx10 G6 2.2 Wroncho/Wrangler Build (AKA The Sleeping On The Couch Build) Irishchamp 2.2 Scale Rigs 45 10-09-2014 11:26 PM
Jeep scaler build and comp micro crawler build droopmodmrc Losi Micro-Rock Crawler 1 12-25-2012 01:34 PM
~53 Willys 2010 Comp Rig Build~ RC4WD MOA Worminator Build~ 53 willys General Crawlers 108 11-28-2011 01:42 AM
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT -6. The time now is 03:39 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Content Relevant URLs by vBSEO ©2011, Crawlability, Inc.
Copyright 2004-2014 RCCrawler.com