|
| LinkBack | Thread Tools | Display Modes |
08-28-2014, 06:02 AM | #1 |
Rock Crawler Join Date: Mar 2009 Location: AZ
Posts: 789
| Gauging interest for super foams from CI
So the purpose of this thread is to see what you guys would be interested in as far as super foams. So post up what foams in particular you would be interested in or if you don't know post up what size tire you are running. Eddie at crawler innovations used to make a 7.25" closed cell foam and also a 7.75" as well. My hopes is to have Eddie produce these again, or at least another run of them. Keep in mind that these foams will be for a 115mm or 4.5" wheel.
Last edited by THX_138; 10-25-2014 at 10:14 AM. |
Sponsored Links | |
08-28-2014, 06:24 AM | #2 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
| Re: Gauging interest for super foams from CI
Was lucky enough to get one of the last sets when Eddie built my super Voodoos. If I ever need another set it would be nice to have them available.
|
08-28-2014, 06:34 AM | #3 |
I wanna be Dave Join Date: May 2010 Location: Stowe
Posts: 3,987
| Re: Gauging interest for super foams from CI
I would be interested also, I don't have my rig yet so I am not sure what size tires are on it and what size foams I might need. |
08-28-2014, 08:05 AM | #4 |
Quarry Creeper Join Date: Jan 2014 Location: Western Wa. Mose Capital of the World
Posts: 275
| Re: Gauging interest for super foams from CI
I'd be interested in at least 2 sets of ( 8 ea.) 7 3/4 super foams Tom G Last edited by Tom G; 08-29-2014 at 07:58 AM. |
08-28-2014, 08:07 AM | #5 | |
Quarry Creeper Join Date: Jan 2014 Location: Western Wa. Mose Capital of the World
Posts: 275
| Re: Gauging interest for super foams from CI Quote:
| |
08-28-2014, 09:34 AM | #6 |
Quarry Creeper Join Date: Jul 2007 Location: WA
Posts: 333
| Re: Gauging interest for super foams from CI
Here i am and yes please. Id like 7.75 as well for my 8" voodoos. Ive wanted to mess around with comp cutting them but until available im stuck. Id be down for 2 full sets. |
08-28-2014, 11:49 AM | #7 |
5th D Owner/Driver Join Date: Dec 2005 Location: Snoqualmie, Wa.
Posts: 1,916
| Re: Gauging interest for super foams from CI
I would be in for 2 full sets of 7.75" foams as well. |
08-28-2014, 12:03 PM | #8 |
Pebble Pounder Join Date: Nov 2011 Location: Sweden
Posts: 155
| Re: Gauging interest for super foams from CI
I would be in for at least one full set of 7.75". Probably 2 full sets.
|
08-28-2014, 01:09 PM | #9 |
Tire&Foam Extraordinaire Join Date: Jun 2007 Location: C.I. Compound, Tyler, Texas
Posts: 5,601
| Re: Gauging interest for super foams from CI
1st, thank you for starting the thread. 2nd, CI has Soft, Medium, & Firm Super Nova Outers in Stock. 3rd, I'm open to producing another run of either 7.25 or 7.75 inners. The 7.75" was the more popular size. I'd prefer one size or the other at this point due to how long they sit and how much space they take. 4th; Something that would benefit the sport/hobby & manufactures would be to create the Super Class Wheel, Tire, & Foam Guidelines. We have already wasted years not defining some basic guidelines and the true builders class of the supers has flat lined. Super Class wheel size & tire size MUST be DEFINED if you ever expect a manufacturer to invest the money. It takes money to make money. The upfront cost for a Super size Plastic wheel & rubber tire is scary. I've said it for years that the lack of guidelines is the class's own downfall. The "Pros" of the Super Class have all used 115mm wheels. No one competing has won with 3.2" or 3.8" wheels on the National Level in over five years. Make the standard wheel size 115mm for all USRCCA Supers. A standardized wheel size means that tires and foams can be based off it. The Super Nova line of dual stage foams used 115mm wheels. However I would still get interest in people wanting 3.2 or 3.8 super foams because it's what they had laying around. It makes no sense to me that you can throw anything together for a super. 1.9" Wheels are required in the 1.9" Class. 2.2" is required for 2.2"; but the Super Class can run anything except a 1.9 or 2.2? Does anyone else see the confusion in that logic? Or is it just me? Standards or Guidelines define a class and shape the products that will be made for it. |
08-28-2014, 01:13 PM | #10 |
RCC Addict Join Date: May 2012 Location: Folsom
Posts: 1,867
| Re: Gauging interest for super foams from CI
I run wheels with trencher side walls not sure what that is in mm but id be interested for sure.
|
08-28-2014, 01:18 PM | #11 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
| Re: Gauging interest for super foams from CI
Some super 6 bolts would be the cats meow.
|
08-28-2014, 01:25 PM | #12 |
I wanna be Dave Join Date: May 2010 Location: Stowe
Posts: 3,987
| Re: Gauging interest for super foams from CI |
08-28-2014, 05:17 PM | #13 |
Rock Crawler Join Date: May 2012 Location: Australia
Posts: 517
| Re: Gauging interest for super foams from CI
7.75 would be the better choice.
|
08-28-2014, 05:45 PM | #14 |
RCC Addict Join Date: May 2012 Location: Folsom
Posts: 1,867
| Re: Gauging interest for super foams from CI
Speaking of 115mm wheels... what tires are there with a 115mm bead?
|
08-28-2014, 06:31 PM | #15 | |
Rock Crawler Join Date: Mar 2009 Location: AZ
Posts: 789
| Re: Gauging interest for super foams from CI Quote:
I posted this in the rules committee section. You def have some good points that should be addressed. | |
08-28-2014, 06:56 PM | #16 |
Quarry Creeper Join Date: Jul 2007 Location: WA
Posts: 333
| Re: Gauging interest for super foams from CI |
08-29-2014, 08:43 AM | #17 |
Quarry Creeper Join Date: Jan 2014 Location: Western Wa. Mose Capital of the World
Posts: 275
| Re: Gauging interest for super foams from CI
The consequences seam's to be of those who have posted up like 7.75". A quick count of those that have posted so far would be 44 ea of the 7.75 inner's Since SUPER is a builders class ! if CI only offered 1 style say 7.75 inner's guys would adapt there needs. If someone like's larger then 40 series wheels they can re-cut the inner's to fit there need's. At least the option would be out there. Last edited by Tom G; 08-29-2014 at 08:49 AM. |
08-29-2014, 10:32 AM | #18 |
I wanna be Dave Join Date: Dec 2009 Location: .
Posts: 7,967
| Re: Gauging interest for super foams from CI
In a class that has been reduced to extremely low numbers I do not think rule changes that will make currently used wheels and tires illegal is a good decision.
|
08-29-2014, 10:35 AM | #19 |
E.Y. Designs Join Date: Sep 2011 Location: Springfield, OR
Posts: 3,591
| Re: Gauging interest for super foams from CI
If anyone needs tires I'll be here to make super tires as well |
08-29-2014, 05:29 PM | #20 |
Rock Crawler Join Date: Jun 2009 Location: SF
Posts: 604
| Re: Gauging interest for super foams from CI
I'm very interested in this thread. I would be in to super foams, not sure what size my wheels are... Dlux wheels with Moab xL sidewalls. The BIGGEST argument I hear for not building a super is "no one makes tires". If a standard wheel size was adopted, someone could make a crawler specific tire for them (wishful thinking), possibly pushing the class forward in the long term. I agree that this could bump some people to illegal wheels on their rigs, but let's think long term.... If a wheel size was adopted, would it be fair to phase out old sizes by starting a comps with more points than 0... Meaning you start with 2 points in 2015... start with 4 points in 2016... You start with 6 points in 2017... It would give encouragement to change wheels, while not omitting anyone with other size wheels on their rigs. Whatever happens, I love driving my super berg, I'd buy 2 complete sets of foams. I'll send my paypal now as a preorder if you would like... If they are too big to store, I'll keep all of CI's stock in my basement and ship them out as they sell. |
Gauging interest for super foams from CI - Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
gauging interest in a RC crawl event | goblin79 | Competitions | 7 | 05-22-2009 11:58 AM |
Casual crawl in Haltom City...gauging interest. | billet works | Texas | 6 | 04-01-2008 09:43 PM |
| |